X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fi386%2Fkernel%2Freboot.c;h=4163865dd9d408a9523d0194bec0a9601d3a8335;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=6dc27eb70ee72fba7bff75a0e50c2536d995135b;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git diff --git a/arch/i386/kernel/reboot.c b/arch/i386/kernel/reboot.c index 6dc27eb70..4163865dd 100644 --- a/arch/i386/kernel/reboot.c +++ b/arch/i386/kernel/reboot.c @@ -2,6 +2,7 @@ * linux/arch/i386/kernel/reboot.c */ +#include #include #include #include @@ -10,8 +11,11 @@ #include #include #include +#include +#include #include #include +#include #include "mach_reboot.h" #include @@ -19,15 +23,13 @@ * Power off function, if any */ void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); static int reboot_mode; static int reboot_thru_bios; #ifdef CONFIG_SMP -int reboot_smp = 0; static int reboot_cpu = -1; -/* shamelessly grabbed from lib/vsprintf.c for readability */ -#define is_digit(c) ((c) >= '0' && (c) <= '9') #endif static int __init reboot_setup(char *str) { @@ -47,10 +49,9 @@ static int __init reboot_setup(char *str) break; #ifdef CONFIG_SMP case 's': /* "smp" reboot by executing reset on BSP or other CPU*/ - reboot_smp = 1; - if (is_digit(*(str+1))) { + if (isdigit(*(str+1))) { reboot_cpu = (int) (*(str+1) - '0'); - if (is_digit(*(str+2))) + if (isdigit(*(str+2))) reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0'); } /* we will leave sorting out the final value @@ -86,33 +87,9 @@ static int __init set_bios_reboot(struct dmi_system_id *d) return 0; } -/* - * Some machines require the "reboot=s" commandline option, this quirk makes that automatic. - */ -static int __init set_smp_reboot(struct dmi_system_id *d) -{ -#ifdef CONFIG_SMP - if (!reboot_smp) { - reboot_smp = 1; - printk(KERN_INFO "%s series board detected. Selecting SMP-method for reboots.\n", d->ident); - } -#endif - return 0; -} - -/* - * Some machines require the "reboot=b,s" commandline option, this quirk makes that automatic. - */ -static int __init set_smp_bios_reboot(struct dmi_system_id *d) -{ - set_smp_reboot(d); - set_bios_reboot(d); - return 0; -} - static struct dmi_system_id __initdata reboot_dmi_table[] = { { /* Handle problems with rebooting on Dell 1300's */ - .callback = set_smp_bios_reboot, + .callback = set_bios_reboot, .ident = "Dell PowerEdge 1300", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), @@ -135,6 +112,22 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), }, }, + { /* Handle problems with rebooting on HP laptops */ + .callback = set_bios_reboot, + .ident = "HP Compaq Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), + }, + }, + { /* HP laptops have weird reboot issues */ + .callback = set_bios_reboot, + .ident = "HP Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), + }, + }, { } }; @@ -266,13 +259,13 @@ void machine_real_restart(unsigned char *code, int length) /* Set up the IDT for real mode. */ - __asm__ __volatile__ ("lidt %0" : : "m" (real_mode_idt)); + load_idt(&real_mode_idt); /* Set up a GDT from which we can load segment descriptors for real mode. The GDT is not used in real mode; it is just needed here to prepare the descriptors. */ - __asm__ __volatile__ ("lgdt %0" : : "m" (real_mode_gdt)); + load_gdt(&real_mode_gdt); /* Load the data segment registers, and thus the descriptors ready for real mode. The base address of each segment is 0x100, 16 times the @@ -295,42 +288,36 @@ void machine_real_restart(unsigned char *code, int length) : : "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100))); } +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(machine_real_restart); +#endif -void machine_restart(char * __unused) +void machine_shutdown(void) { #ifdef CONFIG_SMP - int cpuid; - - cpuid = GET_APIC_ID(apic_read(APIC_ID)); - - if (reboot_smp) { - - /* check to see if reboot_cpu is valid - if its not, default to the BSP */ - if ((reboot_cpu == -1) || - (reboot_cpu > (NR_CPUS -1)) || - !physid_isset(cpuid, phys_cpu_present_map)) - reboot_cpu = boot_cpu_physical_apicid; - - reboot_smp = 0; /* use this as a flag to only go through this once*/ - /* re-run this function on the other CPUs - it will fall though this section since we have - cleared reboot_smp, and do the reboot if it is the - correct CPU, otherwise it halts. */ - if (reboot_cpu != cpuid) - smp_call_function((void *)machine_restart , NULL, 1, 0); + int reboot_cpu_id; + + /* The boot cpu is always logical cpu 0 */ + reboot_cpu_id = 0; + + /* See if there has been given a command line override */ + if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) && + cpu_isset(reboot_cpu, cpu_online_map)) { + reboot_cpu_id = reboot_cpu; } - /* if reboot_cpu is still -1, then we want a tradional reboot, - and if we are not running on the reboot_cpu,, halt */ - if ((reboot_cpu != -1) && (cpuid != reboot_cpu)) { - for (;;) - __asm__ __volatile__ ("hlt"); + /* Make certain the cpu I'm rebooting on is online */ + if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { + reboot_cpu_id = smp_processor_id(); } - /* - * Stop all CPUs and turn off local APICs and the IO-APIC, so - * other OSs see a clean IRQ state. + + /* Make certain I only run on the appropriate processor */ + set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); + + /* O.K. Now that I'm on the appropriate processor, stop + * all of the others, and disable their local APICs. */ + smp_send_stop(); #endif /* CONFIG_SMP */ @@ -339,11 +326,14 @@ void machine_restart(char * __unused) #ifdef CONFIG_X86_IO_APIC disable_IO_APIC(); #endif +} +void machine_emergency_restart(void) +{ if (!reboot_thru_bios) { if (efi_enabled) { efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL); - __asm__ __volatile__("lidt %0": :"m" (no_idt)); + load_idt(&no_idt); __asm__ __volatile__("int3"); } /* rebooting needs to touch the page at absolute addr 0 */ @@ -352,7 +342,7 @@ void machine_restart(char * __unused) mach_reboot_fixups(); /* for board specific fixups */ mach_reboot(); /* That didn't work - force a triple fault.. */ - __asm__ __volatile__("lidt %0": :"m" (no_idt)); + load_idt(&no_idt); __asm__ __volatile__("int3"); } } @@ -362,23 +352,22 @@ void machine_restart(char * __unused) machine_real_restart(jump_to_bios, sizeof(jump_to_bios)); } -EXPORT_SYMBOL(machine_restart); +void machine_restart(char * __unused) +{ + machine_shutdown(); + machine_emergency_restart(); +} void machine_halt(void) { } -EXPORT_SYMBOL(machine_halt); - void machine_power_off(void) { - lapic_shutdown(); - - if (efi_enabled) - efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL); - if (pm_power_off) + if (pm_power_off) { + machine_shutdown(); pm_power_off(); + } } -EXPORT_SYMBOL(machine_power_off);