X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fx86_64%2Fkernel%2Fio_apic.c;h=ffed464e6b12274ff62ce9fa0a76e5dca9852663;hb=987b0145d94eecf292d8b301228356f44611ab7c;hp=9cc7031b715178cb069243fffb1bdbbe49483e1e;hpb=f7ed79d23a47594e7834d66a8f14449796d4f3e6;p=linux-2.6.git

diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 9cc7031b7..ffed464e6 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -50,7 +50,7 @@ static int no_timer_check;
 
 int disable_timer_pin_1 __initdata;
 
-int timer_over_8254 __initdata = 0;
+int timer_over_8254 __initdata = 1;
 
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
@@ -271,18 +271,6 @@ __setup("enable_8254_timer", setup_enable_8254_timer);
 #include <linux/pci_ids.h>
 #include <linux/pci.h>
 
-
-#ifdef CONFIG_ACPI
-
-static int nvidia_hpet_detected __initdata;
-
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
-{
-	nvidia_hpet_detected = 1;
-	return 0;
-}
-#endif
-
 /* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC
    off. Check for an Nvidia or VIA PCI bridge and turn it off.
    Use pci direct infrastructure because this runs before the PCI subsystem. 
@@ -322,26 +310,18 @@ void __init check_ioapic(void)
 					     force_iommu) &&
 					    !iommu_aperture_allowed) {
 						printk(KERN_INFO
-    "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n");
+    "Looks like a VIA chipset. Disabling IOMMU. Overwrite with \"iommu=allowed\"\n");
 						iommu_aperture_disabled = 1;
 					}
 #endif
 					return;
 				case PCI_VENDOR_ID_NVIDIA:
 #ifdef CONFIG_ACPI
-					/*
-					 * All timer overrides on Nvidia are
-					 * wrong unless HPET is enabled.
-					 */
-					nvidia_hpet_detected = 0;
-					acpi_table_parse(ACPI_HPET,
-							nvidia_hpet_check);
-					if (nvidia_hpet_detected == 0) {
-						acpi_skip_timer_override = 1;
-						printk(KERN_INFO "Nvidia board "
-						    "detected. Ignoring ACPI "
-						    "timer override.\n");
-					}
+					/* All timer overrides on Nvidia
+				           seem to be wrong. Skip them. */
+					acpi_skip_timer_override = 1;
+					printk(KERN_INFO 
+	     "Nvidia board detected. Ignoring ACPI timer override.\n");
 #endif
 					/* RED-PEN skip them on mptables too? */
 					return;
@@ -1797,8 +1777,6 @@ static inline void unlock_ExtINT_logic(void)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-int timer_uses_ioapic_pin_0;
-
 /*
  * This code may look a bit paranoid, but it's supposed to cooperate with
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
@@ -1836,9 +1814,6 @@ static inline void check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	if (pin1 == 0)
-		timer_uses_ioapic_pin_0 = 1;
-
 	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
 		vector, apic1, pin1, apic2, pin2);
 
@@ -1873,7 +1848,7 @@ static inline void check_timer(void)
 		 */
 		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
 		if (timer_irq_works()) {
-			apic_printk(APIC_VERBOSE," works.\n");
+			printk("works.\n");
 			nmi_watchdog_default();
 			if (nmi_watchdog == NMI_IO_APIC) {
 				setup_nmi();
@@ -1885,7 +1860,7 @@ static inline void check_timer(void)
 		 */
 		clear_IO_APIC_pin(apic2, pin2);
 	}
-	apic_printk(APIC_VERBOSE," failed.\n");
+	printk(" failed.\n");
 
 	if (nmi_watchdog == NMI_IO_APIC) {
 		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
@@ -1900,7 +1875,7 @@ static inline void check_timer(void)
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
+		apic_printk(APIC_QUIET, " works.\n");
 		return;
 	}
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);