X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=Makefile;h=6d4e007e57ab156bf55529ea64ecf809ef5088e5;hb=refs%2Fheads%2Fvserver;hp=a1195635869ba4538bd32f444bc4dfa024d6463c;hpb=c7b5ebbddf7bcd3651947760f423e3783bbe6573;p=linux-2.6.git

diff --git a/Makefile b/Makefile
index a11956358..6d4e007e5 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 9
-EXTRAVERSION = -vs1.9.3
-NAME=Zonked Quokka
+SUBLEVEL = 20
+EXTRAVERSION = -1.2949.fc6.vs2.2.0.1
+NAME = Homicidal Dwarf Hamster
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -10,15 +10,18 @@ NAME=Zonked Quokka
 # Comments in this file are targeted only to the developer, do not
 # expect to learn how to build the kernel reading this file.
 
-# Do not print "Entering directory ..."
-MAKEFLAGS += --no-print-directory
+# Do not:
+# o  use make's built-in rules and variables
+#    (this increases performance and avoid hard-to-debug behavour);
+# o  print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
 
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.
 #
 # Most importantly: sub-Makefiles should only ever modify files in
 # their own directory. If in some directory we have a dependency on
-# a file in another dir (which doesn't happen often, but it's of
+# a file in another dir (which doesn't happen often, but it's often
 # unavoidable when linking the built-in.o targets which finally
 # turn into vmlinux), we will call a sub make in that other dir, and
 # after that we are sure that everything which is in that other dir
@@ -41,8 +44,15 @@ ifndef KBUILD_VERBOSE
   KBUILD_VERBOSE = 0
 endif
 
-# Call sparse as part of compilation of C files
-# Use 'make C=1' to enable sparse checking
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
 
 ifdef C
   ifeq ("$(origin C)", "command line")
@@ -67,18 +77,19 @@ endif
 
 
 # kbuild supports saving output files in a separate directory.
-# To locate output files in a separate directory two syntax'es are supported.
+# To locate output files in a separate directory two syntaxes are supported.
 # In both cases the working directory must be the root of the kernel src.
 # 1) O=
 # Use "make O=dir/to/store/output/files/"
-# 
+#
 # 2) Set KBUILD_OUTPUT
 # Set the environment variable KBUILD_OUTPUT to point to the directory
 # where the output files shall be placed.
 # export KBUILD_OUTPUT=dir/to/store/output/files/
 # make
 #
-# The O= assigment takes precedence over the KBUILD_OUTPUT environment variable.
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
 
 
 # KBUILD_SRC is set on invocation of make in OBJ directory
@@ -94,7 +105,7 @@ ifdef O
 endif
 
 # That's our default target when none is given on the command line
-.PHONY: _all
+PHONY := _all
 _all:
 
 ifneq ($(KBUILD_OUTPUT),)
@@ -105,13 +116,12 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 $(if $(KBUILD_OUTPUT),, \
      $(error output directory "$(saved-output)" does not exist))
 
-.PHONY: $(MAKECMDGOALS)
+PHONY += $(MAKECMDGOALS)
 
 $(filter-out _all,$(MAKECMDGOALS)) _all:
-	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT)		\
-	KBUILD_SRC=$(CURDIR)	     KBUILD_VERBOSE=$(KBUILD_VERBOSE)	\
-	KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)"	\
-        -f $(CURDIR)/Makefile $@
+	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+	KBUILD_SRC=$(CURDIR) \
+	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
 
 # Leave processing to above invocation of make
 skip-makefile := 1
@@ -123,7 +133,7 @@ ifeq ($(skip-makefile),)
 
 # If building an external module we do not care about the all: rule
 # but instead _all depend on modules
-.PHONY: all
+PHONY += all
 ifeq ($(KBUILD_EXTMOD),)
 _all: all
 else
@@ -137,29 +147,10 @@ objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
-VPATH		:= $(srctree)
+VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
 export srctree objtree VPATH TOPDIR
 
-nullstring :=
-space      := $(nullstring) # end of line
-
-# Take the contents of any files called localversion* and the config
-# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be
-# careful not to include files twice if building in the source
-# directory. LOCALVERSION from the command line override all of this
-
-ifeq ($(objtree),$(srctree))
-localversion-files := $(wildcard $(srctree)/localversion*)
-else
-localversion-files := $(wildcard $(objtree)/localversion* $(srctree)/localversion*)
-endif
-
-LOCALVERSION = $(subst $(space),, \
-	       $(shell cat /dev/null $(localversion-files)) \
-	       $(subst ",,$(CONFIG_LOCALVERSION)))
-
-KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 # first, and if a usermode build is happening, the "ARCH=um" on the command
@@ -169,7 +160,8 @@ KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
 
 SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
-				  -e s/s390x/s390/ -e s/parisc64/parisc/ )
+				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------
@@ -196,18 +188,20 @@ CROSS_COMPILE	?=
 # Architecture as present in compile.h
 UTS_MACHINE := $(ARCH)
 
+KCONFIG_CONFIG	?= .config
+
 # SHELL used by kbuild
 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 	  else if [ -x /bin/bash ]; then echo /bin/bash; \
 	  else echo sh; fi ; fi)
 
-HOSTCC  	= gcc
-HOSTCXX  	= g++
-HOSTCFLAGS	= -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-HOSTCXXFLAGS	= -O2
+HOSTCC       = gcc
+HOSTCXX      = g++
+HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
 
-# 	Decide whether to build built-in, modular, or both.
-#	Normally, just do built-in.
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
 
