X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fx86_64%2Fkernel%2Fi8259.c;h=d73c79e821f172ee3efe48f490e97b947bb8c153;hb=refs%2Fheads%2Fvserver;hp=5ecd34ab8c2bba9ae70d15ff9803ead2957c72d9;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c
index 5ecd34ab8..d73c79e82 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86_64/kernel/i8259.c
@@ -1,5 +1,4 @@
 #include <linux/linkage.h>
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -44,19 +43,11 @@
 	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
 	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
 
-#define BUILD_14_IRQS(x) \
-	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
-	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
-	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
-	BI(x,c) BI(x,d)
-
 /*
  * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
  * (these are usually mapped to vectors 0x20-0x2f)
  */
-BUILD_16_IRQS(0x0)
 
-#ifdef CONFIG_X86_LOCAL_APIC
 /*
  * The IO-APIC gives us many more interrupt sources. Most of these 
  * are unused but an SMP system is supposed to have enough memory ...
@@ -67,19 +58,12 @@ BUILD_16_IRQS(0x0)
  *
  * (these are usually mapped into the 0x30-0xff vector range)
  */
-		   BUILD_16_IRQS(0x1) BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
+				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
 BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
 BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd)
-
-#ifdef CONFIG_PCI_MSI
-	BUILD_14_IRQS(0xe)
-#endif
-
-#endif
+BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
 
 #undef BUILD_16_IRQS
-#undef BUILD_14_IRQS
 #undef BI
 
 
@@ -92,31 +76,16 @@ BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd)
 	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
 	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
 
-#define IRQLIST_14(x) \
-	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
-	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
-	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
-	IRQ(x,c), IRQ(x,d)
-
-void (*interrupt[NR_IRQS])(void) = {
-	IRQLIST_16(0x0),
-
-#ifdef CONFIG_X86_IO_APIC
-			 IRQLIST_16(0x1), IRQLIST_16(0x2), IRQLIST_16(0x3),
+/* for the irq vectors */
+static void (*interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
+					  IRQLIST_16(0x2), IRQLIST_16(0x3),
 	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
 	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
-	IRQLIST_16(0xc), IRQLIST_16(0xd)
-
-#ifdef CONFIG_PCI_MSI
-	, IRQLIST_14(0xe)
-#endif
-
-#endif
+	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
 };
 
 #undef IRQ
 #undef IRQLIST_16
-#undef IRQLIST_14
 
 /*
  * This is the 'legacy' 8259A Programmable Interrupt Controller,
@@ -127,40 +96,15 @@ void (*interrupt[NR_IRQS])(void) = {
  * moves to arch independent land
  */
 
+static int i8259A_auto_eoi;
 DEFINE_SPINLOCK(i8259A_lock);
-
-static void end_8259A_irq (unsigned int irq)
-{
-	if (irq > 256) { 
-		char var;
-		printk("return %p stack %p ti %p\n", __builtin_return_address(0), &var, task_thread_info(current));
-
-		BUG(); 
-	}
-
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) &&
-	    irq_desc[irq].action)
-		enable_8259A_irq(irq);
-}
-
-#define shutdown_8259A_irq	disable_8259A_irq
-
 static void mask_and_ack_8259A(unsigned int);
 
-static unsigned int startup_8259A_irq(unsigned int irq)
-{ 
-	enable_8259A_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type i8259A_irq_type = {
-	.typename = "XT-PIC",
-	.startup = startup_8259A_irq,
-	.shutdown = shutdown_8259A_irq,
-	.enable = enable_8259A_irq,
-	.disable = disable_8259A_irq,
-	.ack = mask_and_ack_8259A,
-	.end = end_8259A_irq,
+static struct irq_chip i8259A_chip = {
+	.name		= "XT-PIC",
+	.mask		= disable_8259A_irq,
+	.unmask		= enable_8259A_irq,
+	.mask_ack	= mask_and_ack_8259A,
 };
 
 /*
@@ -235,7 +179,8 @@ void make_8259A_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
 	io_apic_irqs &= ~(1<<irq);
-	irq_desc[irq].handler = &i8259A_irq_type;
+	set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
+				      "XT");
 	enable_irq(irq);
 }
 
@@ -278,7 +223,7 @@ static void mask_and_ack_8259A(unsigned int irq)
 	 * Lightweight spurious IRQ detection. We do not want
 	 * to overdo spurious IRQ handling - it's usually a sign
 	 * of hardware problems, so we only do the checks we can
-	 * do without slowing down good hardware unnecesserily.
+	 * do without slowing down good hardware unnecessarily.
 	 *
 	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
 	 * usually resulting from the 8259A-1|2 PICs) occur
@@ -342,6 +287,8 @@ void init_8259A(int auto_eoi)
 {
 	unsigned long flags;
 
