X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fmm%2Fhash_low_64.S;fp=arch%2Fpowerpc%2Fmm%2Fhash_low_64.S;h=e0d02c4a2615f8787abc1b13737f7b78e67bc5a5;hb=64ba3f394c830ec48a1c31b53dcae312c56f1604;hp=9bc0a9c2b9bcee59e6ca39fa5b9e7207dc7425b0;hpb=be1e6109ac94a859551f8e1774eb9a8469fe055c;p=linux-2.6.git

diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 9bc0a9c2b..e0d02c4a2 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -10,6 +10,7 @@
  * described in the kernel's COPYING file.
  */
 
+#include <linux/config.h>
 #include <asm/reg.h>
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
@@ -135,7 +136,6 @@ _GLOBAL(__hash_page_4K)
 	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
 	andc	r0,r30,r0		/* r0 = pte & ~r0 */
 	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
-	ori	r3,r3,HPTE_R_C		/* Always add "C" bit for perf. */
 
 	/* We eventually do the icache sync here (maybe inline that
 	 * code rather than call a C function...) 
@@ -368,7 +368,6 @@ _GLOBAL(__hash_page_4K)
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
 	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
-	oris	r30,r30,_PAGE_COMBO@h
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
 	bne-	1b
@@ -401,7 +400,6 @@ _GLOBAL(__hash_page_4K)
 	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
 	andc	r0,r30,r0		/* r0 = pte & ~r0 */
 	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
-	ori	r3,r3,HPTE_R_C		/* Always add "C" bit for perf. */
 
 	/* We eventually do the icache sync here (maybe inline that
 	 * code rather than call a C function...)
@@ -428,14 +426,6 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	andi.	r0,r31,_PAGE_HASHPTE
 	li	r26,0			/* Default hidx */
 	beq	htab_insert_pte
-
-	/*
-	 * Check if the pte was already inserted into the hash table
-	 * as a 64k HW page, and invalidate the 64k HPTE if so.
-	 */
-	andis.	r0,r31,_PAGE_COMBO@h
-	beq	htab_inval_old_hpte
-
 	ld	r6,STK_PARM(r6)(r1)
 	ori	r26,r6,0x8000		/* Load the hidx mask */
 	ld	r26,0(r26)
@@ -506,19 +496,6 @@ _GLOBAL(htab_call_hpte_remove)
 	/* Try all again */
 	b	htab_insert_pte
 
-	/*
-	 * Call out to C code to invalidate an 64k HW HPTE that is
-	 * useless now that the segment has been switched to 4k pages.
-	 */
-htab_inval_old_hpte:
-	mr	r3,r29			/* virtual addr */
-	mr	r4,r31			/* PTE.pte */
-	li	r5,0			/* PTE.hidx */
-	li	r6,MMU_PAGE_64K		/* psize */
-	ld	r7,STK_PARM(r8)(r1)	/* local */
-	bl	.flush_hash_page
-	b	htab_insert_pte
-	
 htab_bail_ok:
 	li	r3,0
 	b	htab_bail
@@ -659,12 +636,6 @@ _GLOBAL(__hash_page_64K)
 	 * is changing this PTE anyway and might hash it.
 	 */
 	bne-	ht64_bail_ok
-BEGIN_FTR_SECTION
-	/* Check if PTE has the cache-inhibit bit set */
-	andi.	r0,r31,_PAGE_NO_CACHE
-	/* If so, bail out and refault as a 4k page */
-	bne-	ht64_bail_ok
-END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
 	/* Prepare new PTE value (turn access RW into DIRTY, then
 	 * add BUSY,HASHPTE and ACCESSED)
 	 */
@@ -700,7 +671,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
 	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
 	andc	r0,r30,r0		/* r0 = pte & ~r0 */
 	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
-	ori	r3,r3,HPTE_R_C		/* Always add "C" bit for perf. */
 
 	/* We eventually do the icache sync here (maybe inline that
 	 * code rather than call a C function...)