X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap1%2Fclock.c;h=638490e62d5f5ebb7e07a21f586c521b9b2f2fe2;hb=refs%2Fheads%2Fvserver;hp=75110ba10424626e0f84539bfc2f70e7f603d0aa;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 75110ba10..638490e62 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,3 +1,4 @@ +//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text) /* * linux/arch/arm/mach-omap1/clock.c * @@ -19,7 +20,9 @@ #include #include +#include +#include #include #include #include @@ -270,8 +273,12 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) /* * In most cases we should not need to reprogram DPLL. * Reprogramming the DPLL is tricky, it must be done from SRAM. + * (on 730, bit 13 must always be 1) */ - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + if (cpu_is_omap730()) + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); + else + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); ck_dpll1.rate = ptr->pll_rate; propagate_rate(&ck_dpll1); @@ -345,7 +352,7 @@ static unsigned calc_ext_dsor(unsigned long rate) */ for (dsor = 2; dsor < 96; ++dsor) { if ((dsor & 1) && dsor > 8) - continue; + continue; if (rate >= 96000000 / dsor) break; } @@ -580,77 +587,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) *-------------------------------------------------------------------------*/ #ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. See also omap_late_clk_reset(). - */ -static inline void omap1_early_clk_reset(void) -{ - //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -} -static int __init omap1_late_clk_reset(void) +static void __init omap1_clk_disable_unused(struct clk *clk) { - /* Turn off all unused clocks */ - struct clk *p; __u32 regval32; - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(regval32, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); - - list_for_each_entry(p, &clocks, node) { - if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || - p->enable_reg == 0) - continue; - - /* Clocks in the DSP domain need api_ck. Just assume bootloader - * has not enabled any DSP clocks */ - if ((u32)p->enable_reg == DSP_IDLECT2) { - printk(KERN_INFO "Skipping reset check for DSP domain " - "clock \"%s\"\n", p->name); - continue; - } + /* Clocks in the DSP domain need api_ck. Just assume bootloader + * has not enabled any DSP clocks */ + if ((u32)clk->enable_reg == DSP_IDLECT2) { + printk(KERN_INFO "Skipping reset check for DSP domain " + "clock \"%s\"\n", clk->name); + return; + } - /* Is the clock already disabled? */ - if (p->flags & ENABLE_REG_32BIT) { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(p->enable_reg); - else - regval32 = omap_readl(p->enable_reg); - } else { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(p->enable_reg); + /* Is the clock already disabled? */ + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(clk->enable_reg); else - regval32 = omap_readw(p->enable_reg); - } - - if ((regval32 & (1 << p->enable_bit)) == 0) - continue; + regval32 = omap_readl(clk->enable_reg); + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(clk->enable_reg); + else + regval32 = omap_readw(clk->enable_reg); + } - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || p == &ck_dpll1out.clk // FIX: SoSSI, SSR - || p == &arm_gpio_ck // FIX: GPIO code for 1510 - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - p->name); - continue; - } + if ((regval32 & (1 << clk->enable_bit)) == 0) + return; - printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); - p->disable(p); - printk(" done\n"); + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR + || clk == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + clk->name); + return; } - return 0; + printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); + clk->disable(clk); + printk(" done\n"); } -late_initcall(omap1_late_clk_reset); #else -#define omap1_early_clk_reset() {} +#define omap1_clk_disable_unused NULL #endif static struct clk_functions omap1_clk_functions = { @@ -658,6 +641,7 @@ static struct clk_functions omap1_clk_functions = { .clk_disable = omap1_clk_disable, .clk_round_rate = omap1_clk_round_rate, .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, }; int __init omap1_clk_init(void) @@ -665,8 +649,13 @@ int __init omap1_clk_init(void) struct clk ** clkp; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ + u32 reg; + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); - omap1_early_clk_reset(); clk_init(&omap1_clk_functions); /* By default all idlect1 clocks are allowed to idle */ @@ -687,6 +676,11 @@ int __init omap1_clk_init(void) clk_register(*clkp); continue; } + + if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) { + clk_register(*clkp); + continue; + } } info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); @@ -743,7 +737,7 @@ int __init omap1_clk_init(void) printk(KERN_ERR "System frequencies not set. Check your config.\n"); /* Guess sane values (60MHz) */ omap_writew(0x2290, DPLL_CTL); - omap_writew(0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; propagate_rate(&ck_dpll1); } @@ -756,13 +750,23 @@ int __init omap1_clk_init(void) ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); -#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); #endif + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + /* (on 730, bit 13 must not be cleared) */ + if (cpu_is_omap730()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); /* Put DSP/MPUI into reset until needed */ omap_writew(0, ARM_RSTCT1); @@ -784,7 +788,7 @@ int __init omap1_clk_init(void) clk_enable(&armxor_ck.clk); clk_enable(&armtim_ck.clk); /* This should be done by timer code */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) clk_enable(&arm_gpio_ck); return 0;