X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fsparc64%2Fkernel%2Fhead.S;h=baea10a9819681cb409d1ae205ec36a468d3c4aa;hb=refs%2Fheads%2Fvserver;hp=b49dcd4504b029e1684730a554fe5cd0684dc92b;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index b49dcd450..baea10a98 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -7,9 +7,9 @@ * Copyright (C) 1997 Miguel de Icaza (miguel@nuclecu.unam.mx) */ -#include #include #include +#include #include #include #include @@ -26,6 +26,7 @@ #include #include #include +#include /* This section from from _start to sparc64_boot_end should fit into * 0x0000000000404000 to 0x0000000000408000. @@ -77,11 +78,7 @@ sparc_ramdisk_image64: /* PROM cif handler code address is in %o4. */ sparc64_boot: -1: rd %pc, %g7 - set 1b, %g1 - cmp %g1, %g7 - be,pn %xcc, sparc64_boot_after_remap - mov %o4, %l7 + mov %o4, %l7 /* We need to remap the kernel. Use position independant * code to remap us to KERNBASE. @@ -94,12 +91,17 @@ sparc64_boot: wrpr %g1, 0x0, %pstate ba,a,pt %xcc, 1f - .globl prom_finddev_name, prom_chosen_path - .globl prom_getprop_name, prom_mmu_name - .globl prom_callmethod_name, prom_translate_name + .globl prom_finddev_name, prom_chosen_path, prom_root_node + .globl prom_getprop_name, prom_mmu_name, prom_peer_name + .globl prom_callmethod_name, prom_translate_name, prom_root_compatible .globl prom_map_name, prom_unmap_name, prom_mmu_ihandle_cache .globl prom_boot_mapped_pc, prom_boot_mapping_mode .globl prom_boot_mapping_phys_high, prom_boot_mapping_phys_low + .globl is_sun4v +prom_peer_name: + .asciz "peer" +prom_compatible_name: + .asciz "compatible" prom_finddev_name: .asciz "finddevice" prom_chosen_path: @@ -116,7 +118,13 @@ prom_map_name: .asciz "map" prom_unmap_name: .asciz "unmap" +prom_sun4v_name: + .asciz "sun4v" .align 4 +prom_root_compatible: + .skip 64 +prom_root_node: + .word 0 prom_mmu_ihandle_cache: .word 0 prom_boot_mapped_pc: @@ -128,8 +136,54 @@ prom_boot_mapping_phys_high: .xword 0 prom_boot_mapping_phys_low: .xword 0 +is_sun4v: + .word 0 1: rd %pc, %l0 + + mov (1b - prom_peer_name), %l1 + sub %l0, %l1, %l1 + mov 0, %l2 + + /* prom_root_node = prom_peer(0) */ + stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "peer" + mov 1, %l3 + stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 1 + stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1 + stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1, 0 + stx %g0, [%sp + 2047 + 128 + 0x20] ! ret1 + call %l7 + add %sp, (2047 + 128), %o0 ! argument array + + ldx [%sp + 2047 + 128 + 0x20], %l4 ! prom root node + mov (1b - prom_root_node), %l1 + sub %l0, %l1, %l1 + stw %l4, [%l1] + + mov (1b - prom_getprop_name), %l1 + mov (1b - prom_compatible_name), %l2 + mov (1b - prom_root_compatible), %l5 + sub %l0, %l1, %l1 + sub %l0, %l2, %l2 + sub %l0, %l5, %l5 + + /* prom_getproperty(prom_root_node, "compatible", + * &prom_root_compatible, 64) + */ + stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "getprop" + mov 4, %l3 + stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 4 + mov 1, %l3 + stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1 + stx %l4, [%sp + 2047 + 128 + 0x18] ! arg1, prom_root_node + stx %l2, [%sp + 2047 + 128 + 0x20] ! arg2, "compatible" + stx %l5, [%sp + 2047 + 128 + 0x28] ! arg3, &prom_root_compatible + mov 64, %l3 + stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4, size + stx %g0, [%sp + 2047 + 128 + 0x38] ! ret1 + call %l7 + add %sp, (2047 + 128), %o0 ! argument array + mov (1b - prom_finddev_name), %l1 mov (1b - prom_chosen_path), %l2 mov (1b - prom_boot_mapped_pc), %l3 @@ -237,7 +291,27 @@ prom_boot_mapping_phys_low: add %sp, (192 + 128), %sp -sparc64_boot_after_remap: + sethi %hi(prom_root_compatible), %g1 + or %g1, %lo(prom_root_compatible), %g1 + sethi %hi(prom_sun4v_name), %g7 + or %g7, %lo(prom_sun4v_name), %g7 + mov 5, %g3 +1: ldub [%g7], %g2 + ldub [%g1], %g4 + cmp %g2, %g4 + bne,pn %icc, 2f + add %g7, 1, %g7 + subcc %g3, 1, %g3 + bne,pt %xcc, 1b + add %g1, 1, %g1 + + sethi %hi(is_sun4v), %g1 + or %g1, %lo(is_sun4v), %g1 + mov 1, %g7 + stw %g7, [%g1] + +2: + BRANCH_IF_SUN4V(g1, jump_to_sun4u_init) BRANCH_IF_CHEETAH_BASE(g1,g7,cheetah_boot) BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,cheetah_plus_boot) ba,pt %xcc, spitfire_boot @@ -301,20 +375,58 @@ jump_to_sun4u_init: nop sun4u_init: + BRANCH_IF_SUN4V(g1, sun4v_init) + /* Set ctx 0 */ - mov PRIMARY_CONTEXT, %g7 - stxa %g0, [%g7] ASI_DMMU - membar #Sync + mov PRIMARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_DMMU + membar #Sync - mov SECONDARY_CONTEXT, %g7 - stxa %g0, [%g7] ASI_DMMU + mov SECONDARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_DMMU membar #Sync - BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup) + ba,pt %xcc, sun4u_continue + nop + +sun4v_init: + /* Set ctx 0 */ + mov PRIMARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_MMU + membar #Sync + + mov SECONDARY_CONTEXT, %g7 + stxa %g0, [%g7] ASI_MMU + membar #Sync + ba,pt %xcc, niagara_tlb_fixup + nop + +sun4u_continue: + BRANCH_IF_ANY_CHEETAH(g1, g7, cheetah_tlb_fixup) ba,pt %xcc, spitfire_tlb_fixup nop +niagara_tlb_fixup: + mov 3, %g2 /* Set TLB type to hypervisor. */ + sethi %hi(tlb_type), %g1 + stw %g2, [%g1 + %lo(tlb_type)] + + /* Patch copy/clear ops. */ + call niagara_patch_copyops + nop + call niagara_patch_bzero + nop + call niagara_patch_pageops + nop + + /* Patch TLB/cache ops. */ + call hypervisor_patch_cachetlbops + nop + + ba,pt %xcc, tlb_fixup_done + nop + cheetah_tlb_fixup: mov 2, %g2 /* Set TLB type to cheetah+. */ BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f) @@ -372,10 +484,47 @@ tlb_fixup_done: call __bzero sub %o1, %o0, %o1 +#ifdef CONFIG_LOCKDEP + /* We have this call this super early, as even prom_init can grab + * spinlocks and thus call into the lockdep code. + */ + call lockdep_init + nop +#endif + mov %l6, %o1 ! OpenPROM stack call prom_init mov %l7, %o0 ! OpenPROM cif handler + /* Initialize current_thread_info()->cpu as early as possible. + * In order to do that accurately we have to patch up the get_cpuid() + * assembler sequences. And that, in turn, requires that we know + * if we are on a Starfire box or not. While we're here, patch up + * the sun4v sequences as well. + */ + call check_if_starfire + nop + call per_cpu_patch + nop + call sun4v_patch + nop + +#ifdef CONFIG_SMP + call hard_smp_processor_id + nop + cmp %o0, NR_CPUS + blu,pt %xcc, 1f + nop + call boot_cpu_id_too_large + nop + /* Not reached... */ + +1: +#else + mov 0, %o0 +#endif + stb %o0, [%g6 + TI_CPU] + /* Off we go.... */ call start_kernel nop @@ -405,91 +554,62 @@ setup_trap_table: save %sp, -192, %sp /* Force interrupts to be disabled. */ - rdpr %pstate, %o1 - andn %o1, PSTATE_IE, %o1 + rdpr %pstate, %l0 + andn %l0, PSTATE_IE, %o1 wrpr %o1, 0x0, %pstate + rdpr %pil, %l1 wrpr %g0, 15, %pil /* Make the firmware call to jump over to the Linux trap table. */ - call prom_set_trap_table - sethi %hi(sparc64_ttable_tl0), %o0 + sethi %hi(is_sun4v), %o0 + lduw [%o0 + %lo(is_sun4v)], %o0 + brz,pt %o0, 1f + nop - /* Start using proper page size encodings in ctx register. */ - sethi %hi(sparc64_kern_pri_context), %g3 - ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 - mov PRIMARY_CONTEXT, %g1 - stxa %g2, [%g1] ASI_DMMU - membar #Sync + TRAP_LOAD_TRAP_BLOCK(%g2, %g3) + add %g2, TRAP_PER_CPU_FAULT_INFO, %g2 + stxa %g2, [%g0] ASI_SCRATCHPAD - /* The Linux trap handlers expect various trap global registers - * to be setup with some fixed values. So here we set these - * up very