X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fv850%2Fkernel%2Fas85ep1.c;h=5352f8a5aa070191f9d0d027a0ac7bc420b10cb9;hb=refs%2Fheads%2Fvserver;hp=ccdb7fd23c6128e550bc1ea4bd58c4d8f1cce98c;hpb=5273a3df6485dc2ad6aa7ddd441b9a21970f003b;p=linux-2.6.git

diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
index ccdb7fd23..5352f8a5a 100644
--- a/arch/v850/kernel/as85ep1.c
+++ b/arch/v850/kernel/as85ep1.c
@@ -11,7 +11,6 @@
  * Written by Miles Bader <miles@gnu.org>
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -57,10 +56,10 @@ void __init mach_early_init (void)
 	AS85EP1_ASC    = 0;
 	AS85EP1_LBS    = 0x00A9;
 
-	AS85EP1_PORT_PMC(6)  = 0xFF; /* A20-25, A0,A1 有効 */
-	AS85EP1_PORT_PMC(7)  = 0x0E; /* CS1,2,3       有効 */
-	AS85EP1_PORT_PMC(9)  = 0xFF; /* D16-23        有効 */
-	AS85EP1_PORT_PMC(10) = 0xFF; /* D24-31        有効 */
+	AS85EP1_PORT_PMC(6)  = 0xFF; /* valid A0,A1,A20-A25 */
+	AS85EP1_PORT_PMC(7)  = 0x0E; /* valid CS1-CS3       */
+	AS85EP1_PORT_PMC(9)  = 0xFF; /* valid D16-D23       */
+	AS85EP1_PORT_PMC(10) = 0xFF; /* valid D24-D31       */
 
 	AS85EP1_RFS(1) = 0x800c;
 	AS85EP1_RFS(3) = 0x800c;
@@ -76,7 +75,7 @@ void __init mach_early_init (void)
 	   write to address (N - 0x10).  We avoid this (effectively) by
 	   writing in 16-byte chunks backwards from the end.  */
 
-	AS85EP1_IRAMM = 0x3;	/* 内蔵命令RAMは「write-mode」になります */
+	AS85EP1_IRAMM = 0x3;	/* "write-mode" for the internal instruction memory */
 
 	src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
 	dst = (u32 *)&_intv_copy_dst_start
@@ -88,7 +87,7 @@ void __init mach_early_init (void)
 		src -= 4;
 	} while (src > (u32 *)&_intv_copy_src_start);
 
-	AS85EP1_IRAMM = 0x0;	/* 内蔵命令RAMは「read-mode」になります */
+	AS85EP1_IRAMM = 0x0;	/* "read-mode" for the internal instruction memory */
 #endif /* !CONFIG_ROM_KERNEL */
 
 	v850e_intc_disable_irqs ();
@@ -160,8 +159,6 @@ void machine_restart (char *__unused)
 	asm ("jmp r0"); /* Jump to the reset vector.  */
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void machine_halt (void)
 {
 #ifdef CONFIG_RESET_GUARD
@@ -173,15 +170,11 @@ void machine_halt (void)
 		asm ("halt; nop; nop; nop; nop; nop");
 }
 
-EXPORT_SYMBOL(machine_halt);
-
 void machine_power_off (void)
 {
 	machine_halt ();
 }
 
-EXPORT_SYMBOL(machine_power_off);
-
 /* Called before configuring an on-chip UART.  */
 void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
 {