 KBUILD_MODULES :=
 KBUILD_BUILTIN := 1
@@ -215,7 +209,7 @@ KBUILD_BUILTIN := 1
 #	If we have only "make modules", don't compile built-in objects.
 #	When we're building modules with modversions, we need to consider
 #	the built-in objects during the descend as well, in order to
-#	make sure the checksums are uptodate before we record them.
+#	make sure the checksums are up to date before we record them.
 
 ifeq ($(MAKECMDGOALS),modules)
   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
@@ -233,7 +227,7 @@ ifeq ($(MAKECMDGOALS),)
   KBUILD_MODULES := 1
 endif
 
-export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
+export KBUILD_MODULES KBUILD_BUILTIN
 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 
 # Beautify output
@@ -248,10 +242,10 @@ export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 #
 # If $(quiet) is empty, the whole command will be printed.
 # If it is set to "quiet_", only the short version will be printed. 
-# If it is set to "silent_", nothing wil be printed at all, since
+# If it is set to "silent_", nothing will be printed at all, since
 # the variable $(silent_cmd_cc_o_c) doesn't exist.
 #
-# A simple variant is to prefix commands with $(Q) - that's usefull
+# A simple variant is to prefix commands with $(Q) - that's useful
 # for commands that shall be hidden in non-verbose mode.
 #
 #	$(Q)ln $@ :<
@@ -276,38 +270,12 @@ endif
 
 export quiet Q KBUILD_VERBOSE
 
-######
-# cc support functions to be used (only) in arch/$(ARCH)/Makefile
-# See documentation in Documentation/kbuild/makefiles.txt
-
-# cc-option
-# Usage: cflags-y += $(call gcc-option, -march=winchip-c6, -march=i586)
-
-cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
-             > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
-
-# For backward compatibility
-check_gcc = $(warning check_gcc is deprecated - use cc-option) \
-            $(call cc-option, $(1),$(2))
-
-# cc-option-yn
-# Usage: flag := $(call gcc-option-yn, -march=winchip-c6)
-cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
-                > /dev/null 2>&1; then echo "y"; else echo "n"; fi;)
-
-# cc-version
-# Usage gcc-ver := $(call cc-version $(CC))
-cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
-              $(if $(1), $(1), $(CC)))
-
 
 # Look for make include files relative to root of kernel src
 MAKEFLAGS += --include-dir=$(srctree)
 
-# For maximum performance (+ possibly random breakage, uncomment
-# the following)
-
-#MAKEFLAGS += -rR
+# We need some generic definitions.
+include $(srctree)/scripts/Kbuild.include
 
 # Make variables (CC, etc...)
 
@@ -326,7 +294,8 @@ DEPMOD		= /sbin/depmod
 KALLSYMS	= scripts/kallsyms
 PERL		= perl
 CHECK		= sparse
-CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__
+
+CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
 MODFLAGS	= -DMODULE
 CFLAGS_MODULE   = $(MODFLAGS)
 AFLAGS_MODULE   = $(MODFLAGS)
@@ -334,26 +303,30 @@ LDFLAGS_MODULE  = -r
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 
-NOSTDINC_FLAGS  = -nostdinc -iwithprefix include
 
 # Use LINUXINCLUDE when you must reference the include/ directory.
 # Needed to be compatible with the O= option
 LINUXINCLUDE    := -Iinclude \
-                   $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
+                   $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
+		   -include include/linux/autoconf.h
 
 CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE)
 
-CFLAGS 		:= -Wall -Wstrict-prototypes -Wno-trigraphs \
-	  	   -fno-strict-aliasing -fno-common
-AFLAGS		:= -D__ASSEMBLY__
+CFLAGS          := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+                   -fno-strict-aliasing -fno-common -Wstrict-prototypes -Wundef -Werror-implicit-function-declaration
+AFLAGS          := -D__ASSEMBLY__
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
-export	VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \
-	ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
-	CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
-	HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 
 export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE 
+export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
 export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 
 # When compiling out-of-tree modules, put MODVERDIR in the module
@@ -361,34 +334,44 @@ export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 # even be read-only.
 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-comma := ,
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
 # Files to ignore in find ... statements
 
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc \) -prune -o
-RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
 
 # ===========================================================================
 # Rules shared between *config targets and build targets
 
 # Basic helpers built in scripts/
-.PHONY: scripts_basic
+PHONY += scripts_basic
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
 
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
+
 # To make sure we do not include .config for any of the *config targets
 # catch them early, and hand them over to scripts/kconfig/Makefile
 # It is allowed to specify more targets when calling make, including
 # mixing *config targets and build targets.
-# For example 'make oldconfig all'. 
+# For example 'make oldconfig all'.
 # Detect when mixed targets is specified, and make a second invocation
 # of make so .config is not included in this case either (for *config).
 
 no-dot-config-targets := clean mrproper distclean \
-			 cscope TAGS tags help %docs check%
+			 cscope TAGS tags help %docs check% \
+			 include/linux/version.h headers_% \
+			 kernelrelease kernelversion
 
 config-targets := 0
 mixed-targets  := 0
@@ -423,9 +406,14 @@ ifeq ($(config-targets),1)
 # *config targets only - make sure prerequisites are updated, and descend
 # in scripts/kconfig to make the *config target
 
