X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Farm%2Fvfp%2Fvfphw.S;h=d4b7b229631d5b3fe9db079a3aed284f656beadf;hb=refs%2Fheads%2Fvserver;hp=e51e6679c402b39b461e16a2a0de65ca3326e789;hpb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;p=linux-2.6.git

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index e51e6679c..d4b7b2296 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -65,6 +65,7 @@
 @  r2  = faulted PC+4
 @  r9  = successful return
 @  r10 = vfp_state union
+@  r11 = CPU number
 @  lr  = failure return
 
 	.globl	vfp_support_entry
@@ -79,7 +80,7 @@ vfp_support_entry:
 	DBGSTR1 "enable %x", r10
 	ldr	r3, last_VFP_context_address
 	orr	r1, r1, #FPEXC_ENABLE	@ user FPEXC has the enable bit set
-	ldr	r4, [r3]		@ last_VFP_context pointer
+	ldr	r4, [r3, r11, lsl #2]	@ last_VFP_context pointer
 	bic	r5, r1, #FPEXC_EXCEPTION @ make sure exceptions are disabled
 	cmp	r4, r10
 	beq	check_for_exception	@ we are returning to the same
@@ -91,7 +92,9 @@ vfp_support_entry:
 					@ exceptions, so we can get at the
 					@ rest of it
 
+#ifndef CONFIG_SMP
 	@ Save out the current registers to the old thread state
+	@ No need for SMP since this is not done lazily
 
 	DBGSTR1	"save old state %p", r4
 	cmp	r4, #0
@@ -105,10 +108,11 @@ vfp_support_entry:
 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
 					@ and point r4 at the word at the
 					@ start of the register dump
+#endif
 
 no_old_VFP_process:
 	DBGSTR1	"load state %p", r10
-	str	r10, [r3]		@ update the last_VFP_context pointer
+	str	r10, [r3, r11, lsl #2]	@ update the last_VFP_context pointer
 					@ Load the saved state back into the VFP
 	VFPFLDMIA r10	 		@ reload the working registers while
 					@ FPEXC is in a safe state
@@ -162,6 +166,24 @@ process_exception:
 					@ required. If not, the user code will
 					@ retry the faulted instruction
 
+#ifdef CONFIG_SMP
+	.globl	vfp_save_state
+	.type	vfp_save_state, %function
+vfp_save_state:
+	@ Save the current VFP state
+	@ r0 - save location
+	@ r1 - FPEXC
+	DBGSTR1	"save VFP state %p", r0
+	VFPFMRX	r2, FPSCR		@ current status
+	VFPFMRX	r3, FPINST		@ FPINST (always there, rev0 onwards)
+	tst	r1, #FPEXC_FPV2		@ is there an FPINST2 to read?
+	VFPFMRX	r12, FPINST2, NE	@ FPINST2 if needed - avoids reading
+					@ nonexistant reg on rev0
+	VFPFSTMIA r0 			@ save the working registers
+	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
+	mov	pc, lr
+#endif
+
 last_VFP_context_address:
 	.word	last_VFP_context