+	i8259A_auto_eoi = auto_eoi;
+
 	spin_lock_irqsave(&i8259A_lock, flags);
 
 	outb(0xff, 0x21);	/* mask all of 8259A-1 */
@@ -369,9 +316,9 @@ void init_8259A(int auto_eoi)
 		 * in AEOI mode we just have to mask the interrupt
 		 * when acking.
 		 */
-		i8259A_irq_type.ack = disable_8259A_irq;
+		i8259A_chip.mask_ack = disable_8259A_irq;
 	else
-		i8259A_irq_type.ack = mask_and_ack_8259A;
+		i8259A_chip.mask_ack = mask_and_ack_8259A;
 
 	udelay(100);		/* wait for 8259A to initialize */
 
@@ -400,7 +347,7 @@ static void save_ELCR(char *trigger)
 
 static int i8259A_resume(struct sys_device *dev)
 {
-	init_8259A(0);
+	init_8259A(i8259A_auto_eoi);
 	restore_ELCR(irq_trigger);
 	return 0;
 }
@@ -449,14 +396,32 @@ device_initcall(i8259A_init_sysfs);
  */
 
 static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+	[0 ... FIRST_EXTERNAL_VECTOR - 1] = -1,
+	[FIRST_EXTERNAL_VECTOR + 0] = 0,
+	[FIRST_EXTERNAL_VECTOR + 1] = 1,
+	[FIRST_EXTERNAL_VECTOR + 2] = 2,
+	[FIRST_EXTERNAL_VECTOR + 3] = 3,
+	[FIRST_EXTERNAL_VECTOR + 4] = 4,
+	[FIRST_EXTERNAL_VECTOR + 5] = 5,
+	[FIRST_EXTERNAL_VECTOR + 6] = 6,
+	[FIRST_EXTERNAL_VECTOR + 7] = 7,
+	[FIRST_EXTERNAL_VECTOR + 8] = 8,
+	[FIRST_EXTERNAL_VECTOR + 9] = 9,
+	[FIRST_EXTERNAL_VECTOR + 10] = 10,
+	[FIRST_EXTERNAL_VECTOR + 11] = 11,
+	[FIRST_EXTERNAL_VECTOR + 12] = 12,
+	[FIRST_EXTERNAL_VECTOR + 13] = 13,
+	[FIRST_EXTERNAL_VECTOR + 14] = 14,
+	[FIRST_EXTERNAL_VECTOR + 15] = 15,
+	[FIRST_EXTERNAL_VECTOR + 16 ... NR_VECTORS - 1] = -1
+};
 
 void __init init_ISA_irqs (void)
 {
 	int i;
 
-#ifdef CONFIG_X86_LOCAL_APIC
 	init_bsp_APIC();
-#endif
 	init_8259A(0);
 
 	for (i = 0; i < NR_IRQS; i++) {
@@ -468,12 +433,13 @@ void __init init_ISA_irqs (void)
 			/*
 			 * 16 old-style INTA-cycle interrupts:
 			 */
-			irq_desc[i].handler = &i8259A_irq_type;
+			set_irq_chip_and_handler_name(i, &i8259A_chip,
+						      handle_level_irq, "XT");
 		} else {
 			/*
 			 * 'high' PCI IRQs filled in on demand
 			 */
-			irq_desc[i].handler = &no_irq_type;
+			irq_desc[i].chip = &no_irq_chip;
 		}
 	}
 }
@@ -547,8 +513,6 @@ void __init init_IRQ(void)
 	 */
 	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
 		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (i >= NR_IRQS)
-			break;
 		if (vector != IA32_SYSCALL_VECTOR)
 			set_intr_gate(vector, interrupt[i]);
 	}
@@ -558,7 +522,7 @@ void __init init_IRQ(void)
 	 * IRQ0 must be given a fixed assignment and initialized,
 	 * because it's used before the IO-APIC is set up.
 	 */
-	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+	__get_cpu_var(vector_irq)[FIRST_DEVICE_VECTOR] = 0;
 
 	/*
 	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
@@ -582,14 +546,12 @@ void __init init_IRQ(void)
 	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 	set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 
-#ifdef CONFIG_X86_LOCAL_APIC
 	/* self generated IPI for local APIC timer */
 	set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 
 	/* IPI vectors for APIC spurious and error interrupts */
 	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
 	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-#endif
 
 	/*
 	 * Set the clock to HZ Hz, we already have a valid