-config: scripts_basic FORCE
-	$(Q)$(MAKE) $(build)=scripts/kconfig $@
-%config: scripts_basic FORCE
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'
+include $(srctree)/arch/$(ARCH)/Makefile
+export KBUILD_DEFCONFIG
+
+config %config: scripts_basic outputmakefile FORCE
+	$(Q)mkdir -p include/linux include/config
 	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 
 else
@@ -436,13 +424,11 @@ else
 ifeq ($(KBUILD_EXTMOD),)
 # Additional helpers built in scripts/
 # Carefully list dependencies so we do not try to build scripts twice
-# in parrallel
-.PHONY: scripts
-scripts: scripts_basic include/config/MARKER
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf
 	$(Q)$(MAKE) $(build)=$(@)
 
-scripts_basic: include/linux/autoconf.h
-
 # Objects we will link into vmlinux / subdirs we need to visit
 init-y		:= init/
 drivers-y	:= drivers/ sound/
@@ -452,32 +438,48 @@ core-y		:= usr/
 endif # KBUILD_EXTMOD
 
 ifeq ($(dot-config),1)
-# In this section, we need .config
+# Read in config
+-include include/config/auto.conf
 
+ifeq ($(KBUILD_EXTMOD),)
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
--include .config.cmd
-
-include .config
+-include include/config/auto.conf.cmd
 
-# If .config needs to be updated, it will be done via the dependency
-# that autoconf has on .config.
 # To avoid any implicit rule to kick in, define an empty command
-.config: ;
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 
-# If .config is newer than include/linux/autoconf.h, someone tinkered
-# with it and forgot to run make oldconfig
-include/linux/autoconf.h: .config
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+else
+# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/linux/autoconf.h -a -e $@ || (		\
+	echo;								\
+	echo "  ERROR: Kernel configuration is invalid.";		\
+	echo "         include/linux/autoconf.h or $@ are missing.";	\
+	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo;								\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
+
 else
 # Dummy target needed, because used as prerequisite
-include/linux/autoconf.h: ;
-endif
+include/config/auto.conf: ;
+endif # $(dot-config)
 
 # The all: target is the default when no target is given on the
 # command line.
 # This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overriden in the arch makefile
+# Defaults vmlinux but it is usually overridden in the arch makefile
 all: vmlinux
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
@@ -486,7 +488,11 @@ else
 CFLAGS		+= -O2
 endif
 
-ifndef CONFIG_FRAME_POINTER
+include $(srctree)/arch/$(ARCH)/Makefile
+
+ifdef CONFIG_FRAME_POINTER
+CFLAGS		+= -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
+else
 CFLAGS		+= -fomit-frame-pointer
 endif
 
@@ -494,37 +500,60 @@ ifdef CONFIG_DEBUG_INFO
 CFLAGS		+= -g
 endif
 
+# Force gcc to behave correct even for buggy distributions
+CFLAGS          += $(call cc-option, -fno-stack-protector)
+
+# arch Makefile may override CC so keep this after arch Makefile is included
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS     += $(NOSTDINC_FLAGS)
+
 # warn about C99 declaration after statement
 CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 
-include $(srctree)/arch/$(ARCH)/Makefile
+# disable pointer signed / unsigned warnings in gcc 4.0
+CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # Default kernel image to build when no specific target is given.
-# KBUILD_IMAGE may be overruled on the commandline or
+# KBUILD_IMAGE may be overruled on the command line or
 # set in the environment
-# Also any assingments in arch/$(ARCH)/Makefiel take precedence over
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
 # this default value
 export KBUILD_IMAGE ?= vmlinux
 
 #
 # INSTALL_PATH specifies where to place the updated kernel and system map
-# images.  Uncomment if you want to place them anywhere other than root.
-#
-
-#export	INSTALL_PATH=/boot
+# images. Default is /boot, but you can set it to other values
+export	INSTALL_PATH ?= /boot
 
 #
 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 # relocations required by build roots.  This is not defined in the
-# makefile but the arguement can be passed to make if needed.
+# makefile but the argument can be passed to make if needed.
 #
 
-MODLIB	:= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 export MODLIB
 
+#
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP will used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
+
 
 ifeq ($(KBUILD_EXTMOD),)
-core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/
+core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
 
 vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
@@ -545,7 +574,7 @@ libs-y		:= $(libs-y1) $(libs-y2)
 
 # Build vmlinux
 # ---------------------------------------------------------------------------
-# vmlinux is build from the objects selected by $(vmlinux-init) and
+# vmlinux is built from the objects selected by $(vmlinux-init) and
 # $(vmlinux-main). Most are built-in.o files from top-level directories
 # in the kernel tree, others are specified in arch/$(ARCH)Makefile.
 # Ordering when linking is important, and $(vmlinux-init) must be first.
@@ -586,30 +615,37 @@ quiet_cmd_vmlinux__ ?= LD      $@
 # Generate new vmlinux version
 quiet_cmd_vmlinux_version = GEN     .version
       cmd_vmlinux_version = set -e;                     \
-	. $(srctree)/scripts/mkversion > .tmp_version;	\
-	mv -f .tmp_version .version;			\
+	if [ ! -r .version ]; then			\
+	  rm -f .version;				\
+	  echo 1 >.version;				\
+	else						\
+	  mv .version .old_version;			\
+	  expr 0$$(cat .old_version) + 1 >.version;	\
+	fi;						\
 	$(MAKE) $(build)=init
 
 # Generate System.map
-quiet_cmd_sysmap = SYSMAP 
+quiet_cmd_sysmap = SYSMAP
       cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 
 # Link of vmlinux
 # If CONFIG_KALLSYMS is set .version is already updated
 # Generate System.map and verify that the content is consistent
-
+# Use + in front of the vmlinux_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
 define rule_vmlinux__
+	:
 	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
 