carefully. These globals are: - * - * Alternate Globals (PSTATE_AG): - * - * %g6 --> current_thread_info() - * - * MMU Globals (PSTATE_MG): - * - * %g1 --> TLB_SFSR - * %g2 --> ((_PAGE_VALID | _PAGE_SZ4MB | - * _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - * ^ 0xfffff80000000000) - * (this %g2 value is used for computing the PAGE_OFFSET kernel - * TLB entries quickly, the virtual address of the fault XOR'd - * with this %g2 value is the PTE to load into the TLB) - * %g3 --> VPTE_BASE_CHEETAH or VPTE_BASE_SPITFIRE - * - * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()): + /* Compute physical address: * - * %g6 --> __irq_work[smp_processor_id()] + * paddr = kern_base + (mmfsa_vaddr - KERNBASE) */ + sethi %hi(KERNBASE), %g3 + sub %g2, %g3, %g2 + sethi %hi(kern_base), %g3 + ldx [%g3 + %lo(kern_base)], %g3 + add %g2, %g3, %o1 - rdpr %pstate, %o1 - mov %g6, %o2 - wrpr %o1, PSTATE_AG, %pstate - mov %o2, %g6 + call prom_set_trap_table_sun4v + sethi %hi(sparc64_ttable_tl0), %o0 -#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000) -#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - wrpr %o1, PSTATE_MG, %pstate - mov TSB_REG, %g1 - stxa %g0, [%g1] ASI_DMMU - membar #Sync - stxa %g0, [%g1] ASI_IMMU - membar #Sync - mov TLB_SFSR, %g1 - sethi %uhi(KERN_HIGHBITS), %g2 - or %g2, %ulo(KERN_HIGHBITS), %g2 - sllx %g2, 32, %g2 - or %g2, KERN_LOWBITS, %g2 - - BRANCH_IF_ANY_CHEETAH(g3,g7,8f) - ba,pt %xcc, 9f + ba,pt %xcc, 2f nop -8: - sethi %uhi(VPTE_BASE_CHEETAH), %g3 - or %g3, %ulo(VPTE_BASE_CHEETAH), %g3 - ba,pt %xcc, 2f - sllx %g3, 32, %g3 +1: call prom_set_trap_table + sethi %hi(sparc64_ttable_tl0), %o0 -9: - sethi %uhi(VPTE_BASE_SPITFIRE), %g3 - or %g3, %ulo(VPTE_BASE_SPITFIRE), %g3 - sllx %g3, 32, %g3 + /* Start using proper page size encodings in ctx register. */ +2: sethi %hi(sparc64_kern_pri_context), %g3 + ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 -2: - clr %g7 -#undef KERN_HIGHBITS -#undef KERN_LOWBITS + mov PRIMARY_CONTEXT, %g1 + +661: stxa %g2, [%g1] ASI_DMMU + .section .sun4v_1insn_patch, "ax" + .word 661b + stxa %g2, [%g1] ASI_MMU + .previous + + membar #Sync /* Kill PROM timer */ sethi %hi(0x80000000), %o2 sllx %o2, 32, %o2 wr %o2, 0, %tick_cmpr - BRANCH_IF_ANY_CHEETAH(o2,o3,1f) + BRANCH_IF_SUN4V(o2, 1f) + BRANCH_IF_ANY_CHEETAH(o2, o3, 1f) ba,pt %xcc, 2f nop @@ -502,22 +622,19 @@ setup_trap_table: 2: wrpr %g0, %g0, %wstate - wrpr %o1, 0x0, %pstate call init_irqwork_curcpu nop - /* Now we can turn interrupts back on. */ - rdpr %pstate, %o1 - or %o1, PSTATE_IE, %o1 - wrpr %o1, 0, %pstate - wrpr %g0, 0x0, %pil + /* Now we can restore interrupt state. */ + wrpr %l0, 0, %pstate + wrpr %l1, 0x0, %pil ret restore .globl setup_tba -setup_tba: /* i0 = is_starfire */ +setup_tba: save %sp, -192, %sp /* The boot processor is the only cpu which invokes this @@ -536,31 +653,35 @@ setup_tba: /* i0 = is_starfire */ restore sparc64_boot_end: -#include "systbls.S" #include "ktlb.S" +#include "tsb.S" #include "etrap.S" #include "rtrap.S" #include "winfixup.S" #include "entry.S" +#include "sun4v_tlb_miss.S" +#include "sun4v_ivec.S" /* * The following skip makes sure the trap table in ttable.S is aligned * on a 32K boundary as required by the v9 specs for TBA register. + * + * We align to a 32K boundary, then we have the 32K kernel TSB, + * then the 32K aligned trap table. */ 1: .skip 0x4000 + _start - 1b -#ifdef CONFIG_SBUS -/* This is just a hack to fool make depend config.h discovering - strategy: As the .S files below need config.h, but - make depend does not find it for them, we include config.h - in head.S */ -#endif + .globl swapper_tsb +swapper_tsb: + .skip (32 * 1024) ! 0x0000000000408000 #include "ttable.S" +#include "systbls.S" + .data .align 8 .globl prom_tba, tlb_type