X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fi386%2Fkernel%2Fio_apic-xen.c;fp=arch%2Fi386%2Fkernel%2Fio_apic-xen.c;h=49e3ff89bde608cbf4a67ce188ddef342b367f3d;hb=1db395853d4f30d6120458bd279ede1f882a8525;hp=0000000000000000000000000000000000000000;hpb=34a75f0025b9cf803b6a88db032e6ad6950c9313;p=linux-2.6.git diff --git a/arch/i386/kernel/io_apic-xen.c b/arch/i386/kernel/io_apic-xen.c new file mode 100644 index 000000000..49e3ff89b --- /dev/null +++ b/arch/i386/kernel/io_apic-xen.c @@ -0,0 +1,2751 @@ +/* + * Intel IO-APIC support for multi-Pentium hosts. + * + * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo + * + * Many thanks to Stig Venaas for trying out countless experimental + * patches and reporting/debugging problems patiently! + * + * (c) 1999, Multiple IO-APIC support, developed by + * Ken-ichi Yaku and + * Hidemi Kishimoto , + * further tested and cleaned up by Zach Brown + * and Ingo Molnar + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively + * Paul Diefenbaugh : Added full ACPI support + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#include "io_ports.h" + +#ifdef CONFIG_XEN + +#include +#include + +/* Fake i8259 */ +#define make_8259A_irq(_irq) (io_apic_irqs &= ~(1UL<<(_irq))) +#define disable_8259A_irq(_irq) ((void)0) +#define i8259A_irq_pending(_irq) (0) + +unsigned long io_apic_irqs; + +static inline unsigned int xen_io_apic_read(unsigned int apic, unsigned int reg) +{ + struct physdev_apic apic_op; + int ret; + + apic_op.apic_physbase = mp_ioapics[apic].mpc_apicaddr; + apic_op.reg = reg; + ret = HYPERVISOR_physdev_op(PHYSDEVOP_apic_read, &apic_op); + if (ret) + return ret; + return apic_op.value; +} + +static inline void xen_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct physdev_apic apic_op; + + apic_op.apic_physbase = mp_ioapics[apic].mpc_apicaddr; + apic_op.reg = reg; + apic_op.value = value; + HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op); +} + +#define io_apic_read(a,r) xen_io_apic_read(a,r) +#define io_apic_write(a,r,v) xen_io_apic_write(a,r,v) + +#endif /* CONFIG_XEN */ + +int (*ioapic_renumber_irq)(int ioapic, int irq); +atomic_t irq_mis_count; + +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + +static DEFINE_SPINLOCK(ioapic_lock); + +int timer_over_8254 __initdata = 1; + +/* + * Is the SiS APIC rmw bug present ? + * -1 = don't know, 0 = no, 1 = yes + */ +int sis_apic_bug = -1; + +/* + * # of IRQ routing registers + */ +int nr_ioapic_registers[MAX_IO_APICS]; + +int disable_timer_pin_1 __initdata; + +/* + * Rough estimation of how many shared IRQs there are, can + * be changed anytime. + */ +#define MAX_PLUS_SHARED_IRQS NR_IRQS +#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) + +/* + * This is performance-critical, we want to do it O(1) + * + * the indexing order of this array favors 1:1 mappings + * between pins and IRQs. + */ + +static struct irq_pin_list { + int apic, pin, next; +} irq_2_pin[PIN_MAP_SIZE]; + +int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; +#ifdef CONFIG_PCI_MSI +#define vector_to_irq(vector) \ + (platform_legacy_irq(vector) ? vector : vector_irq[vector]) +#else +#define vector_to_irq(vector) (vector) +#endif + +/* + * The common case is 1:1 IRQ<->pin mappings. Sometimes there are + * shared ISA-space IRQs, so we have to support them. We are super + * fast in the common case, and fast for shared ISA-space IRQs. + */ +static void add_pin_to_irq(unsigned int irq, int apic, int pin) +{ + static int first_free_entry = NR_IRQS; + struct irq_pin_list *entry = irq_2_pin + irq; + + while (entry->next) + entry = irq_2_pin + entry->next; + + if (entry->pin != -1) { + entry->next = first_free_entry; + entry = irq_2_pin + entry->next; + if (++first_free_entry >= PIN_MAP_SIZE) + panic("io_apic.c: whoops"); + } + entry->apic = apic; + entry->pin = pin; +} + +#ifdef CONFIG_XEN +#define clear_IO_APIC() ((void)0) +#else +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq(unsigned int irq, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + + while (1) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + } + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + +static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + unsigned int pin, reg; + + for (;;) { + pin = entry->pin; + if (pin == -1) + break; + reg = io_apic_read(entry->apic, 0x10 + pin*2); + reg &= ~disable; + reg |= enable; + io_apic_modify(entry->apic, 0x10 + pin*2, reg); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + +/* mask = 1 */ +static void __mask_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0x00010000, 0); +} + +/* mask = 0 */ +static void __unmask_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0, 0x00010000); +} + +/* mask = 1, trigger = 0 */ +static void __mask_and_edge_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); +} + +/* mask = 0, trigger = 1 */ +static void __unmask_and_level_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); +} + +static void mask_IO_APIC_irq (unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + __mask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void unmask_IO_APIC_irq (unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + __unmask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) +{ + struct IO_APIC_route_entry entry; + unsigned long flags; + + /* Check delivery_mode to be sure we're not clearing an SMI pin */ + spin_lock_irqsave(&ioapic_lock, flags); + *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); + *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + if (entry.delivery_mode == dest_SMI) + return; + + /* + * Disable it in the IO-APIC irq-routing table: + */ + memset(&entry, 0, sizeof(entry)); + entry.mask = 1; + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0)); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1)); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void clear_IO_APIC (void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + clear_IO_APIC_pin(apic, pin); +} + +#ifdef CONFIG_SMP +static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) +{ + unsigned long flags; + int pin; + struct irq_pin_list *entry = irq_2_pin + irq; + unsigned int apicid_value; + cpumask_t tmp; + + cpus_and(tmp, cpumask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(cpumask, tmp, CPU_MASK_ALL); + + apicid_value = cpu_mask_to_apicid(cpumask); + /* Prepare to do the io_apic_write */ + apicid_value = apicid_value << 24; + spin_lock_irqsave(&ioapic_lock, flags); + for (;;) { + pin = entry->pin; + if (pin == -1) + break; + io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } + set_irq_info(irq, cpumask); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +#if defined(CONFIG_IRQBALANCE) +# include /* kernel_thread() */ +# include /* kstat */ +# include /* kmalloc() */ +# include /* time_after() */ + +# ifdef CONFIG_BALANCED_IRQ_DEBUG +# define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0) +# define Dprintk(x...) do { TDprintk(x); } while (0) +# else +# define TDprintk(x...) +# define Dprintk(x...) +# endif + + +#define IRQBALANCE_CHECK_ARCH -999 +static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH; +static int physical_balance = 0; + +static struct irq_cpu_info { + unsigned long * last_irq; + unsigned long * irq_delta; + unsigned long irq; +} irq_cpu_data[NR_CPUS]; + +#define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) +#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) +#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) + +#define IDLE_ENOUGH(cpu,now) \ + (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) + +#define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask) + +#define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i])) + +#define MAX_BALANCED_IRQ_INTERVAL (5*HZ) +#define MIN_BALANCED_IRQ_INTERVAL (HZ/2) +#define BALANCED_IRQ_MORE_DELTA (HZ/10) +#define BALANCED_IRQ_LESS_DELTA (HZ) + +static long balanced_irq_interval = MAX_BALANCED_IRQ_INTERVAL; + +static unsigned long move(int curr_cpu, cpumask_t allowed_mask, + unsigned long now, int direction) +{ + int search_idle = 1; + int cpu = curr_cpu; + + goto inside; + + do { + if (unlikely(cpu == curr_cpu)) + search_idle = 0; +inside: + if (direction == 1) { + cpu++; + if (cpu >= NR_CPUS) + cpu = 0; + } else { + cpu--; + if (cpu == -1) + cpu = NR_CPUS-1; + } + } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || + (search_idle && !IDLE_ENOUGH(cpu,now))); + + return cpu; +} + +static inline void balance_irq(int cpu, int irq) +{ + unsigned long now = jiffies; + cpumask_t allowed_mask; + unsigned int new_cpu; + + if (irqbalance_disabled) + return; + + cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]); + new_cpu = move(cpu, allowed_mask, now, 1); + if (cpu != new_cpu) { + set_pending_irq(irq, cpumask_of_cpu(new_cpu)); + } +} + +static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) +{ + int i, j; + Dprintk("Rotating IRQs among CPUs.