X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fi386%2Fkernel%2Fmpparse.c;fp=arch%2Fi386%2Fkernel%2Fmpparse.c;h=6b1392d33ed51d6fcb424b9c839d7768cc840a09;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=1347ab4939e7ee000fad9b7b58b7c1b19499d959;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 1347ab493..6b1392d33 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -14,7 +14,6 @@ */ #include -#include #include #include #include @@ -65,11 +64,12 @@ int nr_ioapics; int pic_mode; unsigned long mp_lapic_addr; +unsigned int def_to_bigsmp = 0; + /* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid = -1U; -unsigned int boot_cpu_logical_apicid = -1U; /* Internal processor count */ -static unsigned int __initdata num_processors; +static unsigned int __devinitdata num_processors; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map; @@ -104,25 +104,10 @@ static int __init mpf_checksum(unsigned char *mp, int len) static int mpc_record; static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __initdata; -#ifdef CONFIG_X86_NUMAQ -static int MP_valid_apicid(int apicid, int version) -{ - return hweight_long(apicid & 0xf) == 1 && (apicid >> 4) != 0xf; -} -#else -static int MP_valid_apicid(int apicid, int version) -{ - if (version >= 0x14) - return apicid < 0xff; - else - return apicid < 0xf; -} -#endif - -static void __init MP_processor_info (struct mpc_config_processor *m) +static void __devinit MP_processor_info (struct mpc_config_processor *m) { int ver, apicid; - physid_mask_t tmp; + physid_mask_t phys_cpu; if (!(m->mpc_cpuflag & CPU_ENABLED)) return; @@ -180,41 +165,58 @@ static void __init MP_processor_info (struct mpc_config_processor *m) if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { Dprintk(" Bootup CPU\n"); boot_cpu_physical_apicid = m->mpc_apicid; - boot_cpu_logical_apicid = apicid; } + ver = m->mpc_apicver; + + /* + * Validate version + */ + if (ver == 0x0) { + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + m->mpc_apicid); + ver = 0x10; + } + apic_version[m->mpc_apicid] = ver; + + phys_cpu = apicid_to_cpu_present(apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); + if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); + " Processor ignored.\n", NR_CPUS); return; } if (num_processors >= maxcpus) { printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); + " Processor ignored.\n", maxcpus); return; } - num_processors++; - ver = m->mpc_apicver; - if (!MP_valid_apicid(apicid, ver)) { - printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n", - m->mpc_apicid, MAX_APICS); - --num_processors; - return; - } + cpu_set(num_processors, cpu_possible_map); + num_processors++; - tmp = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp); - /* - * Validate version + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj */ - if (ver == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid); - ver = 0x10; + if (num_processors > 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(ver)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } } - apic_version[m->mpc_apicid] = ver; bios_cpu_apicid[num_processors - 1] = m->mpc_apicid; } @@ -227,6 +229,13 @@ static void __init MP_bus_info (struct mpc_config_bus *m) mpc_oem_bus_info(m, str, translation_table[mpc_record]); + if (m->mpc_busid >= MAX_MP_BUSSES) { + printk(KERN_WARNING "MP table busid value (%d) for bustype %s " + " is too large, max. supported is %d\n", + m->mpc_busid, str, MAX_MP_BUSSES - 1); + return; + } + if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) { mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) { @@ -655,8 +664,6 @@ void __init get_smp_config (void) struct intel_mp_floating *mpf = mpf_found; /* - * ACPI may be used to obtain the entire SMP configuration or just to - * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that * ACPI supports both logical (e.g. Hyper-Threading) and physical * processors, where MPS only supports physical. */ @@ -690,7 +697,7 @@ void __init get_smp_config (void) * Read the physical hardware table. Anything here will * override the defaults. */ - if (!smp_read_mpc((void *)mpf->mpf_physptr)) { + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { smp_found_config = 0; printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); @@ -808,11 +815,13 @@ void __init find_smp_config (void) smp_scan_config(address, 0x400); } +int es7000_plat; + /* -------------------------------------------------------------------------- ACPI-based MP Configuration -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI void __init mp_register_lapic_address ( u64 address) @@ -828,7 +837,7 @@ void __init mp_register_lapic_address ( } -void __init mp_register_lapic ( +void __devinit mp_register_lapic ( u8 id, u8 enabled) { @@ -858,7 +867,7 @@ void __init mp_register_lapic ( MP_processor_info(&processor); } -#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT)) +#ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 #define MP_MAX_IOAPIC_PIN 127 @@ -895,6 +904,7 @@ void __init mp_register_ioapic ( u32 gsi_base) { int idx = 0; + int tmpid; if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " @@ -914,7 +924,16 @@ void __init mp_register_ioapic ( mp_ioapics[idx].mpc_apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id); + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + tmpid = io_apic_get_unique_id(idx, id); + else + tmpid = id; + if (tmpid == -1) { + nr_ioapics--; + return; + } + mp_ioapics[idx].mpc_apicid = tmpid; mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); /* @@ -982,8 +1001,6 @@ void __init mp_override_legacy_irq ( return; } -int es7000_plat; - void __init mp_config_acpi_legacy_irqs (void) { struct mpc_config_intsrc intsrc; @@ -1055,17 +1072,24 @@ void __init mp_config_acpi_legacy_irqs (void) } } -int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) +#define MAX_GSI_NUM 4096 + +int mp_register_gsi (u32 gsi, int triggering, int polarity) { int ioapic = -1; int ioapic_pin = 0; int idx, bit = 0; + static int pci_irq = 16; + /* + * Mapping between Global System Interrups, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -1094,16 +1118,47 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) if ((1< 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0)) + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_fadt.sci_int) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1, - active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1); + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); return gsi; } -#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/ -#endif /*CONFIG_ACPI_BOOT*/ +#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_ACPI */