X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fppc%2Fkernel%2Fsetup.c;h=1f79e84ab464dd8a416eaab3d104e8aff11ea6d5;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=5c20266e3b1fd80c45f88af83d0a3b3b475d5bd4;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 5c20266e3..1f79e84ab 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -1,5 +1,5 @@ /* - * Common prep/pmac/chrp boot and setup code. + * Common prep boot and setup code. */ #include @@ -35,13 +35,16 @@ #include #include #include -#include #include #include #include #include -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \ + defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ + defined(CONFIG_PPC_MPC52xx)) + +#if USES_PPC_SYS #include #endif @@ -51,7 +54,6 @@ extern void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void bootx_init(unsigned long r4, unsigned long phys); extern void identify_cpu(unsigned long offset, unsigned long cpu); extern void do_cpu_ftr_fixups(unsigned long offset); extern void reloc_got2(unsigned long offset); @@ -61,26 +63,29 @@ extern void power4_idle(void); extern boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; -char *sysmap; -unsigned long sysmap_size; /* Used with the BI_MEMSIZE bootinfo parameter to store the memory size value reported by the boot loader. */ unsigned long boot_mem_size; unsigned long ISA_DMA_THRESHOLD; -unsigned long DMA_MODE_READ, DMA_MODE_WRITE; - -#ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; +unsigned int DMA_MODE_READ; +unsigned int DMA_MODE_WRITE; +#ifdef CONFIG_PPC_PREP extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void pmac_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); -extern void chrp_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); -#endif /* CONFIG_PPC_MULTIPLATFORM */ + +dev_t boot_dev; +#endif /* CONFIG_PPC_PREP */ + +int have_of; +EXPORT_SYMBOL(have_of); + +#ifdef __DO_IRQ_CANON +int ppc_do_canonicalize_irqs; +EXPORT_SYMBOL(ppc_do_canonicalize_irqs); +#endif #ifdef CONFIG_MAGIC_SYSRQ unsigned long SYSRQ_KEY = 0x54; @@ -123,8 +128,6 @@ void machine_restart(char *cmd) ppc_md.restart(cmd); } -EXPORT_SYMBOL(machine_restart); - void machine_power_off(void) { #ifdef CONFIG_NVRAM @@ -133,8 +136,6 @@ void machine_power_off(void) ppc_md.power_off(); } -EXPORT_SYMBOL(machine_power_off); - void machine_halt(void) { #ifdef CONFIG_NVRAM @@ -143,8 +144,6 @@ void machine_halt(void) ppc_md.halt(); } -EXPORT_SYMBOL(machine_halt); - void (*pm_power_off)(void) = machine_power_off; #ifdef CONFIG_TAU @@ -164,9 +163,8 @@ int show_cpuinfo(struct seq_file *m, void *v) /* Show summary information */ #ifdef CONFIG_SMP unsigned long bogosum = 0; - for (i = 0; i < NR_CPUS; ++i) - if (cpu_online(i)) - bogosum += cpu_data[i].loops_per_jiffy; + for_each_online_cpu(i) + bogosum += cpu_data[i].loops_per_jiffy; seq_printf(m, "total bogomips\t: %lu.%02lu\n", bogosum/(500000/HZ), bogosum/(5000/HZ) % 100); #endif /* CONFIG_SMP */ @@ -189,18 +187,18 @@ int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n", i); seq_printf(m, "cpu\t\t: "); - if (cur_cpu_spec[i]->pvr_mask) - seq_printf(m, "%s", cur_cpu_spec[i]->cpu_name); + if (cur_cpu_spec->pvr_mask) + seq_printf(m, "%s", cur_cpu_spec->cpu_name); else seq_printf(m, "unknown (%08x)", pvr); #ifdef CONFIG_ALTIVEC - if (cur_cpu_spec[i]->cpu_features & CPU_FTR_ALTIVEC) + if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC) seq_printf(m, ", altivec supported"); #endif seq_printf(m, "\n"); #ifdef CONFIG_TAU - if (cur_cpu_spec[i]->cpu_features & CPU_FTR_TAU) { + if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) { #ifdef CONFIG_TAU_AVERAGE /* more straightforward, but potentially misleading */ seq_printf(m, "temperature \t: %u C (uncalibrated)\n", @@ -249,7 +247,7 @@ int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "bogomips\t: %lu.