\n"); + for_each_online_cpu(i) { + for (j = 0; j < NR_IRQS; j++) { + if (!irq_desc[j].action) + continue; + /* Is it a significant load ? */ + if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < + useful_load_threshold) + continue; + balance_irq(i, j); + } + } + balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + return; +} + +static void do_irq_balance(void) +{ + int i, j; + unsigned long max_cpu_irq = 0, min_cpu_irq = (~0); + unsigned long move_this_load = 0; + int max_loaded = 0, min_loaded = 0; + int load; + unsigned long useful_load_threshold = balanced_irq_interval + 10; + int selected_irq; + int tmp_loaded, first_attempt = 1; + unsigned long tmp_cpu_irq; + unsigned long imbalance = 0; + cpumask_t allowed_mask, target_cpu_mask, tmp; + + for_each_possible_cpu(i) { + int package_index; + CPU_IRQ(i) = 0; + if (!cpu_online(i)) + continue; + package_index = CPU_TO_PACKAGEINDEX(i); + for (j = 0; j < NR_IRQS; j++) { + unsigned long value_now, delta; + /* Is this an active IRQ? */ + if (!irq_desc[j].action) + continue; + if ( package_index == i ) + IRQ_DELTA(package_index,j) = 0; + /* Determine the total count per processor per IRQ */ + value_now = (unsigned long) kstat_cpu(i).irqs[j]; + + /* Determine the activity per processor per IRQ */ + delta = value_now - LAST_CPU_IRQ(i,j); + + /* Update last_cpu_irq[][] for the next time */ + LAST_CPU_IRQ(i,j) = value_now; + + /* Ignore IRQs whose rate is less than the clock */ + if (delta < useful_load_threshold) + continue; + /* update the load for the processor or package total */ + IRQ_DELTA(package_index,j) += delta; + + /* Keep track of the higher numbered sibling as well */ + if (i != package_index) + CPU_IRQ(i) += delta; + /* + * We have sibling A and sibling B in the package + * + * cpu_irq[A] = load for cpu A + load for cpu B + * cpu_irq[B] = load for cpu B + */ + CPU_IRQ(package_index) += delta; + } + } + /* Find the least loaded processor package */ + for_each_online_cpu(i) { + if (i != CPU_TO_PACKAGEINDEX(i)) + continue; + if (min_cpu_irq > CPU_IRQ(i)) { + min_cpu_irq = CPU_IRQ(i); + min_loaded = i; + } + } + max_cpu_irq = ULONG_MAX; + +tryanothercpu: + /* Look for heaviest loaded processor. + * We may come back to get the next heaviest loaded processor. + * Skip processors with trivial loads. + */ + tmp_cpu_irq = 0; + tmp_loaded = -1; + for_each_online_cpu(i) { + if (i != CPU_TO_PACKAGEINDEX(i)) + continue; + if (max_cpu_irq <= CPU_IRQ(i)) + continue; + if (tmp_cpu_irq < CPU_IRQ(i)) { + tmp_cpu_irq = CPU_IRQ(i); + tmp_loaded = i; + } + } + + if (tmp_loaded == -1) { + /* In the case of small number of heavy interrupt sources, + * loading some of the cpus too much. We use Ingo's original + * approach to rotate them around. + */ + if (!first_attempt && imbalance >= useful_load_threshold) { + rotate_irqs_among_cpus(useful_load_threshold); + return; + } + goto not_worth_the_effort; + } + + first_attempt = 0; /* heaviest search */ + max_cpu_irq = tmp_cpu_irq; /* load */ + max_loaded = tmp_loaded; /* processor */ + imbalance = (max_cpu_irq - min_cpu_irq) / 2; + + Dprintk("max_loaded cpu = %d\n", max_loaded); + Dprintk("min_loaded cpu = %d\n", min_loaded); + Dprintk("max_cpu_irq load = %ld\n", max_cpu_irq); + Dprintk("min_cpu_irq load = %ld\n", min_cpu_irq); + Dprintk("load imbalance = %lu\n", imbalance); + + /* if imbalance is less than approx 10% of max load, then + * observe diminishing returns action. - quit + */ + if (imbalance < (max_cpu_irq >> 3)) { + Dprintk("Imbalance too trivial\n"); + goto not_worth_the_effort; + } + +tryanotherirq: + /* if we select an IRQ to move that can't go where we want, then + * see if there is another one to try. + */ + move_this_load = 0; + selected_irq = -1; + for (j = 0; j < NR_IRQS; j++) { + /* Is this an active IRQ? */ + if (!irq_desc[j].action) + continue; + if (imbalance <= IRQ_DELTA(max_loaded,j)) + continue; + /* Try to find the IRQ that is closest to the imbalance + * without going over. + */ + if (move_this_load < IRQ_DELTA(max_loaded,j)) { + move_this_load = IRQ_DELTA(max_loaded,j); + selected_irq = j; + } + } + if (selected_irq == -1) { + goto tryanothercpu; + } + + imbalance = move_this_load; + + /* For physical_balance case, we accumlated both load + * values in the one of the siblings cpu_irq[], + * to use the same code for physical and logical processors + * as much as possible. + * + * NOTE: the cpu_irq[] array holds the sum of the load for + * sibling A and sibling B in the slot for the lowest numbered + * sibling (A), _AND_ the load for sibling B in the slot for + * the higher numbered sibling. + * + * We seek the least loaded sibling by making the comparison + * (A+B)/2 vs B + */ + load = CPU_IRQ(min_loaded) >> 1; + for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) { + if (load > CPU_IRQ(j)) { + /* This won't change cpu_sibling_map[min_loaded] */ + load = CPU_IRQ(j); + min_loaded = j; + } + } + + cpus_and(allowed_mask, cpu_online_map, irq_affinity[selected_irq]); + target_cpu_mask = cpumask_of_cpu(min_loaded); + cpus_and(tmp, target_cpu_mask, allowed_mask); + + if (!cpus_empty(tmp)) { + + Dprintk("irq = %d moved to cpu = %d\n", + selected_irq, min_loaded); + /* mark for change destination */ + set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); + + /* Since we made a change, come back sooner to + * check for more variation. + */ + balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + return; + } + goto tryanotherirq; + +not_worth_the_effort: + /* + * if we did not find an IRQ to move, then adjust the time interval + * upward + */ + balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, + balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); + Dprintk("IRQ worth rotating not found\n"); + return; +} + +static int balanced_irq(void *unused) +{ + int i; + unsigned long prev_balance_time = jiffies; + long time_remaining = balanced_irq_interval; + + daemonize("kirqd"); + + /* push everything to CPU 0 to give us a starting point. */ + for (i = 0 ; i < NR_IRQS ; i++) { + pending_irq_cpumask[i] = cpumask_of_cpu(0); + set_pending_irq(i, cpumask_of_cpu(0)); + } + + for ( ; ; ) { + time_remaining = schedule_timeout_interruptible(time_remaining); + try_to_freeze(); + if (time_after(jiffies, + prev_balance_time+balanced_irq_interval)) { + preempt_disable(); + do_irq_balance(); + prev_balance_time = jiffies; + time_remaining = balanced_irq_interval; + preempt_enable(); + } + } + return 0; +} + +static int __init balanced_irq_init(void) +{ + int i; + struct cpuinfo_x86 *c; + cpumask_t tmp; + + cpus_shift_right(tmp, cpu_online_map, 2); + c = &boot_cpu_data; + /* When not overwritten by the command line ask subarchitecture. */ + if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) + irqbalance_disabled = NO_BALANCE_IRQ; + if (irqbalance_disabled) + return 0; + + /* disable irqbalance completely if there is only one processor online */ + if (num_online_cpus() < 2) { + irqbalance_disabled = 1; + return 0; + } + /* + * Enable physical balance only if more than 1 physical processor + * is present + */ + if (smp_num_siblings > 1 && !cpus_empty(tmp)) + physical_balance = 1; + + for_each_online_cpu(i) { + irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { + printk(KERN_ERR "balanced_irq_init: out of memory"); + goto failed; + } + memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); + memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); + } + + printk(KERN_INFO "Starting balanced_irq\n"); + if (kernel_thread(balanced_irq, NULL, CLONE_KERNEL) >= 0) + return 0; + else + printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); +failed: + for_each_possible_cpu(i) { + kfree(irq_cpu_data[i].irq_delta); + irq_cpu_data[i].irq_delta = NULL; + kfree(irq_cpu_data[i].last_irq); + irq_cpu_data[i].last_irq = NULL; + } + return 0; +} + +int __init irqbalance_disable(char *str) +{ + irqbalance_disabled = 1; + return 1; +} + +__setup("noirqbalance", irqbalance_disable); + +late_initcall(balanced_irq_init); +#endif /* CONFIG_IRQBALANCE */ +#endif /* CONFIG_SMP */ +#endif + +#ifndef CONFIG_SMP +void fastcall send_IPI_self(int vector) +{ +#ifndef CONFIG_XEN + unsigned int cfg; + + /* + * Wait for idle. + */ + apic_wait_icr_idle(); + cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL; + /* + * Send the IPI. The write to APIC_ICR fires this off. + */ + apic_write_around(APIC_ICR, cfg); +#endif +} +#endif /* !CONFIG_SMP */ + + +/* + * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to + * specific CPU-side IRQs. + */ + +#define MAX_PIRQS 8 +static int pirq_entries [MAX_PIRQS]; +static int pirqs_enabled; +int skip_ioapic_setup; + +static int __init ioapic_setup(char *str) +{ + skip_ioapic_setup = 1; + return 1; +} + +__setup("noapic", ioapic_setup); + +static int __init ioapic_pirq_setup(char *str) +{ + int i, max; + int ints[MAX_PIRQS+1]; + + get_options(str, ARRAY_SIZE(ints), ints); + + for (i = 0; i < MAX_PIRQS; i++) + pirq_entries[i] = -1; + + pirqs_enabled = 1; + apic_printk(APIC_VERBOSE, KERN_INFO + "PIRQ redirection, working around broken MP-BIOS.\n"); + max = MAX_PIRQS; + if (ints[0] < MAX_PIRQS) + max = ints[0]; + + for (i = 0; i < max; i++) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); + /* + * PIRQs are mapped upside down, usually. + */ + pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; + } + return 1; +} + +__setup("pirq=", ioapic_pirq_setup); + +/* + * Find the IRQ entry number of a certain pin. + */ +static int find_irq_entry(int apic, int pin, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].mpc_irqtype == type && + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && + mp_irqs[i].mpc_dstirq == pin) + return i; + + return -1; +} + +/* + * Find the pin to which IRQ[irq] (ISA) is connected + */ +static int __init find_isa_irq_pin(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || + mp_bus_id_to_type[lbus] == MP_BUS_EISA || + mp_bus_id_to_type[lbus] == MP_BUS_MCA || + mp_bus_id_to_type[lbus] == MP_BUS_NEC98 + ) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + + return mp_irqs[i].mpc_dstirq; + } + return -1; +} + +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || + mp_bus_id_to_type[lbus] == MP_BUS_EISA || + mp_bus_id_to_type[lbus] == MP_BUS_MCA || + mp_bus_id_to_type[lbus] == MP_BUS_NEC98 + ) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + break; + } + if (i < mp_irq_entries) { + int apic; + for(apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + return apic; + } + } + + return -1; +} + +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +static int pin_2_irq(int idx, int apic, int pin); + +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) +{ + int apic, i, best_guess = -1; + + apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " + "slot:%d, pin:%d.\n", bus, slot, pin); + if (mp_bus_id_to_pci_bus[bus] == -1) { + printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + for (apic = 0; apic < nr_ioapics; apic++) + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + break; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && + !mp_irqs[i].mpc_irqtype && + (bus == lbus) && + (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + + if (!(apic || IO_APIC_IRQ(irq))) + continue; + + if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + return irq; + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_guess < 0) + best_guess = irq; + } + } + return best_guess; +} +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); + +/* + * This function currently is only a helper for the i386 smp boot process where + * we need to reprogram the ioredtbls to cater for the cpus which have come online + * so mask in all cases should simply be TARGET_CPUS + */ +#ifdef CONFIG_SMP +#ifndef CONFIG_XEN +void __init setup_ioapic_dest(void) +{ + int pin, ioapic, irq, irq_entry; + + if (skip_ioapic_setup == 1) + return; + + for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { + for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + irq = pin_2_irq(irq_entry, ioapic, pin); + set_ioapic_affinity_irq(irq, TARGET_CPUS); + } + + } +} +#endif /* !CONFIG_XEN */ +#endif + +/* + * EISA Edge/Level control register, ELCR + */ +static int EISA_ELCR(unsigned int irq) +{ + if (irq < 16) { + unsigned int port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; + } + apic_printk(APIC_VERBOSE, KERN_INFO + "Broken MPtable reports ISA irq %d\n", irq); + return 0; +} + +/* EISA interrupts are always polarity zero and can be edge or level + * trigger depending on the ELCR value. If an interrupt is listed as + * EISA conforming in the MP table, that means its trigger type must + * be read in from the ELCR */ + +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) +#define default_EISA_polarity(idx) (0) + +/* ISA interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_ISA_trigger(idx) (0) +#define default_ISA_polarity(idx) (0) + +/* PCI interrupts are always polarity one level triggered, + * when listed as conforming in the MP table. */ + +#define default_PCI_trigger(idx) (1) +#define default_PCI_polarity(idx) (1) + +/* MCA interrupts are always polarity zero level triggered, + * when listed as conforming in the MP table. */ + +#define default_MCA_trigger(idx) (1) +#define default_MCA_polarity(idx) (0) + +/* NEC98 interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_NEC98_trigger(idx) (0) +#define default_NEC98_polarity(idx) (0) + +static int __init MPBIOS_polarity(int idx) +{ + int bus = mp_irqs[idx].mpc_srcbus; + int polarity; + + /* + * Determine IRQ line polarity (high active or low active): + */ + switch (mp_irqs[idx].mpc_irqflag & 3) + { + case 0: /* conforms, ie. bus-type dependent polarity */ + { + switch (mp_bus_id_to_type[bus]) + { + case MP_BUS_ISA: /* ISA pin */ + { + polarity = default_ISA_polarity(idx); + break; + } + case MP_BUS_EISA: /* EISA pin */ + { + polarity = default_EISA_polarity(idx); + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + polarity = default_PCI_polarity(idx); + break; + } + case MP_BUS_MCA: /* MCA pin */ + { + polarity = default_MCA_polarity(idx); + break; + } + case MP_BUS_NEC98: /* NEC 98 pin */ + { + polarity = default_NEC98_polarity(idx); + break; + } + default: + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + } + break; + } + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + } + return polarity; +} + +static int MPBIOS_trigger(int idx) +{ + int bus = mp_irqs[idx].mpc_srcbus; + int trigger; + + /* + * Determine IRQ trigger mode (edge or level sensitive): + */ + switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + { + case 0: /* conforms, ie. bus-type dependent */ + { + switch (mp_bus_id_to_type[bus]) + { + case MP_BUS_ISA: /* ISA pin */ + { + trigger = default_ISA_trigger(idx); + break; + } + case MP_BUS_EISA: /* EISA pin */ + { + trigger = default_EISA_trigger(idx); + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + trigger = default_PCI_trigger(idx); + break; + } + case MP_BUS_MCA: /* MCA pin */ + { + trigger = default_MCA_trigger(idx); + break; + } + case MP_BUS_NEC98: /* NEC 98 pin */ + { + trigger = default_NEC98_trigger(idx); + break; + } + default: + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + } + break; + } + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } + return trigger; +} + +static inline int irq_polarity(int idx) +{ + return MPBIOS_polarity(idx); +} + +static inline int irq_trigger(int idx) +{ + return MPBIOS_trigger(idx); +} + +static int pin_2_irq(int idx, int apic, int pin) +{ + int irq, i; + int bus = mp_irqs[idx].mpc_srcbus; + + /* + * Debugging check, we are in big trouble if this message pops up! + */ + if (mp_irqs[idx].mpc_dstirq != pin) + printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); + + switch (mp_bus_id_to_type[bus]) + { + case MP_BUS_ISA: /* ISA pin */ + case MP_BUS_EISA: + case MP_BUS_MCA: + case MP_BUS_NEC98: + { + irq = mp_irqs[idx].mpc_srcbusirq; + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + /* + * PCI IRQs are mapped in order + */ + i = irq = 0; + while (i < apic) + irq += nr_ioapic_registers[i++]; + irq += pin; + + /* + * For MPS mode, so far only needed by ES7000 platform + */ + if (ioapic_renumber_irq) + irq = ioapic_renumber_irq(apic, irq); + + break; + } + default: + { + printk(KERN_ERR "unknown bus type %d.\n",bus); + irq = 0; + break; + } + } + + /* + * PCI IRQ command line redirection. Yes, limits are hardcoded. + */ + if ((pin >= 16) && (pin <= 23)) { + if (pirq_entries[pin-16] != -1) { + if (!pirq_entries[pin-16]) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "disabling PIRQ%d\n", pin-16); + } else { + irq = pirq_entries[pin-16]; + apic_printk(APIC_VERBOSE, KERN_DEBUG + "using PIRQ%d -> IRQ %d\n", + pin-16, irq); + } + } + } + return irq; +} + +static inline int IO_APIC_irq_trigger(int irq) +{ + int apic, idx, pin; + + for (apic = 0; apic < nr_ioapics; apic++) { + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + idx = find_irq_entry(apic,pin,mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) + return irq_trigger(idx); + } + } + /* + * nonexistent IRQs are edge default + */ + return 0; +} + +/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ +u8 irq_vector[NR_IRQ_VECTORS] __read_mostly; /* = { FIRST_DEVICE_VECTOR , 0 }; */ + +int assign_irq_vector(int irq) +{ + struct physdev_irq irq_op; + + BUG_ON(irq >= NR_IRQ_VECTORS); + if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) + return IO_APIC_VECTOR(irq); + + irq_op.irq = irq; + if (HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op)) + return -ENOSPC; + + vector_irq[irq_op.vector] = irq; + if (irq != AUTO_ASSIGN) + IO_APIC_VECTOR(irq) = irq_op.vector; + + return irq_op.vector; +} + +#ifndef CONFIG_XEN +static struct hw_interrupt_type ioapic_level_type; +static struct hw_interrupt_type ioapic_edge_type; + +#define IOAPIC_AUTO -1 +#define IOAPIC_EDGE 0 +#define IOAPIC_LEVEL 1 + +static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger) +{ + if (use_pci_vector() && !platform_legacy_irq(irq)) { + if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || + trigger == IOAPIC_LEVEL) + irq_desc[vector].handler = &ioapic_level_type; + else + irq_desc[vector].handler = &ioapic_edge_type; + set_intr_gate(vector, interrupt[vector]); + } else { + if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || + trigger == IOAPIC_LEVEL) + irq_desc[irq].handler = &ioapic_level_type; + else + irq_desc[irq].handler = &ioapic_edge_type; + set_intr_gate(vector, interrupt[irq]); + } +} +#else +#define ioapic_register_intr(_irq,_vector,_trigger) ((void)0) +#endif + +static void __init setup_IO_APIC_irqs(void) +{ + struct IO_APIC_route_entry entry; + int apic, pin, idx, irq, first_notcon = 1, vector; + unsigned long flags; + + apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + + for (apic = 0; apic < nr_ioapics; apic++) { + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + + /* + * add it to the IO-APIC irq-routing table: + */ + memset(&entry,0,sizeof(entry)); + + entry.delivery_mode = INT_DELIVERY_MODE; + entry.dest_mode = INT_DEST_MODE; + entry.mask = 0; /* enable IRQ */ + entry.dest.logical.logical_dest = + cpu_mask_to_apicid(TARGET_CPUS); + + idx = find_irq_entry(apic,pin,mp_INT); + if (idx == -1) { + if (first_notcon) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + " IO-APIC (apicid-pin) %d-%d", + mp_ioapics[apic].mpc_apicid, + pin); + first_notcon = 0; + } else + apic_printk(APIC_VERBOSE, ", %d-%d", + mp_ioapics[apic].mpc_apicid, pin); + continue; + } + + entry.trigger = irq_trigger(idx); + entry.polarity = irq_polarity(idx); + + if (irq_trigger(idx)) { + entry.trigger = 1; + entry.mask = 1; + } + + irq = pin_2_irq(idx, apic, pin); + /* + * skip adding the timer int on secondary nodes, which causes + * a small but painful rift in the time-space continuum + */ + if (multi_timer_check(apic, irq)) + continue; + else + add_pin_to_irq(irq, apic, pin); + + if (/*!apic &&*/ !IO_APIC_IRQ(irq)) + continue; + + if (IO_APIC_IRQ(irq)) { + vector = assign_irq_vector(irq); + entry.vector = vector; + ioapic_register_intr(irq, vector, IOAPIC_AUTO); + + if (!apic && (irq < 16)) + disable_8259A_irq(irq); + } + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(irq, TARGET_CPUS); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + } + + if (!first_notcon) + apic_printk(APIC_VERBOSE, " not connected.\n"); +} + +/* + * Set up the 8259A-master output pin: + */ +#ifndef CONFIG_XEN +static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +{ + struct IO_APIC_route_entry entry; + unsigned long flags; + + memset(&entry,0,sizeof(entry)); + + disable_8259A_irq(0); + + /* mask LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + + /* + * We use logical delivery to get the timer IRQ + * to the first CPU. + */ + entry.dest_mode = INT_DEST_MODE; + entry.mask = 0; /* unmask IRQ now */ + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.delivery_mode = INT_DELIVERY_MODE; + entry.polarity = 0; + entry.trigger = 0; + entry.vector = vector; + + /* + * The timer IRQ doesn't have to know that behind the + * scene we have a 8259A-master in AEOI mode ... + */ + irq_desc[0].handler = &ioapic_edge_type; + + /* + * Add it to the IO-APIC irq-routing table: + */ + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + + enable_8259A_irq(0); +} + +static inline void UNEXPECTED_IO_APIC(void) +{ +} + +void __init print_IO_APIC(void) +{ + int apic, i; + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + union IO_APIC_reg_03 reg_03; + unsigned long flags; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + for (i = 0; i < nr_ioapics; i++) + printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", + mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + + /* + * We are a bit conservative about what we expect. We have to + * know about every hardware change ASAP. + */ + printk(KERN_INFO "testing the IO APIC.......................