 	$(call cmd,vmlinux__)
 	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
 
-	$(Q)$(if $($(quiet)cmd_sysmap),                 \
-	  echo '  $($(quiet)cmd_sysmap) System.map' &&) \
-	$(cmd_sysmap) $@ System.map;                    \
-	if [ $$? -ne 0 ]; then                          \
-		rm -f $@;                               \
-		/bin/false;                             \
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
+	$(cmd_sysmap) $@ System.map;                                         \
+	if [ $$? -ne 0 ]; then                                               \
+		rm -f $@;                                                    \
+		/bin/false;                                                  \
 	fi;
 	$(verify_kallsyms)
 endef
@@ -642,19 +678,21 @@ endif
 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
 
 define verify_kallsyms
-	$(Q)$(if $($(quiet)cmd_sysmap),                       \
-	  echo '  $($(quiet)cmd_sysmap) .tmp_System.map' &&)  \
+	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
+	  echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
 	  $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
-	$(Q)cmp -s System.map .tmp_System.map ||              \
-		(echo Inconsistent kallsyms data;             \
-		 echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
+	$(Q)cmp -s System.map .tmp_System.map ||                             \
+		(echo Inconsistent kallsyms data;                            \
+		 echo Try setting CONFIG_KALLSYMS_EXTRA_PASS;                \
 		 rm .tmp_kallsyms* ; /bin/false )
 endef
 
 # Update vmlinux version before link
 # Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
 cmd_ksym_ld = $(cmd_vmlinux__)
 define rule_ksym_ld
+	: 
 	+$(call cmd,vmlinux_version)
 	$(call cmd,vmlinux__)
 	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
@@ -684,11 +722,26 @@ quiet_cmd_kallsyms = KSYM    $@
 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 $(KALLSYMS): scripts ;
 
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+	($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
 endif # ifdef CONFIG_KALLSYMS
 
 # vmlinux image - including updated kernel symbols
 vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE
+ifdef CONFIG_HEADERS_CHECK
+	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
+endif
 	$(call if_changed_rule,vmlinux__)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
+	$(Q)rm -f .old_version
 
 # The actual objects are generated when descending, 
 # make sure no implicit rule kicks in
@@ -700,36 +753,94 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
 # make menuconfig etc.
 # Error messages still appears in the original language
 
-.PHONY: $(vmlinux-dirs)
-$(vmlinux-dirs): prepare-all scripts
+PHONY += $(vmlinux-dirs)
+$(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
+# Build the kernel release string
+#
+# The KERNELRELEASE value built here is stored in the file
+# include/config/kernel.release, and is used when executing several
+# make targets, such as "make install" or "make modules_install."
+#
+# The eventual kernel release string consists of the following fields,
+# shown in a hierarchical format to show how smaller parts are concatenated
+# to form the larger and final value, with values coming from places like
+# the Makefile, kernel config options, make command line options and/or
+# SCM tag information.
+#
+#	$(KERNELVERSION)
+#	  $(VERSION)			eg, 2
+#	  $(PATCHLEVEL)			eg, 6
+#	  $(SUBLEVEL)			eg, 18
+#	  $(EXTRAVERSION)		eg, -rc6
+#	$(localver-full)
+#	  $(localver)
+#	    localversion*		(all localversion* files)
+#	    $(CONFIG_LOCALVERSION)	(from kernel config setting)
+#	  $(localver-auto)		(only if CONFIG_LOCALVERSION_AUTO is set)
+#	    ./scripts/setlocalversion	(SCM tag, if one exists)
+#	    $(LOCALVERSION)		(from make command line if provided)
+#
+#  Note how the final $(localver-auto) string is included *only* if the
+# kernel config option CONFIG_LOCALVERSION_AUTO is selected.  Also, at the
+# moment, only git is supported but other SCMs can edit the script
+# scripts/setlocalversion and add the appropriate checks as needed.
+
+nullstring :=
+space      := $(nullstring) # end of line
+
+___localver = $(objtree)/localversion* $(srctree)/localversion*
+__localver  = $(sort $(wildcard $(___localver)))
+# skip backup files (containing '~')
+_localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f)))
+
+localver = $(subst $(space),, \
+	   $(shell cat /dev/null $(_localver)) \
+	   $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
+
+# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
+# and if the SCM is know a tag from the SCM is appended.
+# The appended tag is determined by the SCM used.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+ifdef CONFIG_LOCALVERSION_AUTO
+	_localver-auto = $(shell $(CONFIG_SHELL) \
+	                  $(srctree)/scripts/setlocalversion $(srctree))
+	localver-auto  = $(LOCALVERSION)$(_localver-auto)
+endif
+
+localver-full = $(localver)$(localver-auto)
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+kernelrelease = $(KERNELVERSION)$(localver-full)
+include/config/kernel.release: include/config/auto.conf FORCE
+	$(Q)rm -f $@
+	$(Q)echo $(kernelrelease) > $@
+
+
 # Things we need to do before we recursively start building the kernel
-# or the modules are listed in "prepare-all".
-# A multi level approach is used. prepare1 is updated first, then prepare0.
-# prepare-all is the collection point for the prepare targets.
-
-.PHONY: prepare-all prepare prepare0 prepare1 prepare2
-
-# prepare 2 generate Makefile to be placed in output directory, if
-# using a seperate output directory. This allows convinient use
-# of make in output directory
-prepare2:
-	$(Q)if /usr/bin/env test ! $(srctree) -ef $(objtree); then \
-	$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile              \
-	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)         \
-	    > $(objtree)/Makefile;                                 \
-	fi
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
 
