X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=arch%2Fx86_64%2Fpci%2Fmmconfig.c;h=009196ae3c5b97bf3c926bb5a181bd2a89789e58;hb=refs%2Fheads%2Fvserver;hp=18f371fe37f89639f06ba4e24f876ea9854fd003;hpb=64ba3f394c830ec48a1c31b53dcae312c56f1604;p=linux-2.6.git

diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index 18f371fe3..009196ae3 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -9,11 +9,19 @@
 #include <linux/init.h>
 #include <linux/acpi.h>
 #include <linux/bitmap.h>
+#include <asm/e820.h>
+
 #include "pci.h"
 
-#define MMCONFIG_APER_SIZE (256*1024*1024)
+/* aperture is up to 256MB but BIOS may reserve less */
+#define MMCONFIG_APER_MIN	(2 * 1024*1024)
+#define MMCONFIG_APER_MAX	(256 * 1024*1024)
+
+/* Verify the first 16 busses. We assume that systems with more busses
+   get MCFG right. */
+#define MAX_CHECK_BUS 16
 
-static DECLARE_BITMAP(fallback_slots, 32);
+static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
 
 /* Static virtual mapping of the MMCONFIG aperture */
 struct mmcfg_virt {
@@ -55,7 +63,8 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus)
 static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
 {
 	char __iomem *addr;
-	if (seg == 0 && bus == 0 && test_bit(PCI_SLOT(devfn), &fallback_slots))
+	if (seg == 0 && bus < MAX_CHECK_BUS &&
+		test_bit(32*bus + PCI_SLOT(devfn), fallback_slots))
 		return NULL;
 	addr = get_virt(seg, bus);
 	if (!addr)
@@ -69,8 +78,10 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 	char __iomem *addr;
 
 	/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
-	if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095)))
+	if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
+		*value = -1;
 		return -EINVAL;
+	}
 
 	addr = pci_dev_base(seg, bus, devfn);
 	if (!addr)
@@ -129,51 +140,67 @@ static struct pci_raw_ops pci_mmcfg = {
    Normally this can be expressed in the MCFG by not listing them
    and assigning suitable _SEGs, but this isn't implemented in some BIOS.
    Instead try to discover all devices on bus 0 that are unreachable using MM
-   and fallback for them.
-   We only do this for bus 0/seg 0 */
+   and fallback for them. */
 static __init void unreachable_devices(void)
 {
-	int i;
-	for (i = 0; i < 32; i++) {
-		u32 val1;
-		char __iomem *addr;
-
-		pci_conf1_read(0, 0, PCI_DEVFN(i,0), 0, 4, &val1);
-		if (val1 == 0xffffffff)
-			continue;
-		addr = pci_dev_base(0, 0, PCI_DEVFN(i, 0));
-		if (addr == NULL|| readl(addr) != val1) {
-			set_bit(i, &fallback_slots);
+	int i, k;
+	/* Use the max bus number from ACPI here? */
+	for (k = 0; k < MAX_CHECK_BUS; k++) {
+		for (i = 0; i < 32; i++) {
+			u32 val1;
+			char __iomem *addr;
+
+			pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
+			if (val1 == 0xffffffff)
+				continue;
+			addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
+			if (addr == NULL|| readl(addr) != val1) {
+				set_bit(i + 32*k, fallback_slots);
+				printk(KERN_NOTICE "PCI: No mmconfig possible"
+				       " on device %02x:%02x\n", k, i);
+			}
 		}
 	}
 }
 
-static int __init pci_mmcfg_init(void)
+void __init pci_mmcfg_init(int type)
 {
 	int i;
 
 	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
-		return 0;
+		return;
 
 	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
 	if ((pci_mmcfg_config_num == 0) ||
 	    (pci_mmcfg_config == NULL) ||
 	    (pci_mmcfg_config[0].base_address == 0))
-		return 0;
+		return;
+
+	/* Only do this check when type 1 works. If it doesn't work
+           assume we run on a Mac and always use MCFG */
+	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
+			pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+			E820_RESERVED)) {
+		printk(KERN_INFO "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
+				pci_mmcfg_config[0].base_address);
+		printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
+		return;
+	}
 
-	/* RED-PEN i386 doesn't do _nocache right now */
 	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
 	if (pci_mmcfg_virt == NULL) {
-		printk("PCI: Can not allocate memory for mmconfig structures\n");
-		return 0;
+		printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
+		return;
 	}
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
 		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
-		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE);
+		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
+							 MMCONFIG_APER_MAX);
 		if (!pci_mmcfg_virt[i].virt) {
-			printk("PCI: Cannot map mmconfig aperture for segment %d\n",
+			printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
+					"segment %d\n",
 			       pci_mmcfg_config[i].pci_segment_group_number);
-			return 0;
+			return;
 		}
 		printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
 	}
@@ -182,8 +209,4 @@ static int __init pci_mmcfg_init(void)
 
 	raw_pci_ops = &pci_mmcfg;
 	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
-
-	return 0;
 }
-
-arch_initcall(pci_mmcfg_init);