X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fx86_64%2FKconfig;h=0d916b2ef1747d43a35f746238e7515f8b29e4a9;hb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;hp=4268bee19c68e64654d250a5f16e54aa5acd59a8;hpb=f7f1b0f1e2fbadeab12d24236000e778aa9b1ead;p=linux-2.6.git diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 4268bee19..0d916b2ef 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -24,6 +24,19 @@ config X86 bool default y +config LOCKDEP_SUPPORT + bool + default y + +config STACKTRACE_SUPPORT + bool + depends on !X86_64_XEN + default y + +config SEMAPHORE_SLEEPERS + bool + default y + config MMU bool default y @@ -41,6 +54,10 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -61,11 +78,41 @@ config GENERIC_IOMAP bool default y +config ARCH_MAY_HAVE_PC_FDC + bool + default y + +config DMI + bool + default y + +config AUDIT_ARCH + bool + default y + source "init/Kconfig" menu "Processor type and features" +choice + prompt "Subarchitecture Type" + default X86_PC + +config X86_PC + bool "PC-compatible" + help + Choose this option if your computer is a standard PC or compatible. + +config X86_VSMP + bool "Support for ScaleMP vSMP" + help + Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is + supposed to run on these EM64T-based machines. Only choose this option + if you have one of these machines. + +endchoice + choice prompt "Processor family" default MK8 @@ -89,6 +136,22 @@ config GENERIC_CPU endchoice +config X86_64_XEN + bool "Enable Xen compatible kernel" + select SWIOTLB + help + This option will compile a kernel compatible with Xen hypervisor + +config X86_NO_TSS + bool + depends on X86_64_XEN + default y + +config X86_NO_IDT + bool + depends on X86_64_XEN + default y + # # Define implied options from the CPU selection here # @@ -102,8 +165,14 @@ config X86_L1_CACHE_SHIFT default "7" if GENERIC_CPU || MPSC default "6" if MK8 +config X86_INTERNODE_CACHE_BYTES + int + default "4096" if X86_VSMP + default X86_L1_CACHE_BYTES if !X86_VSMP + config X86_TSC bool + depends on !X86_64_XEN default y config X86_GOOD_APIC @@ -144,10 +213,9 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -# disable it for opteron optimized builds because it pulls in ACPI_BOOT config X86_HT bool - depends on SMP && !MK8 + depends on SMP && !MK8 && !X86_64_XEN default y config MATH_EMULATION @@ -161,14 +229,22 @@ config EISA config X86_IO_APIC bool + depends !XEN_UNPRIVILEGED_GUEST default y +config X86_XEN_GENAPIC + bool + depends X86_64_XEN + default XEN_PRIVILEGED_GUEST || SMP + config X86_LOCAL_APIC bool + depends !XEN_UNPRIVILEGED_GUEST default y config MTRR bool "MTRR (Memory Type Range Register) support" + depends on !XEN_UNPRIVILEGED_GUEST ---help--- On Intel P6 family processors (Pentium Pro, Pentium II and later) the Memory Type Range Registers (MTRRs) may be used to control @@ -207,36 +283,9 @@ config SMP If you don't know what to do here, say N. -config PREEMPT - bool "Preemptible Kernel" - ---help--- - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. On contrary it may also break your drivers and add - priority inheritance problems to your system. Don't select it if - you rely on a stable system or have slightly obscure hardware. - It's also not very well tested on x86-64 currently. - You have been warned. - - Say Y here if you are feeling brave and building a kernel for a - desktop, embedded or real-time system. Say N if you are unsure. - -config PREEMPT_BKL - bool "Preempt The Big Kernel Lock" - depends on PREEMPT - default y - help - This option reduces the latency of the kernel by making the - big kernel lock preemptible. - - Say Y here if you are building a kernel for a desktop system. - Say N if you are unsure. - config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" - depends on SMP + depends on SMP && !X86_64_XEN default n help SMT scheduler support improves the CPU scheduler's decision making @@ -244,45 +293,105 @@ config SCHED_SMT cost of slightly increased overhead in some places. If unsure say N here. +config SCHED_MC + bool "Multi-core scheduler support" + depends on SMP && !X86_64_XEN + default y + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +source "kernel/Kconfig.preempt" + +config NUMA + bool "Non Uniform Memory Access (NUMA) Support" + depends on SMP && !X86_64_XEN + help + Enable NUMA (Non Uniform Memory Access) support. The kernel + will try to allocate memory used by a CPU on the local memory + controller of the CPU and add some more NUMA awareness to the kernel. + This code is recommended on all multiprocessor Opteron systems. + If the system is EM64T, you should say N unless your system is EM64T + NUMA. + config K8_NUMA - bool "K8 NUMA support" - select NUMA - depends on SMP + bool "Old style AMD Opteron NUMA detection" + depends on NUMA + default y + help + Enable K8 NUMA node topology detection. You should say Y here if + you have a multi processor AMD K8 system. This