-# prepare1 is used to check if we are building in a separate output directory,
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare-all is deprecated, use prepare as valid replacement
+PHONY += prepare-all
+
+# prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
 # 1) Check that make has not been executed in the kernel src $(srctree)
 # 2) Create the include2 directory, used for the second asm symlink
-
-prepare1: prepare2
+prepare3: include/config/kernel.release
 ifneq ($(KBUILD_SRC),)
 	@echo '  Using $(srctree) as source for kernel'
-	$(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \
+	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
 		echo "  $(srctree) is not clean, please run 'make mrproper'";\
 		echo "  in the '$(srctree)' directory.";\
 		/bin/false; \
@@ -738,54 +849,38 @@ ifneq ($(KBUILD_SRC),)
 	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
 endif
 
-prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile
+
+prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
+                   include/asm include/config/auto.conf
 ifneq ($(KBUILD_MODULES),)
-	$(Q)rm -rf $(MODVERDIR)
 	$(Q)mkdir -p $(MODVERDIR)
+	$(Q)rm -f $(MODVERDIR)/*
 endif
 
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+	$(Q)$(MAKE) $(build)=.
+
 # All the preparing..
-prepare-all: prepare0 prepare
+prepare prepare-all: prepare0
 
-#	Leave this as default for preprocessing vmlinux.lds.S, which is now
-#	done in arch/$(ARCH)/kernel/Makefile
+# Leave this as default for preprocessing vmlinux.lds.S, which is now
+# done in arch/$(ARCH)/kernel/Makefile
 
 export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 
-# Single targets
-# ---------------------------------------------------------------------------
-
-%.s: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.i: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%/:      scripts prepare FORCE
-	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
-%.lst: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.s: %.S scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.S scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-
-# 	FIXME: The asm symlink changes when $(ARCH) changes. That's
-#	hard to detect, but I suppose "make mrproper" is a good idea
-#	before switching between archs anyway.
+# FIXME: The asm symlink changes when $(ARCH) changes. That's
+# hard to detect, but I suppose "make mrproper" is a good idea
+# before switching between archs anyway.
 
 include/asm:
 	@echo '  SYMLINK $@ -> include/asm-$(ARCH)'
 	$(Q)if [ ! -d include ]; then mkdir -p include; fi;
 	@ln -fsn asm-$(ARCH) $@
 
-# 	Split autoconf.h into include/linux/config/*
-
-include/config/MARKER: include/linux/autoconf.h
-	@echo '  SPLIT   include/linux/autoconf.h -> include/config/*'
-	@scripts/basic/split-include include/linux/autoconf.h include/config
-	@touch $@
-
 # Generate some files
 # ---------------------------------------------------------------------------
 
@@ -793,55 +888,86 @@ include/config/MARKER: include/linux/autoconf.h
 # needs to be updated, so this check is forced on all builds
 
 uts_len := 64
+define filechk_utsrelease.h
+	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
+	  exit 1;                                                         \
+	fi;                                                               \
+	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
 
 define filechk_version.h
-	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
-	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
-	  exit 1; \
-	fi; \
-	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
-	  echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
-	 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
-	)
+	(echo \#define LINUX_VERSION_CODE $(shell                             \
+	expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL));     \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
 endef
 
 include/linux/version.h: $(srctree)/Makefile FORCE
 	$(call filechk,version.h)
 
+include/linux/utsrelease.h: include/config/kernel.release FORCE
+	$(call filechk,utsrelease.h)
+
 # ---------------------------------------------------------------------------
 
-.PHONY: depend dep
+PHONY += depend dep
 depend dep:
 	@echo '*** Warning: make $@ is unnecessary now.'
 
+# ---------------------------------------------------------------------------
+# Kernel headers
+INSTALL_HDR_PATH=$(objtree)/usr
+export INSTALL_HDR_PATH
+
+HDRARCHES=$(filter-out generic,$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
+
+PHONY += headers_install_all
+headers_install_all: include/linux/version.h scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
+	$(Q)for arch in $(HDRARCHES); do \
+	 $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch ;\
+	 done
+
+PHONY += headers_install
+headers_install: include/linux/version.h scripts_basic FORCE
+	@if [ ! -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+	  echo '*** Error: Headers not exportable for this architecture ($(ARCH))'; \
+	  exit 1 ; fi
+	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include
+
+PHONY += headers_check
+headers_check: headers_install
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include HDRCHECK=1
+
 # ---------------------------------------------------------------------------
 # Modules
 
 ifdef CONFIG_MODULES
 
-# 	By default, build modules as well
+# By default, build modules as well
 
 all: modules
 
 #	Build modules
 
-.PHONY: modules
+PHONY += modules
 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
 	@echo '  Building modules, stage 2.';
-	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
 
 
 # Target to prepare building external modules
-.PHONY: modules_prepare
-modules_prepare: prepare-all scripts
+PHONY += modules_prepare
+modules_prepare: prepare scripts
 
 # Target to install modules
-.PHONY: modules_install
+PHONY += modules_install
 modules_install: _modinst_ _modinst_post
 
-.PHONY: _modinst_
+PHONY += _modinst_
 _modinst_:
-	@if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
+	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
 		echo "Warning: you may need to install module-init-tools"; \
 		echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
 		sleep 1; \
@@ -854,7 +980,7 @@ _modinst_:
 		rm -f $(MODLIB)/build ; \
 		ln -s $(objtree) $(MODLIB)/build ; \
 	fi
-	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
 
