X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fplatforms%2Fpowermac%2Fcpufreq_32.c;h=c2b6b4134f6849c28e8871edde719269fa0ab8a0;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=56fd4e05fede95b68d05e91b075e91f2c2ab535b;hpb=64ba3f394c830ec48a1c31b53dcae312c56f1604;p=linux-2.6.git

diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 56fd4e05f..c2b6b4134 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -1,6 +1,4 @@
 /*
- *  arch/ppc/platforms/pmac_cpufreq.c
- *
  *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
  *  Copyright (C) 2004        John Steele Scott <toojays@toojays.net>
  *
@@ -15,7 +13,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/errno.h>
@@ -70,7 +67,7 @@ static unsigned int cur_freq;
 static unsigned int sleep_freq;
 
 /*
- * Different models uses different mecanisms to switch the frequency
+ * Different models uses different mechanisms to switch the frequency
  */
 static int (*set_speed_proc)(int low_speed);
 static unsigned int (*get_speed_proc)(void);
@@ -270,7 +267,7 @@ static int pmu_set_cpu_speed(int low_speed)
 
 	/* Make sure the decrementer won't interrupt us */
 	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-	/* Make sure any pending DEC interrupt occuring while we did
+	/* Make sure any pending DEC interrupt occurring while we did
 	 * the above didn't re-enable the DEC */
 	mb();
 	asm volatile("mtdec %0" : : "r" (0x7fffffff));
@@ -316,7 +313,7 @@ static int pmu_set_cpu_speed(int low_speed)
  		_set_L3CR(save_l3cr);
 
 	/* Restore userland MMU context */
-	set_context(current->active_mm->context, current->active_mm->pgd);
+	set_context(current->active_mm->context.id, current->active_mm->pgd);
 
 #ifdef DEBUG_FREQ
 	printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
@@ -424,7 +421,7 @@ static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 static u32 read_gpio(struct device_node *np)
 {
-	u32 *reg = (u32 *)get_property(np, "reg", NULL);
+	const u32 *reg = get_property(np, "reg", NULL);
 	u32 offset;
 
 	if (reg == NULL)
@@ -500,7 +497,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 								"frequency-gpio");
 	struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
 								     "slewing-done");
-	u32 *value;
+	const u32 *value;
 
 	/*
 	 * Check to see if it's GPIO driven or PMU only
@@ -522,15 +519,15 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	 */
 	if (frequency_gpio && slew_done_gpio) {
 		int lenp, rc;
-		u32 *freqs, *ratio;
+		const u32 *freqs, *ratio;
 
-		freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp);
+		freqs = get_property(cpunode, "bus-frequencies", &lenp);
 		lenp /= sizeof(u32);
 		if (freqs == NULL || lenp != 2) {
 			printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
 			return 1;
 		}
-		ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL);
+		ratio = get_property(cpunode, "processor-to-bus-ratio*2", NULL);
 		if (ratio == NULL) {
 			printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
 			return 1;
@@ -565,7 +562,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	/* If we use the PMU, look for the min & max frequencies in the
 	 * device-tree
 	 */
-	value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL);
+	value = get_property(cpunode, "min-clock-frequency", NULL);
 	if (!value)
 		return 1;
 	low_freq = (*value) / 1000;
@@ -574,7 +571,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	if (low_freq < 100000)
 		low_freq *= 10;
 
-	value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL);
+	value = get_property(cpunode, "max-clock-frequency", NULL);
 	if (!value)
 		return 1;
 	hi_freq = (*value) / 1000;
@@ -614,13 +611,14 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
 static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
 {
 	struct device_node *volt_gpio_np;
-	u32 pvr, *value;
+	u32 pvr;
+	const u32 *value;
 
 	if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
 		return 1;
 
 	hi_freq = cur_freq;
-	value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL);
+	value = get_property(cpunode, "reduced-clock-frequency", NULL);
 	if (!value)
 		return 1;
 	low_freq = (*value) / 1000;
@@ -653,7 +651,7 @@ static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
 static int __init pmac_cpufreq_setup(void)
 {
 	struct device_node	*cpunode;
-	u32			*value;
+	const u32		*value;
 
 	if (strstr(cmd_line, "nocpufreq"))
 		return 0;
@@ -664,7 +662,7 @@ static int __init pmac_cpufreq_setup(void)
 		goto out;
 
 	/* Get current cpu clock freq */
-	value = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+	value = get_property(cpunode, "clock-frequency", NULL);
 	if (!value)
 		goto out;
 	cur_freq = (*value) / 1000;