uses an old + method to read the NUMA configurtion directly from the builtin + Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA + instead, which also takes priority if both are compiled in. + +config NODES_SHIFT + int + default "6" + depends on NEED_MULTIPLE_NODES + +# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig. + +config X86_64_ACPI_NUMA + bool "ACPI NUMA detection" + depends on NUMA + select ACPI + select PCI + select ACPI_NUMA + default y help - Enable NUMA (Non Unified Memory Architecture) support for - AMD Opteron Multiprocessor systems. The kernel will try to allocate - memory used by a CPU on the local memory controller of the CPU - and add some more NUMA awareness to the kernel. - This code is recommended on all multiprocessor Opteron systems - and normally doesn't hurt on others. + Enable ACPI SRAT based node topology detection. config NUMA_EMU - bool "NUMA emulation support" - select NUMA - depends on SMP + bool "NUMA emulation" + depends on NUMA help Enable NUMA emulation. A flat machine will be split into virtual nodes when booted with "numa=fake=N", where N is the number of nodes. This is only useful for debugging. -config DISCONTIGMEM +config ARCH_DISCONTIGMEM_ENABLE bool depends on NUMA default y -config NUMA - bool - default n -config HAVE_DEC_LOCK - bool - depends on SMP - default y +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + depends on NUMA + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + depends on NUMA + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on (NUMA || EXPERIMENTAL) && !X86_64_XEN + +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + +config ARCH_FLATMEM_ENABLE + def_bool y + depends on !NUMA + +source "mm/Kconfig" + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool y + depends on NUMA + +config OUT_OF_LINE_PFN_TO_PAGE + def_bool y + depends on DISCONTIGMEM config NR_CPUS int "Maximum number of CPUs (2-256)" - range 2 256 + range 2 255 depends on SMP + default "16" if X86_64_XEN default "8" help This allows you to specify the maximum number of CPUs which this @@ -292,8 +401,20 @@ config NR_CPUS This is purely to save memory - each supported CPU requires memory in the static kernel configuration. +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + depends on SMP && HOTPLUG && EXPERIMENTAL + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu/cpu#. + Say N if you want to disable CPU hotplug. + +config ARCH_ENABLE_MEMORY_HOTPLUG + def_bool y + config HPET_TIMER bool + depends on !X86_64_XEN default y help Use the IA-PC HPET (High Precision Event Timer) to manage @@ -301,54 +422,57 @@ config HPET_TIMER present. The HPET provides a stable time base on SMP systems, unlike the TSC, but it is more expensive to access, as it is off-chip. You can find the HPET spec at - . - -config X86_PM_TIMER - bool "PM timer" - depends on ACPI - default y - help - Support the ACPI PM timer for time keeping. This is slow, - but is useful on some chipsets without HPET on systems with more - than one CPU. On a single processor or single socket multi core - system it is normally not required. - When the PM timer is active 64bit vsyscalls are disabled - and should not be enabled (/proc/sys/kernel/vsyscall64 should - not be changed). - The kernel selects the PM timer only as a last resort, so it is - useful to enable just in case. + . config HPET_EMULATE_RTC bool "Provide RTC interrupt" depends on HPET_TIMER && RTC=y -config GART_IOMMU - bool "IOMMU support" - depends on PCI +# Mark as embedded because too many people got it wrong. +# The code disables itself when not needed. +config IOMMU + bool "IOMMU support" if EMBEDDED + default y + select SWIOTLB + select AGP + depends on PCI && !X86_64_XEN help - Support the K8 IOMMU. Needed to run systems with more than 4GB of memory - properly with 32-bit PCI devices that do not support DAC (Double Address - Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter. - Normally the kernel will take the right choice by itself. + Support for full DMA access of devices with 32bit memory access only + on systems with more than 3GB. This is usually needed for USB, + sound, many IDE/SATA chipsets and some other devices. + Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART + based IOMMU and a software bounce buffer based IOMMU used on Intel + systems and as fallback. + The code is only active when needed (enough memory and limited + device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified + too. + +config CALGARY_IOMMU + bool "IBM Calgary IOMMU support" + default y + select SWIOTLB + depends on PCI && EXPERIMENTAL + help + Support for hardware IOMMUs in IBM's xSeries x366 and x460 + systems. Needed to run systems with more than 3GB of memory + properly with 32-bit PCI devices that do not support DAC + (Double Address Cycle). Calgary also supports bus level + isolation, where all DMAs pass through the IOMMU. This + prevents