 # If System.map exists, run depmod.  This deliberately does not have a
 # dependency on System.map since that would run the dependency tree on
@@ -866,9 +992,9 @@ depmod_opts	:=
 else
 depmod_opts	:= -b $(INSTALL_MOD_PATH) -r
 endif
-.PHONY: _modinst_post
+PHONY += _modinst_post
 _modinst_post: _modinst_
-	if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
+	if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
 
 else # CONFIG_MODULES
 
@@ -885,26 +1011,6 @@ modules modules_install: FORCE
 
 endif # CONFIG_MODULES
 
-# Generate asm-offsets.h 
-# ---------------------------------------------------------------------------
-
-define filechk_gen-asm-offsets
-	(set -e; \
-	 echo "#ifndef __ASM_OFFSETS_H__"; \
-	 echo "#define __ASM_OFFSETS_H__"; \
-	 echo "/*"; \
-	 echo " * DO NOT MODIFY."; \
-	 echo " *"; \
-	 echo " * This file was generated by arch/$(ARCH)/Makefile"; \
-	 echo " *"; \
-	 echo " */"; \
-	 echo ""; \
-	 sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \
-	 echo ""; \
-	 echo "#endif" )
-endef
-
-
 ###
 # Cleaning is done on three levels.
 # make clean     Delete most generated files
@@ -918,18 +1024,19 @@ CLEAN_FILES +=	vmlinux System.map \
                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config include2
-MRPROPER_FILES += .config .config.old include/asm .version \
-                  include/linux/autoconf.h include/linux/version.h \
-                  Module.symvers tags TAGS cscope*
+MRPROPER_DIRS  += include/config include2 usr/include
+MRPROPER_FILES += .config .config.old include/asm .version .old_version \
+                  include/linux/autoconf.h include/linux/version.h      \
+                  include/linux/utsrelease.h                            \
+		  Module.symvers tags TAGS cscope*
 
 # clean - Delete most, but leave enough to build external modules
 #
 clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
-clean-dirs      := $(addprefix _clean_,$(vmlinux-alldirs))
+clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
 
-.PHONY: $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
@@ -937,8 +1044,9 @@ clean: archclean $(clean-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
 	@find . $(RCS_FIND_IGNORE) \
-	 	\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
+		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+		-o -name '*.symtypes' \) \
 		-type f -print | xargs rm -f
 
 # mrproper - Delete all generated files, including .config
@@ -947,7 +1055,7 @@ mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
 
-.PHONY: $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper archmrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
@@ -957,13 +1065,13 @@ mrproper: clean archmrproper $(mrproper-dirs)
 
 # distclean
 #
-.PHONY: distclean
+PHONY += distclean
 
 distclean: mrproper
 	@find $(srctree) $(RCS_FIND_IGNORE) \
-	 	\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
 		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-	 	-o -name '.*.rej' -o -size 0 \
+		-o -name '.*.rej' -o -size 0 \
 		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
 		-type f -print | xargs rm -f
 
@@ -973,12 +1081,10 @@ distclean: mrproper
 # rpm target kept for backward compatibility
 package-dir	:= $(srctree)/scripts/package
 
-.PHONY: %-pkg rpm
-
-%pkg: FORCE
-	$(Q)$(MAKE) -f $(package-dir)/Makefile $@
-rpm: FORCE
-	$(Q)$(MAKE) -f $(package-dir)/Makefile $@
+%pkg: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
 
 
 # Brief documentation of the typical targets used
@@ -989,8 +1095,10 @@ boards := $(notdir $(boards))
 
 help:
 	@echo  'Cleaning targets:'
-	@echo  '  clean		  - remove most generated files but keep the config'
-	@echo  '  mrproper	  - remove all generated files + config + various backup files'
+	@echo  '  clean		  - Remove most generated files but keep the config and'
+	@echo  '                    enough build support to build external modules'
+	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
+	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
 	@echo  ''
 	@echo  'Configuration targets:'
 	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
@@ -999,21 +1107,29 @@ help:
 	@echo  '  all		  - Build all targets marked with [*]'
 	@echo  '* vmlinux	  - Build the bare kernel'
 	@echo  '* modules	  - Build all modules'
-	@echo  '  modules_install - Install all modules'
+	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[ois]  - Build specified target only'
+	@echo  '  dir/file.ko     - Build module including final link'
 	@echo  '  rpm		  - Build a kernel as an RPM package'
 	@echo  '  tags/TAGS	  - Generate tags file for editors'
 	@echo  '  cscope	  - Generate cscope index'
+	@echo  '  kernelrelease	  - Output the release version string'
+	@echo  '  kernelversion	  - Output the version stored in Makefile'
+	@if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+	 echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
+	 fi
 	@echo  ''
 	@echo  'Static analysers'
-	@echo  '  buildcheck      - List dangling references to vmlinux discarded sections'
-	@echo  '                    and init sections from non-init sections'
 	@echo  '  checkstack      - Generate a list of stack hogs'
 	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
+	@if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+	 echo  '  headers_check   - Sanity check on exported headers'; \
+	 fi
 	@echo  ''
 	@echo  'Kernel packaging:'
-	@$(MAKE) -f $(package-dir)/Makefile help
+	@$(MAKE) $(build)=$(package-dir) help
 	@echo  ''
 	@echo  'Documentation targets:'
 	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
@@ -1028,9 +1144,10 @@ help:
 		echo '')
 