\n"); + + for (apic = 0; apic < nr_ioapics; apic++) { + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + reg_01.raw = io_apic_read(apic, 1); + if (reg_01.bits.version >= 0x10) + reg_02.raw = io_apic_read(apic, 2); + if (reg_01.bits.version >= 0x20) + reg_03.raw = io_apic_read(apic, 3); + spin_unlock_irqrestore(&ioapic_lock, flags); + + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); + printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); + printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); + printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); + if (reg_00.bits.ID >= get_physical_broadcast()) + UNEXPECTED_IO_APIC(); + if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2) + UNEXPECTED_IO_APIC(); + + printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw); + printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); + if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */ + (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */ + (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */ + (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */ + (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */ + (reg_01.bits.entries != 0x2E) && + (reg_01.bits.entries != 0x3F) + ) + UNEXPECTED_IO_APIC(); + + printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); + printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); + if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */ + (reg_01.bits.version != 0x10) && /* oldest IO-APICs */ + (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */ + (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */ + (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */ + ) + UNEXPECTED_IO_APIC(); + if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2) + UNEXPECTED_IO_APIC(); + + /* + * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, + * but the value of reg_02 is read as the previous read register + * value, so ignore it if reg_02 == reg_01. + */ + if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); + printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); + if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2) + UNEXPECTED_IO_APIC(); + } + + /* + * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 + * or reg_03, but the value of reg_0[23] is read as the previous read + * register value, so ignore it if reg_03 == reg_0[12]. + */ + if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && + reg_03.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); + printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); + if (reg_03.bits.__reserved_1) + UNEXPECTED_IO_APIC(); + } + + printk(KERN_DEBUG ".... IRQ redirection table:\n"); + + printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" + " Stat Dest Deli Vect: \n"); + + for (i = 0; i <= reg_01.bits.entries; i++) { + struct IO_APIC_route_entry entry; + + spin_lock_irqsave(&ioapic_lock, flags); + *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2); + *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2); + spin_unlock_irqrestore(&ioapic_lock, flags); + + printk(KERN_DEBUG " %02x %03X %02X ", + i, + entry.dest.logical.logical_dest, + entry.dest.physical.physical_dest + ); + + printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", + entry.mask, + entry.trigger, + entry.irr, + entry.polarity, + entry.delivery_status, + entry.dest_mode, + entry.delivery_mode, + entry.vector + ); + } + } + if (use_pci_vector()) + printk(KERN_INFO "Using vector-based indexing\n"); + printk(KERN_DEBUG "IRQ to pin mappings:\n"); + for (i = 0; i < NR_IRQS; i++) { + struct irq_pin_list *entry = irq_2_pin + i; + if (entry->pin < 0) + continue; + if (use_pci_vector() && !platform_legacy_irq(i)) + printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i)); + else + printk(KERN_DEBUG "IRQ%d ", i); + for (;;) { + printk("-> %d:%d", entry->apic, entry->pin); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } + printk("\n"); + } + + printk(KERN_INFO ".................................... done.\n"); + + return; +} + +#if 0 + +static void print_APIC_bitfield (int base) +{ + unsigned int v; + int i, j; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); + for (i = 0; i < 8; i++) { + v = apic_read(base + i*0x10); + for (j = 0; j < 32; j++) { + if (v & (1< 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + v = apic_read(APIC_ESR); + printk(KERN_DEBUG "... APIC ESR: %08x\n", v); + } + + v = apic_read(APIC_ICR); + printk(KERN_DEBUG "... APIC ICR: %08x\n", v); + v = apic_read(APIC_ICR2); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + + v = apic_read(APIC_LVTT); + printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); + + if (maxlvt > 3) { /* PC is LVT#4. */ + v = apic_read(APIC_LVTPC); + printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); + } + v = apic_read(APIC_LVT0); + printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); + v = apic_read(APIC_LVT1); + printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); + + if (maxlvt > 2) { /* ERR is LVT#3. */ + v = apic_read(APIC_LVTERR); + printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); + } + + v = apic_read(APIC_TMICT); + printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); + v = apic_read(APIC_TMCCT); + printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); + v = apic_read(APIC_TDCR); + printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); + printk("\n"); +} + +void print_all_local_APICs (void) +{ + on_each_cpu(print_local_APIC, NULL, 1, 1); +} + +void /*__init*/ print_PIC(void) +{ + unsigned int v; + unsigned long flags; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "\nprinting PIC contents\n"); + + spin_lock_irqsave(&i8259A_lock, flags); + + v = inb(0xa1) << 8 | inb(0x21); + printk(KERN_DEBUG "... PIC IMR: %04x\n", v); + + v = inb(0xa0) << 8 | inb(0x20); + printk(KERN_DEBUG "... PIC IRR: %04x\n", v); + + outb(0x0b,0xa0); + outb(0x0b,0x20); + v = inb(0xa0) << 8 | inb(0x20); + outb(0x0a,0xa0); + outb(0x0a,0x20); + + spin_unlock_irqrestore(&i8259A_lock, flags); + + printk(KERN_DEBUG "... PIC ISR: %04x\n", v); + + v = inb(0x4d1) << 8 | inb(0x4d0); + printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); +} + +#endif /* 0 */ + +#else +void __init print_IO_APIC(void) { } +#endif /* !CONFIG_XEN */ + +static void __init enable_IO_APIC(void) +{ + union IO_APIC_reg_01 reg_01; + int i8259_apic, i8259_pin; + int i, apic; + unsigned long flags; + + for (i = 0; i < PIN_MAP_SIZE; i++) { + irq_2_pin[i].pin = -1; + irq_2_pin[i].next = 0; + } + if (!pirqs_enabled) + for (i = 0; i < MAX_PIRQS; i++) + pirq_entries[i] = -1; + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + for(apic = 0; apic < nr_ioapics; apic++) { + int pin; + /* See if any of the pins is in ExtINT mode */ + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + spin_lock_irqsave(&ioapic_lock, flags); + *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); + *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + /* If we could not find the appropriate pin by looking at the ioapic + * the i8259 probably is not connected the ioapic but give the + * mptable a chance anyway. + */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); + } + + /* + * Do not trust the IO-APIC being empty at bootup + */ + clear_IO_APIC(); +} + +/* + * Not an __init, needed by the reboot code + */ +void disable_IO_APIC(void) +{ + /* + * Clear the IO-APIC before rebooting: + */ + clear_IO_APIC(); + +#ifndef CONFIG_XEN + /* + * If the i8259 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrupts can be delivered. + */ + if (ioapic_i8259.pin != -1) { + struct IO_APIC_route_entry entry; + unsigned long flags; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = dest_ExtINT; /* ExtInt */ + entry.vector = 0; + entry.dest.physical.physical_dest = + GET_APIC_ID(apic_read(APIC_ID)); + + /* + * Add it to the IO-APIC irq-routing table: + */ + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin, + *(((int *)&entry)+1)); + io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin, + *(((int *)&entry)+0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + disconnect_bsp_APIC(ioapic_i8259.pin != -1); +#endif +} + +/* + * function to set the IO-APIC physical IDs based on the + * values stored in the MPC table. + * + * by Matt Domsch Tue Dec 21 12:25:05 CST 1999 + */ + +#if !defined(CONFIG_XEN) && !defined(CONFIG_X86_NUMAQ) +static void __init setup_ioapic_ids_from_mpc(void) +{ + union IO_APIC_reg_00 reg_00; + physid_mask_t phys_id_present_map; + int apic; + int i; + unsigned char old_id; + unsigned long flags; + + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return; + /* + * This is broken; anything with a real cpu count has to + * circumvent this idiocy regardless. + */ + phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map); + + /* + * Set the IOAPIC ID to the value stored in the MPC table. + */ + for (apic = 0; apic < nr_ioapics; apic++) { + + /* Read the register 0 value */ + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + old_id = mp_ioapics[apic].mpc_apicid; + + if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", + apic, mp_ioapics[apic].mpc_apicid); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + reg_00.bits.ID); + mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; + } + + /* + * Sanity check, is the ID really free? Every APIC in a + * system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (check_apicid_used(phys_id_present_map, + mp_ioapics[apic].mpc_apicid)) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", + apic, mp_ioapics[apic].mpc_apicid); + for (i = 0; i < get_physical_broadcast(); i++) + if (!physid_isset(i, phys_id_present_map)) + break; + if (i >= get_physical_broadcast()) + panic("Max APIC ID exceeded!\n"); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + i); + physid_set(i, phys_id_present_map); + mp_ioapics[apic].mpc_apicid = i; + } else { + physid_mask_t tmp; + tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); + apic_printk(APIC_VERBOSE, "Setting %d in the " + "phys_id_present_map\n", + mp_ioapics[apic].mpc_apicid); + physids_or(phys_id_present_map, phys_id_present_map, tmp); + } + + + /* + * We need to adjust the IRQ routing table + * if the ID changed. + */ + if (old_id != mp_ioapics[apic].mpc_apicid) + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].mpc_dstapic == old_id) + mp_irqs[i].mpc_dstapic + = mp_ioapics[apic].mpc_apicid; + + /* + * Read the right value from the MPC table and + * write it into the ID register. + */ + apic_printk(APIC_VERBOSE, KERN_INFO + "...changing IO-APIC physical APIC ID to %d ...", + mp_ioapics[apic].mpc_apicid); + + reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0, reg_00.raw); + spin_unlock_irqrestore(&ioapic_lock, flags); + + /* + * Sanity check + */ + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) + printk("could not set ID!\n"); + else + apic_printk(APIC_VERBOSE, " ok.\n"); + } +} +#else +static void __init setup_ioapic_ids_from_mpc(void) { } +#endif + +#ifndef CONFIG_XEN +/* + * There is a nasty bug in some older SMP boards, their mptable lies + * about the timer IRQ. We do the following to work around the situation: + * + * - timer IRQ defaults to IO-APIC IRQ + * - if this function detects that timer IRQs are defunct, then we fall + * back to ISA timer IRQs + */ +static int __init timer_irq_works(void) +{ + unsigned long t1 = jiffies; + + local_irq_enable(); + /* Let ten ticks pass... */ + mdelay((10 * 1000) / HZ); + + /* + * Expect a few ticks at least, to be sure some possible + * glue logic does not lock up after one or two first + * ticks in a non-ExtINT mode. Also the local APIC + * might have cached one ExtINT interrupt. Finally, at + * least one tick may be lost due to delays. + */ + if (jiffies - t1 > 4) + return 1; + + return 0; +} + +/* + * In the SMP+IOAPIC case it might happen that there are an unspecified + * number of pending IRQ events unhandled. These cases are very rare, + * so we 'resend' these IRQs via IPIs, to the same CPU. It's much + * better to do it this way as thus we do not have to be aware of + * 'pending' interrupts in the IRQ path, except at this point. + */ +/* + * Edge triggered needs to resend any interrupt + * that was delayed but this is now handled in the device + * independent code. + */ + +/* + * Starting up a edge-triggered IO-APIC interrupt is + * nasty - we need to make sure that we get the edge. + * If it is already asserted for some reason, we need + * return 1 to indicate that is was pending. + * + * This is not complete - we should be able to fake + * an edge even if it isn't on the 8259A... + */ +static unsigned int startup_edge_ioapic_irq(unsigned int irq) +{ + int was_pending = 0; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + if (irq < 16) { + disable_8259A_irq(irq); + if (i8259A_irq_pending(irq)) + was_pending = 1; + } + __unmask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return was_pending; +} + +/* + * Once we have recorded IRQ_PENDING already, we can mask the + * interrupt for real. This prevents IRQ storms from unhandled + * devices. + */ +static void ack_edge_ioapic_irq(unsigned int irq) +{ + move_irq(irq); + if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED)) + == (IRQ_PENDING | IRQ_DISABLED)) + mask_IO_APIC_irq(irq); + ack_APIC_irq(); +} + +/* + * Level triggered interrupts can just be masked, + * and shutting down and starting up the interrupt + * is the same as enabling and disabling them -- except + * with a startup need to return a "was pending" value. + * + * Level triggered interrupts are special because we + * do not touch any IO-APIC register while handling + * them. We ack the APIC in the end-IRQ handler, not + * in the start-IRQ-handler. Protection against reentrance + * from the same interrupt is still provided, both by the + * generic IRQ layer and by the fact that an unacked local + * APIC does not accept IRQs. + */ +static unsigned int startup_level_ioapic_irq (unsigned int irq) +{ + unmask_IO_APIC_irq(irq); + + return 0; /* don't check for pending */ +} + +static void end_level_ioapic_irq (unsigned int irq) +{ + unsigned long v; + int i; + + move_irq(irq); +/* + * It appears there is an erratum which affects at least version 0x11 + * of I/O APIC (that's the 82093AA and cores integrated into various + * chipsets). Under certain conditions a level-triggered interrupt is + * erroneously delivered as edge-triggered one but the respective IRR + * bit gets set nevertheless. As a result the I/O unit expects an EOI + * message but it will never arrive and further interrupts are blocked + * from the source. The exact reason is so far unknown, but the + * phenomenon was observed when two consecutive interrupt requests + * from a given source get delivered to the same CPU and the source is + * temporarily disabled in between. + * + * A workaround is to simulate an EOI message manually. We achieve it + * by setting the trigger mode to edge and then to level when the edge + * trigger mode gets detected in the TMR of a local APIC for a + * level-triggered interrupt. We mask the source for the time of the + * operation to prevent an edge-triggered interrupt escaping meanwhile. + * The idea is from Manfred Spraul. --macro + */ + i = IO_APIC_VECTOR(irq); + + v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); + + ack_APIC_irq(); + + if (!