X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fppc%2Fplatforms%2Fprep_setup.c;fp=arch%2Fppc%2Fplatforms%2Fprep_setup.c;h=e86f6156d5895cee4f099e91b9319aa7cd3337cb;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=bc926be95472f4cede028dc70dea7e7a6443c4e4;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index bc926be95..e86f6156d 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) @@ -61,9 +59,17 @@ #include #include +/* prep registers for L2 */ +#define CACHECRBA 0x80000823 /* Cache configuration register address */ +#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ +#define L2CACHE_512KB 0x00 /* 512KB */ +#define L2CACHE_256KB 0x01 /* 256KB */ +#define L2CACHE_1MB 0x02 /* 1MB */ +#define L2CACHE_NONE 0x03 /* NONE */ +#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ + TODC_ALLOC(); -unsigned char ucSystemType; unsigned char ucBoardRev; unsigned char ucBoardRevMaj, ucBoardRevMin; @@ -89,9 +95,6 @@ extern void prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi #define cached_21 (((char *)(ppc_cached_irq_mask))[3]) #define cached_A1 (((char *)(ppc_cached_irq_mask))[2]) -/* for the mac fs */ -dev_t boot_dev; - #ifdef CONFIG_SOUND_CS4232 long ppc_cs4232_dma, ppc_cs4232_dma2; #endif @@ -173,7 +176,7 @@ prep_carolina_enable_l2(void) } /* cpuinfo code common to all IBM PReP */ -static void __prep +static void prep_ibm_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); @@ -209,14 +212,14 @@ prep_ibm_cpuinfo(struct seq_file *m) } } -static int __prep +static int prep_gen_cpuinfo(struct seq_file *m) { prep_ibm_cpuinfo(m); return 0; } -static int __prep +static int prep_sandalfoot_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); @@ -243,7 +246,7 @@ prep_sandalfoot_cpuinfo(struct seq_file *m) return 0; } -static int __prep +static int prep_thinkpad_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); @@ -314,7 +317,7 @@ prep_thinkpad_cpuinfo(struct seq_file *m) return 0; } -static int __prep +static int prep_carolina_cpuinfo(struct seq_file *m) { unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT); @@ -350,7 +353,7 @@ prep_carolina_cpuinfo(struct seq_file *m) return 0; } -static int __prep +static int prep_tiger1_cpuinfo(struct seq_file *m) { unsigned int l2_reg = inb(PREP_IBM_L2INFO); @@ -393,7 +396,7 @@ prep_tiger1_cpuinfo(struct seq_file *m) /* Used by all Motorola PReP */ -static int __prep +static int prep_mot_cpuinfo(struct seq_file *m) { unsigned int cachew = *((unsigned char *)CACHECRBA); @@ -454,7 +457,7 @@ no_l2: return 0; } -static void __prep +static void prep_restart(char *cmd) { #define PREP_SP92 0x92 /* Special Port 92 */ @@ -473,7 +476,7 @@ prep_restart(char *cmd) #undef PREP_SP92 } -static void __prep +static void prep_halt(void) { local_irq_disable(); /* no interrupts */ @@ -488,7 +491,7 @@ prep_halt(void) /* Carrera is the power manager in the Thinkpads. Unfortunately not much is * known about it, so we can't power down. */ -static void __prep +static void prep_carrera_poweroff(void) { prep_halt(); @@ -501,7 +504,7 @@ prep_carrera_poweroff(void) * somewhat in the IBM Carolina Technical Specification. * -Hollis */ -static void __prep +static void utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value) { /* @@ -539,7 +542,7 @@ utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value) udelay(100); /* important: let controller recover */ } -static void __prep +static void prep_sig750_poweroff(void) { /* tweak the power manager found in most IBM PRePs (except Thinkpads) */ @@ -554,7 +557,7 @@ prep_sig750_poweroff(void) /* not reached */ } -static int __prep +static int prep_show_percpuinfo(struct seq_file *m, int i) { /* PREP's without residual data will give incorrect values here */ @@ -700,12 +703,12 @@ prep_set_bat(void) /* * IBM 3-digit status LED */ -static unsigned