 	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
 	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
-	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse)'
-	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK (sparse)'
+	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
 	@echo  ''
 	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
 	@echo  'For further info see the ./README file'
@@ -1057,31 +1174,58 @@ else # KBUILD_EXTMOD
 # make M=dir modules   Make all modules in specified dir
 # make M=dir	       Same as 'make M=dir modules'
 # make M=dir modules_install
-#                      Install the modules build in the module directory
+#                      Install the modules built in the module directory
 #                      Assumes install directory is already created
 
 # We are always building modules
 KBUILD_MODULES := 1
-.PHONY: crmodverdir
+PHONY += crmodverdir
 crmodverdir:
 	$(Q)mkdir -p $(MODVERDIR)
+	$(Q)rm -f $(MODVERDIR)/*
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+	@test -e $(objtree)/Module.symvers || ( \
+	echo; \
+	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+	echo "           is missing; modules will have no dependencies and modversions."; \
+	echo )
 
 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
-.PHONY: $(module-dirs) modules
-$(module-dirs): crmodverdir
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
 	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
 
 modules: $(module-dirs)
 	@echo '  Building modules, stage 2.';
-	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
-
-.PHONY: modules_install
-modules_install:
-	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+	$(Q)mkdir -p $(MODLIB)/$(install-dir)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+# Run depmod only is we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
+      cmd_depmod = if [ -r System.map -a -x $(DEPMOD) ]; then \
+                      $(DEPMOD) -ae -F System.map             \
+                      $(if $(strip $(INSTALL_MOD_PATH)),      \
+		      -b $(INSTALL_MOD_PATH) -r)              \
+		      $(KERNELRELEASE);                       \
+                   fi
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+	$(call cmd,depmod)
 
 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
 
-.PHONY: $(clean-dirs) clean
+PHONY += $(clean-dirs) clean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
@@ -1089,7 +1233,7 @@ clean:	rm-dirs := $(MODVERDIR)
 clean: $(clean-dirs)
 	$(call cmd,rmdirs)
 	@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
-	 	\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
 		-type f -print | xargs rm -f
 
@@ -1101,53 +1245,121 @@ help:
 	@echo  '  modules_install - install the module'
 	@echo  '  clean           - remove generated files in module directory only'
 	@echo  ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
 endif # KBUILD_EXTMOD
 
 # Generate tags for editors
 # ---------------------------------------------------------------------------
 
-define all-sources
-	( find $(srctree) $(RCS_FIND_IGNORE) \
+#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
+#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
+#Adding $(srctree) adds about 20M on i386 to the size of the output file!
+
+ifeq ($(src),$(obj))
+__srctree =
+else
+__srctree = $(srctree)/
+endif
+
+ifeq ($(ALLSOURCE_ARCHS),)
+ifeq ($(ARCH),um)
+ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
+else
+ALLINCLUDE_ARCHS := $(ARCH)
+endif
+else
+#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
+ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
+endif
+
+ALLSOURCE_ARCHS := $(ARCH)
+
+define find-sources
+        ( find $(__srctree) $(RCS_FIND_IGNORE) \
 	       \( -name include -o -name arch \) -prune -o \
-	       -name '*.[chS]' -print; \
-	  find $(srctree)/arch/$(ARCH) $(RCS_FIND_IGNORE) \
-	       -name '*.[chS]' -print; \
-	  find $(srctree)/security/selinux/include $(RCS_FIND_IGNORE) \
-	       -name '*.[chS]' -print; \
-	  find $(srctree)/include $(RCS_FIND_IGNORE) \
+	       -name $1 -print; \
+	  for ARCH in $(ALLSOURCE_ARCHS) ; do \
+	       find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+	            -name $1 -print; \
+	  done ; \
+	  find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
+	       -name $1 -print; \
+	  find $(__srctree)include $(RCS_FIND_IGNORE) \
 	       \( -name config -o -name 'asm-*' \) -prune \
-	       -o -name '*.[chS]' -print; \
-	  find $(srctree)/include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
-	       -name '*.[chS]' -print; \
-	  find $(srctree)/include/asm-generic $(RCS_FIND_IGNORE) \
-	       -name '*.[chS]' -print )
+	       -o -name $1 -print; \
+	  for ARCH in $(ALLINCLUDE_ARCHS) ; do \
+	       find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+	            -name $1 -print; \
+	  done ; \
+	  find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
+	       -name $1 -print )
+endef
+
+define all-sources
+	$(call find-sources,'*.[chS]')
+endef
+define all-kconfigs
+	$(call find-sources,'Kconfig*')
+endef
+define all-defconfigs
+	$(call find-sources,'defconfig')
+endef
+
+define xtags
+	if $1 --version 2>&1 | grep -iq exuberant; then \
+	    $(all-sources) | xargs $1 -a \
+		-I __initdata,__exitdata,__acquires,__releases \
+		-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
+		--extra=+f --c-kinds=+px \
+		--regex-asm='/ENTRY\(([^)]*)\).*/\1/'; \
+	    $(all-kconfigs) | xargs $1 -a \
+		--langdef=kconfig \
+		--language-force=kconfig \
+		--regex-kconfig='/^[[:blank:]]*config[[:blank:]]+([[:alnum:]_]+)/\1/'; \
+	    $(all-defconfigs) | xargs -r $1 -a \
+		--langdef=dotconfig \
+		--language-force=dotconfig \
+		--regex-dotconfig='/^#?[[:blank:]]*(CONFIG_[[:alnum:]_]+)/\1/'; \
+	elif $1 --version 2>&1 | grep -iq emacs; then \
+	    $(all-sources) | xargs $1 -a; \
+	    $(all-kconfigs) | xargs $1 -a \
+		--regex='/^[ \t]*config[ \t]+\([a-zA-Z0-9_]+\)/\1/'; \
+	    $(all-defconfigs) | xargs -r $1 -a \
+		--regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
+	else \
+	    $(all-sources) | xargs $1 -a; \
+	fi
 endef
 