them from going anywhere except their intended + destination. This catches hard-to-find kernel bugs and + mis-behaving drivers and devices that do not use the DMA-API + properly to set up their DMA buffers. The IOMMU can be + turned off at boot time with the iommu=off parameter. + Normally the kernel will make the right choice by itself. If unsure, say Y. -# need this always enabled with GART_IOMMU for the VIA workaround +# need this always selected by IOMMU for the VIA workaround config SWIOTLB - bool - depends on GART_IOMMU - default y - -config DUMMY_IOMMU bool - depends on !GART_IOMMU && !SWIOTLB - default y - help - Don't use IOMMU code. This will cause problems when you have more than 4GB - of memory and any 32-bit devices. Don't turn on unless you know what you - are doing. config X86_MCE bool "Machine check support" if EMBEDDED + depends on !X86_64_XEN default y help Include a machine check error handler to report hardware errors. @@ -364,6 +488,56 @@ config X86_MCE_INTEL Additional support for intel specific MCE features such as the thermal monitor. +config X86_MCE_AMD + bool "AMD MCE features" + depends on X86_MCE && X86_LOCAL_APIC + default y + help + Additional support for AMD specific MCE features such as + the DRAM Error Threshold. + +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL && !X86_64_XEN + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + +config CRASH_DUMP + bool "kernel crash dumps (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + Generate crash dump after being started by kexec. + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) + default "0x1000000" if CRASH_DUMP + default "0x200000" + help + This gives the physical address where the kernel is loaded. Normally + for regular kernels this value is 0x200000 (2MB). But in the case + of kexec on panic the fail safe kernel needs to run at a different + address than the panic-ed kernel. This option is used to set the load + address for kernels used to capture crash dump on being kexec'ed + after panic. The default value for crash dump kernels is + 0x1000000 (16MB). This can also be set based on the "X" value as + specified in the "crashkernel=YM@XM" command line boot parameter + passed to the panic-ed kernel. Typically this parameter is set as + crashkernel=64M@16M. Please take a look at + Documentation/kdump/kdump.txt for more details about crash dumps. + + Don't change this unless you know what you are doing. + config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS @@ -381,6 +555,20 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +source kernel/Kconfig.hz + +config REORDER + bool "Function reordering" + default n + help + This option enables the toolchain to reorder functions for a more + optimal TLB usage. If you have pretty much any version of binutils, + this can increase your kernel build time by roughly one minute. + +config K8_NB + def_bool y + depends on AGP_AMD64 || IOMMU || (PCI && NUMA) + endmenu # @@ -399,9 +587,17 @@ config ISA_DMA_API bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + menu "Power management options" + depends on !XEN_UNPRIVILEGED_GUEST +if !X86_64_XEN source kernel/power/Kconfig +endif source "drivers/acpi/Kconfig" @@ -423,17 +619,21 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" depends on PCI && ACPI - select ACPI_BOOT -config UNORDERED_IO - bool "Unordered IO mapping access" - depends on EXPERIMENTAL - help - Use unordered stores to access IO memory mappings in device drivers. - Still very experimental. When a driver works on IA64/ppc64/pa-risc it should - work with this option, but it makes the drivers behave differently - from i386. Requires that the driver writer used memory barriers - properly. +config XEN_PCIDEV_FRONTEND + bool "Xen PCI Frontend" + depends on PCI && X86_64_XEN + default y + help + The PCI device frontend driver allows the kernel to import arbitrary + PCI devices from a PCI backend to support PCI driver domains. + +config XEN_PCIDEV_FE_DEBUG + bool "Xen PCI Frontend Debugging" + depends on XEN_PCIDEV_FRONTEND + default n + help + Enables some debug statements within the PCI Frontend. source "drivers/pci/pcie/Kconfig" @@ -458,7 +658,7 @@ config IA32_EMULATION left. config IA32_AOUT - bool "IA32 a.out support" + tristate "IA32 a.out support" depends on IA32_EMULATION help Support old a.out binaries in the 32bit emulation. @@ -473,21 +673,32 @@ config SYSVIPC_COMPAT depends on COMPAT && SYSVIPC default y -config UID16 - bool - depends on IA32_EMULATION - default y - endmenu +source "net/Kconfig" + source drivers/Kconfig source "drivers/firmware/Kconfig" source fs/Kconfig +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/x86_64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/x86_64/Kconfig.debug" source "kernel/vserver/Kconfig" @@ -496,4 +707,6 @@ source "security/Kconfig" source "crypto/Kconfig" +source "drivers/xen/Kconfig" + source "lib/Kconfig"