X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fppc%2Fplatforms%2F85xx%2Fmpc8540_ads.c;fp=arch%2Fppc%2Fplatforms%2F85xx%2Fmpc8540_ads.c;h=9b014df516b903d818783963695d12c280c77dca;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=583838ab02d8370a97d22640915a3fed84d1eaf6;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
index 583838ab0..9b014df51 100644
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -1,9 +1,7 @@
 /*
- * arch/ppc/platforms/85xx/mpc8540_ads.c
- *
  * MPC8540ADS board specific routines
  *
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
  * Copyright 2004 Freescale Semiconductor Inc.
  *
@@ -24,7 +22,6 @@
 #include <linux/major.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -41,7 +38,6 @@
 #include <asm/time.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
-#include <asm/prom.h>
 #include <asm/open_pic.h>
 #include <asm/bootinfo.h>
 #include <asm/pci-bridge.h>
@@ -65,6 +61,7 @@ mpc8540ads_setup_arch(void)
 	bd_t *binfo = (bd_t *) __res;
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
+	struct gianfar_mdio_data *mdata;
 
 	/* get the core frequency */
 	freq = binfo->bi_intfreq;
@@ -88,33 +85,42 @@ mpc8540ads_setup_arch(void)
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	/* Invalidate the entry we stole earlier the serial ports
 	 * should be properly mapped */
-	invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+	invalidate_tlbcam_entry(num_tlbcam_entries - 1);
 #endif
 
+	/* setup the board related info for the MDIO bus */
+	mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+	mdata->irq[0] = MPC85xx_IRQ_EXT5;
+	mdata->irq[1] = MPC85xx_IRQ_EXT5;
+	mdata->irq[2] = -1;
+	mdata->irq[3] = MPC85xx_IRQ_EXT5;
+	mdata->irq[31] = -1;
+
 	/* setup the board related information for the enet controllers */
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
-	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-	pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-	pdata->phyid = 0;
-	/* fixup phy address */
-	pdata->phy_reg_addr += binfo->bi_immr_base;
-	memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+	if (pdata) {
+		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+		pdata->bus_id = 0;
+		pdata->phy_id = 0;
+		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
-	pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
-	pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-	pdata->phyid = 1;
-	/* fixup phy address */
-	pdata->phy_reg_addr += binfo->bi_immr_base;
-	memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+	if (pdata) {
+		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+		pdata->bus_id = 0;
+		pdata->phy_id = 1;
+		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+	}
 
 	pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
-	pdata->board_flags = 0;
-	pdata->interruptPHY = MPC85xx_IRQ_EXT5;
-	pdata->phyid = 3;
-	/* fixup phy address */
-	pdata->phy_reg_addr += binfo->bi_immr_base;
-	memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+	if (pdata) {
+		pdata->board_flags = 0;
+		pdata->bus_id = 0;
+		pdata->phy_id = 3;
+		memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+	}
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start)
@@ -150,18 +156,18 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		struct uart_port p;
 
 		/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
-		settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
+		settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
 			  binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
 
 		memset(&p, 0, sizeof (p));
-		p.iotype = SERIAL_IO_MEM;
+		p.iotype = UPIO_MEM;
 		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
 		p.uartclk = binfo->bi_busfreq;
 
 		gen550_init(0, &p);
 
 		memset(&p, 0, sizeof (p));
-		p.iotype = SERIAL_IO_MEM;
+		p.iotype = UPIO_MEM;
 		p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
 		p.uartclk = binfo->bi_busfreq;