%02lu\n", lpj / (500000/HZ), (lpj / (5000/HZ)) % 100); -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#if USES_PPC_SYS if (cur_ppc_sys_spec->ppc_sys_name) seq_printf(m, "chipset\t\t: %s\n", cur_ppc_sys_spec->ppc_sys_name); @@ -316,77 +314,12 @@ early_init(int r3, int r4, int r5) identify_cpu(offset, 0); do_cpu_ftr_fixups(offset); -#if defined(CONFIG_PPC_MULTIPLATFORM) - reloc_got2(offset); - - /* If we came here from BootX, clear the screen, - * set up some pointers and return. */ - if ((r3 == 0x426f6f58) && (r5 == 0)) - bootx_init(r4, phys); - - /* - * don't do anything on prep - * for now, don't use bootinfo because it breaks yaboot 0.5 - * and assume that if we didn't find a magic number, we have OF - */ - else if (*(unsigned long *)(0) != 0xdeadc0de) - phys = prom_init(r3, r4, (prom_entry)r5); - - reloc_got2(-offset); -#endif - return phys; } -#ifdef CONFIG_PPC_OF -/* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ -int __openfirmware -of_show_percpuinfo(struct seq_file *m, int i) -{ - struct device_node *cpu_node; - u32 *fp; - int s; - - cpu_node = find_type_devices("cpu"); - if (!cpu_node) - return 0; - for (s = 0; s < i && cpu_node->next; s++) - cpu_node = cpu_node->next; - fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL); - if (fp) - seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000); - return 0; -} - -void __init -intuit_machine_type(void) -{ - char *model; - struct device_node *root; - - /* ask the OF info if we're a chrp or pmac */ - root = find_path_device("/"); - if (root != 0) { - /* assume pmac unless proven to be chrp -- Cort */ - _machine = _MACH_Pmac; - model = get_property(root, "device_type", NULL); - if (model && !strncmp("chrp", model, 4)) - _machine = _MACH_chrp; - else { - model = get_property(root, "model", NULL); - if (model && !strncmp(model, "IBM", 3)) - _machine = _MACH_chrp; - } - } -} -#endif - -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP /* - * The PPC_MULTIPLATFORM version of platform_init... + * The PPC_PREP version of platform_init... */ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, @@ -401,154 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, parse_bootinfo(find_bootinfo()); - /* if we didn't get any bootinfo telling us what we are... */ - if (_machine == 0) { - /* prep boot loader tells us if we're prep or not */ - if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) - _machine = _MACH_prep; - } - - /* not much more to do here, if prep */ - if (_machine == _MACH_prep) { - prep_init(r3, r4, r5, r6, r7); - return; - } - - /* prom_init has already been called from __start */ - if (boot_infos) - relocate_nodes(); - - /* If we aren't PReP, we can find out if we're Pmac - * or CHRP with this. */ - if (_machine == 0) - intuit_machine_type(); - - /* finish_device_tree may need _machine defined. */ - finish_device_tree(); - - /* - * If we were booted via quik, r3 points to the physical - * address of the command-line parameters. - * If we were booted from an xcoff image (i.e. netbooted or - * booted from floppy), we get the command line from the - * bootargs property of the /chosen node. - * If an initial ramdisk is present, r3 and r4 - * are used for initrd_start and initrd_size, - * otherwise they contain 0xdeadbeef. - */ - if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) { - strlcpy(cmd_line, (char *)r3 + KERNELBASE, - sizeof(cmd_line)); - } else if (boot_infos != 0) { - /* booted by BootX - check for ramdisk */ - if (boot_infos->kernelParamsOffset != 0) - strlcpy(cmd_line, (char *) boot_infos - + boot_infos->kernelParamsOffset, - sizeof(cmd_line)); -#ifdef CONFIG_BLK_DEV_INITRD - if (boot_infos->ramDisk) { - initrd_start = (unsigned long) boot_infos - + boot_infos->ramDisk; - initrd_end = initrd_start + boot_infos->ramDiskSize; - initrd_below_start_ok = 1; - } -#endif - } else { - struct device_node *chosen; - char *p; - -#ifdef CONFIG_BLK_DEV_INITRD - if (r3 && r4 && r4 != 0xdeadbeef) { - if (r3 < KERNELBASE) - r3 += KERNELBASE; - initrd_start = r3; - initrd_end = r3 + r4; - ROOT_DEV = Root_RAM0; - initrd_below_start_ok = 1; - } -#endif - chosen = find_devices("chosen"); - if (chosen != NULL) { - p = get_property(chosen, "bootargs", NULL); - if (p && *p) { - strlcpy(cmd_line, p, sizeof(cmd_line)); - } - } - } -#ifdef CONFIG_ADB - if (strstr(cmd_line, "adb_sync")) { - extern int __adb_probe_sync; - __adb_probe_sync = 1; - } -#endif /* CONFIG_ADB */ - - switch (_machine) { - case _MACH_Pmac: - pmac_init(r3, r4, r5, r6, r7); - break; - case _MACH_chrp: - chrp_init(r3, r4, r5, r6, r7); - break; - } + prep_init(r3, r4, r5, r6, r7); } - -#ifdef CONFIG_SERIAL_CORE_CONSOLE -extern char *of_stdout_device; - -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout; - char *name; - int offset = 0; - - if (of_stdout_device == NULL) - return -ENODEV; - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) - return -EBUSY; - - prom_stdout = find_path_device(of_stdout_device); - if (!prom_stdout) - return -ENODEV; - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) - return -ENODEV; - - if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - return -ENODEV; - } - } - } else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; - else - return -ENODEV; - return add_preferred_console("ttyS", offset, NULL); -} -console_initcall(set_preferred_console); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_PPC_PREP */ struct bi_record *find_bootinfo(void) { @@ -578,22 +366,12 @@ void parse_bootinfo(struct bi_record *rec) case BI_CMD_LINE: strlcpy(cmd_line, (void *)data, sizeof(cmd_line)); break; - case BI_SYSMAP: - sysmap = (char *)((data[0] >= (KERNELBASE)) ? data[0] : - (data[0]+KERNELBASE)); - sysmap_size = data[1]; - break; #ifdef CONFIG_BLK_DEV_INITRD case BI_INITRD: initrd_start = data[0] + KERNELBASE; initrd_end = data[0] + data[1] + KERNELBASE; break; #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_MULTIPLATFORM - case BI_MACHTYPE: - _machine = data[0]; - break; -#endif case BI_MEMSIZE: boot_mem_size = data[0]; break; @@ -619,15 +397,32 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_6xx ppc_md.power_save = ppc6xx_idle; #endif -#ifdef CONFIG_POWER4 - ppc_md.power_save = power4_idle; -#endif platform_init(r3, r4, r5, r6, r7); if (ppc_md.progress) ppc_md.progress("id mach(): done", 0x200); } +#ifdef CONFIG_BOOKE_WDT +/* Checks wdt=x and wdt_period=xx command-line option */ +int __init early_parse_wdt(char *p) +{ + if (p && strncmp(p, "0", 1) != 0) + booke_wdt_enabled = 1; + + return 0; +} +early_param("wdt", early_parse_wdt); + +int __init early_parse_wdt_period (char *p) +{ + if (p) + booke_wdt_period = simple_strtoul(p, NULL, 0); + + return 0; +} +early_param("wdt_period", early_parse_wdt_period); +#endif /* CONFIG_BOOKE_WDT */ /* Checks "l2cr=xxxx" command-line option */ int __init ppc_setup_l2cr(char *str) @@ -679,9 +474,8 @@ int __init ppc_init(void) if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff); /* register CPU devices */ - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) - register_cpu(&cpu_devices[i], i, NULL); + for_each_possible_cpu(i) + register_cpu(&cpu_devices[i], i, NULL); /* call platform init */ if (ppc_md.init != NULL) { @@ -701,16 +495,11 @@ void __init setup_arch(char **cmdline_p) /* so udelay does something sensible, assume <= 1000 bogomips */ loops_per_jiffy = 500000000 / HZ; -#ifdef CONFIG_PPC_MULTIPLATFORM - /* This could be called "early setup arch", it must be done - * now because xmon need it - */ - if (_machine == _MACH_Pmac) - pmac_feature_init(); /* New cool way */ -#endif + if (ppc_md.init_early) + ppc_md.init_early(); #ifdef CONFIG_XMON - xmon_map_scc(); + xmon_init(1); if (strstr(cmd_line, "xmon")) xmon(NULL); #endif /* CONFIG_XMON */ @@ -734,12 +523,12 @@ void __init setup_arch(char **cmdline_p) * for a possibly more accurate value. */ if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) { - dcache_bsize = cur_cpu_spec[0]->dcache_bsize; - icache_bsize = cur_cpu_spec[0]->icache_bsize; + dcache_bsize = cur_cpu_spec->dcache_bsize; + icache_bsize = cur_cpu_spec->icache_bsize; ucache_bsize = 0; } else ucache_bsize = dcache_bsize = icache_bsize - = cur_cpu_spec[0]->dcache_bsize; + = cur_cpu_spec->dcache_bsize; /* reboot on panic */ panic_timeout = 180; @@ -773,7 +562,4 @@ void __init setup_arch(char **cmdline_p) if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); paging_init(); - - /* this is for modules since _machine can be a define -- Cort */ - ppc_md.ppc_machine = _machine; }