(v & (1 << (i & 0x1f)))) { + atomic_inc(&irq_mis_count); + spin_lock(&ioapic_lock); + __mask_and_edge_IO_APIC_irq(irq); + __unmask_and_level_IO_APIC_irq(irq); + spin_unlock(&ioapic_lock); + } +} + +#ifdef CONFIG_PCI_MSI +static unsigned int startup_edge_ioapic_vector(unsigned int vector) +{ + int irq = vector_to_irq(vector); + + return startup_edge_ioapic_irq(irq); +} + +static void ack_edge_ioapic_vector(unsigned int vector) +{ + int irq = vector_to_irq(vector); + + move_native_irq(vector); + ack_edge_ioapic_irq(irq); +} + +static unsigned int startup_level_ioapic_vector (unsigned int vector) +{ + int irq = vector_to_irq(vector); + + return startup_level_ioapic_irq (irq); +} + +static void end_level_ioapic_vector (unsigned int vector) +{ + int irq = vector_to_irq(vector); + + move_native_irq(vector); + end_level_ioapic_irq(irq); +} + +static void mask_IO_APIC_vector (unsigned int vector) +{ + int irq = vector_to_irq(vector); + + mask_IO_APIC_irq(irq); +} + +static void unmask_IO_APIC_vector (unsigned int vector) +{ + int irq = vector_to_irq(vector); + + unmask_IO_APIC_irq(irq); +} + +#ifdef CONFIG_SMP +static void set_ioapic_affinity_vector (unsigned int vector, + cpumask_t cpu_mask) +{ + int irq = vector_to_irq(vector); + + set_native_irq_info(vector, cpu_mask); + set_ioapic_affinity_irq(irq, cpu_mask); +} +#endif +#endif + +/* + * Level and edge triggered IO-APIC interrupts need different handling, + * so we use two separate IRQ descriptors. Edge triggered IRQs can be + * handled with the level-triggered descriptor, but that one has slightly + * more overhead. Level-triggered interrupts cannot be handled with the + * edge-triggered handler, without risking IRQ storms and other ugly + * races. + */ +static struct hw_interrupt_type ioapic_edge_type __read_mostly = { + .typename = "IO-APIC-edge", + .startup = startup_edge_ioapic, + .shutdown = shutdown_edge_ioapic, + .enable = enable_edge_ioapic, + .disable = disable_edge_ioapic, + .ack = ack_edge_ioapic, + .end = end_edge_ioapic, +#ifdef CONFIG_SMP + .set_affinity = set_ioapic_affinity, +#endif +}; + +static struct hw_interrupt_type ioapic_level_type __read_mostly = { + .typename = "IO-APIC-level", + .startup = startup_level_ioapic, + .shutdown = shutdown_level_ioapic, + .enable = enable_level_ioapic, + .disable = disable_level_ioapic, + .ack = mask_and_ack_level_ioapic, + .end = end_level_ioapic, +#ifdef CONFIG_SMP + .set_affinity = set_ioapic_affinity, +#endif +}; +#endif /* !CONFIG_XEN */ + +static inline void init_IO_APIC_traps(void) +{ + int irq; + + /* + * NOTE! The local APIC isn't very good at handling + * multiple interrupts at the same interrupt level. + * As the interrupt level is determined by taking the + * vector number and shifting that right by 4, we + * want to spread these out a bit so that they don't + * all fall in the same interrupt level. + * + * Also, we've got to be careful not to trash gate + * 0x80, because int 0x80 is hm, kind of importantish. ;) + */ + for (irq = 0; irq < NR_IRQS ; irq++) { + int tmp = irq; + if (use_pci_vector()) { + if (!platform_legacy_irq(tmp)) + if ((tmp = vector_to_irq(tmp)) == -1) + continue; + } + if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) { + /* + * Hmm.. We don't have an entry for this, + * so default to an old-fashioned 8259 + * interrupt if we can.. + */ + if (irq < 16) + make_8259A_irq(irq); +#ifndef CONFIG_XEN + else + /* Strange. Oh, well.. */ + irq_desc[irq].handler = &no_irq_type; +#endif + } + } +} + +#ifndef CONFIG_XEN +static void enable_lapic_irq (unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED); +} + +static void disable_lapic_irq (unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); +} + +static void ack_lapic_irq (unsigned int irq) +{ + ack_APIC_irq(); +} + +static void end_lapic_irq (unsigned int i) { /* nothing */ } + +static struct hw_interrupt_type lapic_irq_type __read_mostly = { + .typename = "local-APIC-edge", + .startup = NULL, /* startup_irq() not used for IRQ0 */ + .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ + .enable = enable_lapic_irq, + .disable = disable_lapic_irq, + .ack = ack_lapic_irq, + .end = end_lapic_irq +}; + +static void setup_nmi (void) +{ + /* + * Dirty trick to enable the NMI watchdog ... + * We put the 8259A master into AEOI mode and + * unmask on all local APICs LVT0 as NMI. + * + * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') + * is from Maciej W. Rozycki - so we do not have to EOI from + * the NMI handler or the timer interrupt. + */ + apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); + + on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1); + + apic_printk(APIC_VERBOSE, " done.\n"); +} + +/* + * This looks a bit hackish but it's about the only one way of sending + * a few INTA cycles to 8259As and any associated glue logic. ICR does + * not support the ExtINT mode, unfortunately. We need to send these + * cycles as some i82489DX-based boards have glue logic that keeps the + * 8259A interrupt line asserted until INTA. --macro + */ +static inline void unlock_ExtINT_logic(void) +{ + int apic, pin, i; + struct IO_APIC_route_entry entry0, entry1; + unsigned char save_control, save_freq_select; + unsigned long flags; + + pin = find_isa_irq_pin(8, mp_INT); + apic = find_isa_irq_apic(8, mp_INT); + if (pin == -1) + return; + + spin_lock_irqsave(&ioapic_lock, flags); + *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + clear_IO_APIC_pin(apic, pin); + + memset(&entry1, 0, sizeof(entry1)); + + entry1.dest_mode = 0; /* physical delivery */ + entry1.mask = 0; /* unmask IRQ now */ + entry1.dest.physical.physical_dest = hard_smp_processor_id(); + entry1.delivery_mode = dest_ExtINT; + entry1.polarity = entry0.polarity; + entry1.trigger = 0; + entry1.vector = 0; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + + save_control = CMOS_READ(RTC_CONTROL); + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, + RTC_FREQ_SELECT); + CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); + + i = 100; + while (i-- > 0) { + mdelay(10); + if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) + i -= 10; + } + + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + clear_IO_APIC_pin(apic, pin); + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +int timer_uses_ioapic_pin_0; + +/* + * This code may look a bit paranoid, but it's supposed to cooperate with + * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ + * is so screwy. Thanks to Brian Perkins for testing/hacking this beast + * fanatically on his truly buggy board. + */ +static inline void check_timer(void) +{ + int apic1, pin1, apic2, pin2; + int vector; + + /* + * get/set the timer IRQ vector: + */ + disable_8259A_irq(0); + vector = assign_irq_vector(0); + set_intr_gate(vector, interrupt[0]); + + /* + * Subtle, code in do_timer_interrupt() expects an AEOI + * mode for the 8259A whenever interrupts are routed + * through I/O APICs. Also IRQ0 has to be enabled in + * the 8259A which implies the virtual wire has to be + * disabled in the local APIC. + */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + init_8259A(1); + timer_ack = 1; + if (timer_over_8254 > 0) + enable_8259A_irq(0); + + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; + + if (pin1 == 0) + timer_uses_ioapic_pin_0 = 1; + + printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", + vector, apic1, pin1, apic2, pin2); + + if (pin1 != -1) { + /* + * Ok, does IRQ0 through the IOAPIC work? + */ + unmask_IO_APIC_irq(0); + if (timer_irq_works()) { + if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); + setup_nmi(); + enable_8259A_irq(0); + } + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); + return; + } + clear_IO_APIC_pin(apic1, pin1); + printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " + "IO-APIC\n"); + } + + printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); + if (pin2 != -1) { + printk("\n..... (found pin %d) ...", pin2); + /* + * legacy devices should be connected to IO APIC #0 + */ + setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + if (timer_irq_works()) { + printk("works.\n"); + if (pin1 != -1) + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + else + add_pin_to_irq(0, apic2, pin2); + if (nmi_watchdog == NMI_IO_APIC) { + setup_nmi(); + } + return; + } + /* + * Cleanup, just in case ... + */ + clear_IO_APIC_pin(apic2, pin2); + } + printk(" failed.\n"); + + if (nmi_watchdog == NMI_IO_APIC) { + printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); + nmi_watchdog = 0; + } + + printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); + + disable_8259A_irq(0); + irq_desc[0].handler = &lapic_irq_type; + apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ + enable_8259A_irq(0); + + if (timer_irq_works()) { + printk(" works.