X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fsh%2Fdrivers%2Fpci%2Fops-bigsur.c;h=eb31be751524ee3f6b79aca1836224db1c127e67;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=9b43da67804b1da041abc2ad06fa0dc830b886e4;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c
index 9b43da678..eb31be751 100644
--- a/arch/sh/drivers/pci/ops-bigsur.c
+++ b/arch/sh/drivers/pci/ops-bigsur.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/sh/kernel/pci-bigsur.c
+ * linux/arch/sh/drivers/pci/ops-bigsur.c
  *
  * By Dustin McIntire (dustin@sensoria.com) (c)2001
  *
@@ -10,16 +10,12 @@
  *
  * PCI initialization for the Hitachi Big Sur Evaluation Board
  */
-
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/pci.h>
-
 #include <asm/io.h>
-#include "pci-sh7751.h"
+#include "pci-sh4.h"
 #include <asm/bigsur/bigsur.h>
 
 #define BIGSUR_PCI_IO	0x4000
@@ -42,11 +38,11 @@ static struct resource sh7751_mem_resource = {
 extern struct pci_ops sh7751_pci_ops;
 
 struct pci_channel board_pci_channels[] = {
-	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
 	{ 0, }
 };
 
-static struct sh7751_pci_address_map sh7751_pci_map = {
+static struct sh4_pci_address_map sh7751_pci_map = {
 	.window0	= {
 		.base	= SH7751_CS3_BASE_ADDR,
 		.size	= BIGSUR_LSR0_SIZE,
@@ -59,7 +55,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
 };
 
 /*
- * Initialize the Big Sur PCI interface 
+ * Initialize the Big Sur PCI interface
  * Setup hardware to be Central Funtion
  * Copy the BSR regs to the PCI interface
  * Setup PCI windows into local RAM
@@ -69,15 +65,15 @@ int __init pcibios_init_platform(void)
 	return sh7751_pcic_init(&sh7751_pci_map);
 }
 
-int pcibios_map_platform_irq(u8 slot, u8 pin)
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
-	/* 
+	/*
 	 * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI
 	 * interface is on the wrong end of the board so that it can also
 	 * support a V320 CPI interface chip...  Therefor the IRQ mapping is
 	 * somewhat use dependent... I'l assume a linear map for now, i.e.
 	 * INTA=slot0,pin0... INTD=slot3,pin0...
-	 */ 
+	 */
 	int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE;
 
 	PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n",
@@ -85,4 +81,3 @@ int pcibios_map_platform_irq(u8 slot, u8 pin)
 
 	return irq;
 }
-