 quiet_cmd_cscope-file = FILELST cscope.files
-      cmd_cscope-file = $(all-sources) > cscope.files
+      cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
 
 quiet_cmd_cscope = MAKE    cscope.out
-      cmd_cscope = cscope -k -b -q
+      cmd_cscope = cscope -b
 
 cscope: FORCE
 	$(call cmd,cscope-file)
 	$(call cmd,cscope)
 
 quiet_cmd_TAGS = MAKE   $@
-cmd_TAGS = $(all-sources) | etags -
+define cmd_TAGS
+	rm -f $@; \
+	$(call xtags,etags)
+endef
 
-# 	Exuberant ctags works better with -I
+TAGS: FORCE
+	$(call cmd,TAGS)
 
 quiet_cmd_tags = MAKE   $@
 define cmd_tags
 	rm -f $@; \
-	CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_NOVERS"`; \
-	$(all-sources) | xargs ctags $$CTAGSF -a
+	$(call xtags,ctags)
 endef
 
-TAGS: FORCE
-	$(call cmd,TAGS)
-
 tags: FORCE
 	$(call cmd,tags)
 
@@ -1155,11 +1367,6 @@ tags: FORCE
 # Scripts to check various things for consistency
 # ---------------------------------------------------------------------------
 
-configcheck:
-	find * $(RCS_FIND_IGNORE) \
-		-name '*.[hcS]' -type f -print | sort \
-		| xargs $(PERL) -w scripts/checkconfig.pl
-
 includecheck:
 	find * $(RCS_FIND_IGNORE) \
 		-name '*.[hcS]' -type f -print | sort \
@@ -1170,20 +1377,75 @@ versioncheck:
 		-name '*.[hcS]' -type f -print | sort \
 		| xargs $(PERL) -w scripts/checkversion.pl
 
-buildcheck:
-	$(PERL) $(srctree)/scripts/reference_discarded.pl
-	$(PERL) $(srctree)/scripts/reference_init.pl
-
 namespacecheck:
 	$(PERL) $(srctree)/scripts/namespace.pl
 
 endif #ifeq ($(config-targets),1)
 endif #ifeq ($(mixed-targets),1)
 
-.PHONY: checkstack
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here.  It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
 checkstack:
 	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
-	$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+
+kernelrelease:
+	$(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
+	$(error kernelrelease not valid - run 'make prepare' to update it))
+kernelversion:
+	@echo $(KERNELVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build whith mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+#  target-dir => where to store outputfile
+#  build-dir  => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+        build-dir  = $(patsubst %/,%,$(dir $@))
+        target-dir = $(dir $@)
+else
+        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/ %/: prepare scripts FORCE
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
+	$(build)=$(build-dir) $(@:.ko=.o)
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
 
 # FIXME Should go into a make.lib or something 
 # ===========================================================================
@@ -1197,7 +1459,7 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files))
 
 a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
 	  $(NOSTDINC_FLAGS) $(CPPFLAGS) \
-	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
 
 quiet_cmd_as_o_S = AS      $@
 cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
@@ -1212,82 +1474,19 @@ ifneq ($(cmd_files),)
   include $(cmd_files)
 endif
 
-# Execute command and generate cmd file
-if_changed = $(if $(strip $? \
-		          $(filter-out $(cmd_$(1)),$(cmd_$@))\
-			  $(filter-out $(cmd_$@),$(cmd_$(1)))),\
-	@set -e; \
-	$(if $($(quiet)cmd_$(1)),echo '  $(subst ','\'',$($(quiet)cmd_$(1)))';) \
-	$(cmd_$(1)); \
-	echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
-		          $(filter-out $(cmd_$(1)),$(cmd_$@))\
-			  $(filter-out $(cmd_$@),$(cmd_$(1)))),\
-	$(Q)set -e; \
-	$(if $($(quiet)cmd_$(1)),echo '  $(subst ','\'',$($(quiet)cmd_$(1)))';) \
-	$(cmd_$(1)); \
-	scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
-	rm -f $(depfile); \
-	mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? \
-		               $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\
-			       $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\
-	               $(Q)$(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-#	echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-#	$(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
-	@set -e;				\
-	echo '  CHK     $@';			\
-	mkdir -p $(dir $@);			\
-	$(filechk_$(1)) < $< > $@.tmp;		\
-	if [ -r $@ ] && cmp -s $@ $@.tmp; then	\
-		rm -f $@.tmp;			\
-	else					\
-		echo '  UPD     $@';		\
-		mv -f $@.tmp $@;		\
-	fi
-endef
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
 # Usage:
 # $(Q)$(MAKE) $(clean)=dir
 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
 
-#	$(call descend,<dir>,<target>)
-#	Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make does not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
 endif	# skip-makefile
 
+PHONY += FORCE
 FORCE:
+
+# Cancel implicit rules on top Makefile, `-rR' will apply to sub-makes.
+Makefile: ;
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+.PHONY: $(PHONY)