\n"); + return; + } + apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); + printk(" failed.\n"); + + printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); + + timer_ack = 0; + init_8259A(0); + make_8259A_irq(0); + apic_write_around(APIC_LVT0, APIC_DM_EXTINT); + + unlock_ExtINT_logic(); + + if (timer_irq_works()) { + printk(" works.\n"); + return; + } + printk(" failed :(.\n"); + panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " + "report. Then try booting with the 'noapic' option"); +} +#else +int timer_uses_ioapic_pin_0; +#define check_timer() ((void)0) +#endif + +/* + * + * IRQ's that are handled by the PIC in the MPS IOAPIC case. + * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. + * Linux doesn't really care, as it's not actually used + * for any interrupt handling anyway. + */ +#define PIC_IRQS (1 << PIC_CASCADE_IR) + +void __init setup_IO_APIC(void) +{ + enable_IO_APIC(); + + if (acpi_ioapic) + io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ + else + io_apic_irqs = ~PIC_IRQS; + + printk("ENABLING IO-APIC IRQs\n"); + + /* + * Set up IO-APIC IRQ routing. + */ + if (!acpi_ioapic) + setup_ioapic_ids_from_mpc(); +#ifndef CONFIG_XEN + sync_Arb_IDs(); +#endif + setup_IO_APIC_irqs(); + init_IO_APIC_traps(); + check_timer(); + if (!acpi_ioapic) + print_IO_APIC(); +} + +static int __init setup_disable_8254_timer(char *s) +{ + timer_over_8254 = -1; + return 1; +} +static int __init setup_enable_8254_timer(char *s) +{ + timer_over_8254 = 2; + return 1; +} + +__setup("disable_8254_timer", setup_disable_8254_timer); +__setup("enable_8254_timer", setup_enable_8254_timer); + +/* + * Called after all the initialization is done. If we didnt find any + * APIC bugs then we can allow the modify fast path + */ + +static int __init io_apic_bug_finalize(void) +{ + if(sis_apic_bug == -1) + sis_apic_bug = 0; + if (xen_start_info->flags & SIF_INITDOMAIN) { + dom0_op_t op = { .cmd = DOM0_PLATFORM_QUIRK }; + op.u.platform_quirk.quirk_id = sis_apic_bug ? + QUIRK_IOAPIC_BAD_REGSEL : QUIRK_IOAPIC_GOOD_REGSEL; + HYPERVISOR_dom0_op(&op); + } + return 0; +} + +late_initcall(io_apic_bug_finalize); + +struct sysfs_ioapic_data { + struct sys_device dev; + struct IO_APIC_route_entry entry[0]; +}; +static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; + +static int ioapic_suspend(struct sys_device *dev, pm_message_t state) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + unsigned long flags; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + spin_lock_irqsave(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { + *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i); + *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i); + } + spin_unlock_irqrestore(&ioapic_lock, flags); + + return 0; +} + +static int ioapic_resume(struct sys_device *dev) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + unsigned long flags; + union IO_APIC_reg_00 reg_00; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(dev->id, 0); + if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + io_apic_write(dev->id, 0, reg_00.raw); + } + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { + io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1)); + io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0)); + } + spin_unlock_irqrestore(&ioapic_lock, flags); + + return 0; +} + +static struct sysdev_class ioapic_sysdev_class = { + set_kset_name("ioapic"), + .suspend = ioapic_suspend, + .resume = ioapic_resume, +}; + +static int __init ioapic_init_sysfs(void) +{ + struct sys_device * dev; + int i, size, error = 0; + + error = sysdev_class_register(&ioapic_sysdev_class); + if (error) + return error; + + for (i = 0; i < nr_ioapics; i++ ) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] + * sizeof(struct IO_APIC_route_entry); + mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + if (!mp_ioapic_data[i]) { + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + memset(mp_ioapic_data[i], 0, size); + dev = &mp_ioapic_data[i]->dev; + dev->id = i; + dev->cls = &ioapic_sysdev_class; + error = sysdev_register(dev); + if (error) { + kfree(mp_ioapic_data[i]); + mp_ioapic_data[i] = NULL; + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + } + + return 0; +} + +device_initcall(ioapic_init_sysfs); + +/* -------------------------------------------------------------------------- + ACPI-based IOAPIC Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +int __init io_apic_get_unique_id (int ioapic, int apic_id) +{ +#ifndef CONFIG_XEN + union IO_APIC_reg_00 reg_00; + static physid_mask_t apic_id_map = PHYSID_MASK_NONE; + physid_mask_t tmp; + unsigned long flags; + int i = 0; + + /* + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only + * supports up to 16 on one shared APIC bus. + * + * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full + * advantage of new APIC bus architecture. + */ + + if (physids_empty(apic_id_map)) + apic_id_map = ioapic_phys_id_map(phys_cpu_present_map); + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + if (apic_id >= get_physical_broadcast()) { + printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " + "%d\n", ioapic, apic_id, reg_00.bits.ID); + apic_id = reg_00.bits.ID; + } + + /* + * Every APIC in a system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (check_apicid_used(apic_id_map, apic_id)) { + + for (i = 0; i < get_physical_broadcast(); i++) { + if (!check_apicid_used(apic_id_map, i)) + break; + } + + if (i == get_physical_broadcast()) + panic("Max apic_id exceeded!\n"); + + printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " + "trying %d\n", ioapic, apic_id, i); + + apic_id = i; + } + + tmp = apicid_to_cpu_present(apic_id); + physids_or(apic_id_map, apic_id_map, tmp); + + if (reg_00.bits.ID != apic_id) { + reg_00.bits.ID = apic_id; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic, 0, reg_00.raw); + reg_00.raw = io_apic_read(ioapic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + /* Sanity check */ + if (reg_00.bits.ID != apic_id) { + printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); + return -1; + } + } + + apic_printk(APIC_VERBOSE, KERN_INFO + "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); +#endif /* !CONFIG_XEN */ + + return apic_id; +} + + +int __init io_apic_get_version (int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.version; +} + + +int __init io_apic_get_redir_entries (int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.entries; +} + + +int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) +{ + struct IO_APIC_route_entry entry; + unsigned long flags; + + if (!IO_APIC_IRQ(irq)) { + printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", + ioapic); + return -EINVAL; + } + + /* + * Generate a PCI IRQ routing entry and program the IOAPIC accordingly. + * Note that we mask (disable) IRQs now -- these get enabled when the + * corresponding device driver registers for this IRQ. + */ + + memset(&entry,0,sizeof(entry)); + + entry.delivery_mode = INT_DELIVERY_MODE; + entry.dest_mode = INT_DEST_MODE; + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.trigger = edge_level; + entry.polarity = active_high_low; + entry.mask = 1; + + /* + * IRQs < 16 are already in the irq_2_pin[] map + */ + if (irq >= 16) + add_pin_to_irq(irq, ioapic, pin); + + entry.vector = assign_irq_vector(irq); + + apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " + "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, + mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, + edge_level, active_high_low); + + ioapic_register_intr(irq, entry.vector, edge_level); + + if (!ioapic && (irq < 16)) + disable_8259A_irq(irq); + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); + set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return 0; +} + +#endif /* CONFIG_ACPI */