int ibm_statusled_base __prepdata; +static unsigned int ibm_statusled_base; -static void __prep +static void ibm_statusled_progress(char *s, unsigned short hex); -static int __prep +static int ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2, void * dummy3) { @@ -713,13 +716,13 @@ ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2, return NOTIFY_DONE; } -static struct notifier_block ibm_statusled_block __prepdata = { +static struct notifier_block ibm_statusled_block = { ibm_statusled_panic, NULL, INT_MAX /* try to do it first */ }; -static void __prep +static void ibm_statusled_progress(char *s, unsigned short hex) { static int notifier_installed; @@ -733,7 +736,7 @@ ibm_statusled_progress(char *s, unsigned short hex) hex = 0xfff; if (!notifier_installed) { ++notifier_installed; - notifier_chain_register(&panic_notifier_list, + atomic_notifier_chain_register(&panic_notifier_list, &ibm_statusled_block); } } @@ -945,23 +948,9 @@ prep_calibrate_decr(void) todc_calibrate_decr(); } -static unsigned int __prep -prep_irq_canonicalize(u_int irq) -{ - if (irq == 2) - { - return 9; - } - else - { - return irq; - } -} - static void __init prep_init_IRQ(void) { - int i; unsigned int pci_viddid, pci_did; if (OpenPIC_Addr != NULL) { @@ -970,11 +959,9 @@ prep_init_IRQ(void) openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", i8259_irq); } - for ( i = 0 ; i < NUM_8259_INTERRUPTS ; i++ ) - irq_desc[i].handler = &i8259_pic; if (have_residual_data) { - i8259_init(residual_isapic_addr()); + i8259_init(residual_isapic_addr(), 0); return; } @@ -985,18 +972,18 @@ prep_init_IRQ(void) if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA) && ((pci_did == PCI_DEVICE_ID_MOTOROLA_RAVEN) || (pci_did == PCI_DEVICE_ID_MOTOROLA_HAWK))) - i8259_init(0); + i8259_init(0, 0); else /* PCI interrupt ack address given in section 6.1.8 of the * PReP specification. */ - i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR); + i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0); } #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) /* * IDE stuff. */ -static int __prep +static int prep_ide_default_irq(unsigned long base) { switch (base) { @@ -1010,7 +997,7 @@ prep_ide_default_irq(unsigned long base) } } -static unsigned long __prep +static unsigned long prep_ide_default_io_base(int index) { switch (index) { @@ -1055,7 +1042,7 @@ smp_prep_setup_cpu(int cpu_nr) do_openpic_setup_cpu(); } -static struct smp_ops_t prep_smp_ops __prepdata = { +static struct smp_ops_t prep_smp_ops = { smp_openpic_message_pass, smp_prep_probe, smp_prep_kick_cpu, @@ -1080,15 +1067,13 @@ prep_map_io(void) static int __init prep_request_io(void) { - if (_machine == _MACH_prep) { #ifdef CONFIG_NVRAM - request_region(PREP_NVRAM_AS0, 0x8, "nvram"); + request_region(PREP_NVRAM_AS0, 0x8, "nvram"); #endif - request_region(0x00,0x20,"dma1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xc0,0x20,"dma2"); - } + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); return 0; } @@ -1113,6 +1098,7 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5, ISA_DMA_THRESHOLD = 0x00ffffff; DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; + ppc_do_canonicalize_irqs = 1; /* figure out what kind of prep workstation we are */ if (have_residual_data) { @@ -1139,7 +1125,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.setup_arch = prep_setup_arch; ppc_md.show_percpuinfo = prep_show_percpuinfo; ppc_md.show_cpuinfo = NULL; /* set in prep_setup_arch() */ - ppc_md.irq_canonicalize = prep_irq_canonicalize; ppc_md.init_IRQ = prep_init_IRQ; /* this gets changed later on if we have an OpenPIC -- Cort */ ppc_md.get_irq = i8259_irq; @@ -1176,6 +1161,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_SMP - ppc_md.smp_ops = &prep_smp_ops; + smp_ops = &prep_smp_ops; #endif /* CONFIG_SMP */ }