X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fppc%2Fboot%2Fcommon%2Fns16550.c;fp=arch%2Fppc%2Fboot%2Fcommon%2Fns16550.c;h=4f00c93ac870240cac5807aadb8c29c15120198c;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=9017c547a6f6fe8c073403e908182c7b621bd56f;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
index 9017c547a..4f00c93ac 100644
--- a/arch/ppc/boot/common/ns16550.c
+++ b/arch/ppc/boot/common/ns16550.c
@@ -8,6 +8,9 @@
 #include <linux/serial_reg.h>
 #include <asm/serial.h>
 
+#if defined(CONFIG_XILINX_VIRTEX)
+#include <platforms/4xx/xparameters/xparameters.h>
+#endif
 #include "nonstdio.h"
 #include "serial.h"
 
@@ -23,7 +26,7 @@ static int shift;
 
 unsigned long serial_init(int chan, void *ignored)
 {
-	unsigned long com_port;
+	unsigned long com_port, base_baud;
 	unsigned char lcr, dlm;
 
 	/* We need to find out which type io we're expecting.  If it's
@@ -43,6 +46,8 @@ unsigned long serial_init(int chan, void *ignored)
 
 	/* How far apart the registers are. */
 	shift = rs_table[chan].iomem_reg_shift;
+	/* Base baud.. */
+	base_baud = rs_table[chan].baud_base;
 	
 	/* save the LCR */
 	lcr = inb(com_port + (UART_LCR << shift));
@@ -62,9 +67,9 @@ unsigned long serial_init(int chan, void *ignored)
 	else {
 		/* Input clock. */
 		outb(com_port + (UART_DLL << shift),
-		     (BASE_BAUD / SERIAL_BAUD) & 0xFF);
+		     (base_baud / SERIAL_BAUD) & 0xFF);
 		outb(com_port + (UART_DLM << shift),
-		     (BASE_BAUD / SERIAL_BAUD) >> 8);
+		     (base_baud / SERIAL_BAUD) >> 8);
 		/* 8 data, 1 stop, no parity */
 		outb(com_port + (UART_LCR << shift), 0x03);
 		/* RTS/DTR */