X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fppc%2Fkernel%2Fentry.S;h=a9d455369dc6b5a6ddb9455747c695dbe4079d04;hb=refs%2Fheads%2Fvserver;hp=3a28159784883df5b54a4de11538aa922ea7cf87;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 3a2815978..a9d455369 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -19,7 +19,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/sys.h>
 #include <linux/threads.h>
@@ -128,45 +127,48 @@ transfer_to_handler:
 	stw	r12,4(r11)
 #endif
 	b	3f
+
 2:	/* if from kernel, check interrupted DOZE/NAP mode and
          * check for stack overflow
          */
+	lwz	r9,THREAD_INFO-THREAD(r12)
+	cmplw	r1,r9			/* if r1 <= current->thread_info */
+	ble-	stack_ovf		/* then the kernel stack overflowed */
+5:
 #ifdef CONFIG_6xx
-	mfspr	r11,SPRN_HID0
-	mtcr	r11
-BEGIN_FTR_SECTION
-	bt-	8,power_save_6xx_restore	/* Check DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
-	bt-	9,power_save_6xx_restore	/* Check NAP */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	tophys(r9,r9)			/* check local flags */
+	lwz	r12,TI_LOCAL_FLAGS(r9)
+	mtcrf	0x01,r12
+	bt-	31-TLF_NAPPING,4f
 #endif /* CONFIG_6xx */
 	.globl transfer_to_handler_cont
 transfer_to_handler_cont:
-	lwz	r11,THREAD_INFO-THREAD(r12)
-	cmplw	r1,r11			/* if r1 <= current->thread_info */
-	ble-	stack_ovf		/* then the kernel stack overflowed */
 3:
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
-	FIX_SRR1(r10,r12)
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
 	mtlr	r9
 	SYNC
 	RFI				/* jump to handler, enable MMU */
 
+#ifdef CONFIG_6xx
+4:	rlwinm	r12,r12,0,~_TLF_NAPPING
+	stw	r12,TI_LOCAL_FLAGS(r9)
+	b	power_save_6xx_restore
+#endif
+
 /*
  * On kernel stack overflow, load up an initial stack pointer
  * and call StackOverflow(regs), which should not return.
  */
 stack_ovf:
 	/* sometimes we use a statically-allocated stack, which is OK. */
-	lis	r11,_end@h
-	ori	r11,r11,_end@l
-	cmplw	r1,r11
-	ble	3b			/* r1 <= &_end is OK */
+	lis	r12,_end@h
+	ori	r12,r12,_end@l
+	cmplw	r1,r12
+	ble	5b			/* r1 <= &_end is OK */
 	SAVE_NVGPRS(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	lis	r1,init_thread_union@ha
@@ -926,55 +928,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
 	b	4b
 
 	.comm	ee_restarts,4
-
-/*
- * PROM code for specific machines follows.  Put it
- * here so it's easy to add arch-specific sections later.
- * -- Cort
- */
-#ifdef CONFIG_PPC_OF
-/*
- * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
- * called with the MMU off.
- */
-_GLOBAL(enter_rtas)
-	stwu	r1,-INT_FRAME_SIZE(r1)
-	mflr	r0
-	stw	r0,INT_FRAME_SIZE+4(r1)
-	lis	r4,rtas_data@ha
-	lwz	r4,rtas_data@l(r4)
-	lis	r6,1f@ha	/* physical return address for rtas */
-	addi	r6,r6,1f@l
-	tophys(r6,r6)
-	tophys(r7,r1)
-	lis	r8,rtas_entry@ha
-	lwz	r8,rtas_entry@l(r8)
-	mfmsr	r9
-	stw	r9,8(r1)
-	LOAD_MSR_KERNEL(r0,MSR_KERNEL)
-	SYNC			/* disable interrupts so SRR0/1 */
-	MTMSRD(r0)		/* don't get trashed */
-	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	mtlr	r6
-	CLR_TOP32(r7)
-	mtspr	SPRN_SPRG2,r7
-	mtspr	SPRN_SRR0,r8
-	mtspr	SPRN_SRR1,r9
-	RFI
-1:	tophys(r9,r1)
-	lwz	r8,INT_FRAME_SIZE+4(r9)	/* get return address */
-	lwz	r9,8(r9)	/* original msr value */
-	FIX_SRR1(r9,r0)
-	addi	r1,r1,INT_FRAME_SIZE
-	li	r0,0
-	mtspr	SPRN_SPRG2,r0
-	mtspr	SPRN_SRR0,r8
-	mtspr	SPRN_SRR1,r9
-	RFI			/* return to caller */
-
-	.globl	machine_check_in_rtas
-machine_check_in_rtas:
-	twi	31,0,0
-	/* XXX load up BATs and panic */
-
-#endif /* CONFIG_PPC_OF */