X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Farm%2Fmach-ixp2000%2Fpci.c;h=5a09a90c08fb7f3e36df1a2f2967e01616a6ea5e;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=831f8ffb6b61d200cf535637e612c4dbfc3ee917;hpb=6a77f38946aaee1cd85eeec6cf4229b204c15071;p=linux-2.6.git

diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 831f8ffb6..5a09a90c0 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,16 +28,15 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/mach-types.h>
 #include <asm/hardware.h>
 
 #include <asm/mach/pci.h>
 
-static int pci_master_aborts = 0;
+static volatile int pci_master_aborts = 0;
 
 static int clear_master_aborts(void);
 
-static u32 *
+u32 *
 ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
 {
 	u32 *paddress;
@@ -149,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re
 	local_irq_save(flags);
 	temp = *(IXP2000_PCI_CONTROL);
 	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
+		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 	}
 
 	temp = *(IXP2000_PCI_CMDSTAT);
@@ -179,8 +178,8 @@ clear_master_aborts(void)
 
 	local_irq_save(flags);
 	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {	
-		ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
+	if (temp & ((1 << 8) | (1 << 5))) {
+		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 	}
 
 	temp = *(IXP2000_PCI_CMDSTAT);
@@ -198,6 +197,19 @@ clear_master_aborts(void)
 void __init
 ixp2000_pci_preinit(void)
 {
+#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+	/*
+	 * Configure the PCI unit to properly byteswap I/O transactions,
+	 * and verify that it worked.
+	 */
+	ixp2000_reg_write(IXP2000_PCI_CONTROL,
+			  (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
+
+	if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
+		panic("IXP2000: PCI I/O is broken on this ixp model, and "
+			"the needed workaround has not been configured in");
+#endif
+
 	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS,
 				"PCI config cycle to non-existent device");
 }
@@ -208,15 +220,15 @@ ixp2000_pci_preinit(void)
  * use our own resource space.
  */
 static struct resource ixp2000_pci_mem_space = {
-	.start	= 0x00000000,
+	.start	= 0xe0000000,
 	.end	= 0xffffffff,
 	.flags	= IORESOURCE_MEM,
 	.name	= "PCI Mem Space"
 };
 
 static struct resource ixp2000_pci_io_space = {
-	.start	= 0x00000000,
-	.end	= 0xffffffff,
+	.start	= 0x00010000,
+	.end	= 0x0001ffff,
 	.flags	= IORESOURCE_IO,
 	.name	= "PCI I/O Space"
 };