X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=build.sh;h=b6fff0bd865d5a2093f1901aa098c4160be83408;hb=a1dc5376e0df2b95b1d3061f48352905f47b08ef;hp=b62308b6096cb46cf636e1fb9b56d0589ddc486d;hpb=d44c6a7a18681c562b053e777d20cc9dc37f7d63;p=bootcd.git

diff --git a/build.sh b/build.sh
index b62308b..b6fff0b 100755
--- a/build.sh
+++ b/build.sh
@@ -7,8 +7,6 @@
 # Mark Huang <mlhuang@cs.princeton.edu>
 # Copyright (C) 2004-2007 The Trustees of Princeton University
 #
-# $Id$
-#
 
 COMMAND=$(basename $0)
 DIRNAME=$(dirname $0)
@@ -30,7 +28,7 @@ OUTPUT_BASE=
 DRY_RUN=""
 OUTPUT_NAME=""
 TYPES=""
-KARGS_STR=""
+KERNEL_ARGS=""
 
 # various globals
 BUILDTMP=""
@@ -43,7 +41,6 @@ console_dev=""
 console_baud=""
 console_spec=""
 console_serial_line=""
-kernel_args=""
 
 
 #################### compute all supported types
@@ -163,7 +160,7 @@ function parse_command_line () {
 	    o) OUTPUT_NAME="$OPTARG" ;;
 	    C) CUSTOM_DIR="$OPTARG" ;;
 	    V) VARIANT="$OPTARG" ;;
-	    k) KARGS_STR="$KARGS_STR $OPTARG" ;;
+	    k) KERNEL_ARGS="$KERNEL_ARGS $OPTARG" ;;
 	    n) DRY_RUN=true ;;
 	    h|*) usage ;;
 	esac
@@ -333,14 +330,19 @@ EOF
 	plnet -- --root $OVERLAY --files-only --program BootCD $NODE_ID
     fi
 
-    if [ -n "$IS_SERIAL" ] ; then
-	KARGS_STR="$KARGS_STR ${console_spec}"
-    fi
+    [ -n "$IS_SERIAL" ] && KERNEL_ARGS="$KERNEL_ARGS ${console_spec}"
 
-    if [ -n "$KARGS_STR" ] ; then
-	echo "$KARGS_STR" > $OVERLAY/kargs.txt
-	kernel_args=$KARGS_STR
-    fi
+    # tmp: should be restricted to f15 nodes and above
+    # making sure the network interfaces are still numbered eth0 and above
+    KERNEL_ARGS="$KERNEL_ARGS biosdevname=0"
+    # making sure selinux is turned off - somehow this is needed with lxc/f14
+    KERNEL_ARGS="$KERNEL_ARGS selinux=0"
+# cannot use this mecahnism to set systemd default target because this applies to kexec boots as well
+#    # set default target for systemd
+#    KERNEL_ARGS="$KERNEL_ARGS systemd.unit=pl_boot.target"
+    # output more systemd-related messages on the console
+    KERNEL_ARGS="$KERNEL_ARGS systemd.log_level=debug systemd.log_target=kmsg"
+    [ -n "$KERNEL_ARGS" ] && echo "$KERNEL_ARGS" > $OVERLAY/kargs.txt
 
     # Pack overlay files into a compressed archive
     echo "* Compressing overlay image"
@@ -372,7 +374,7 @@ function build_iso() {
     cat >$ISOFS/isolinux.cfg <<EOF
 ${console_serial_line}
 DEFAULT kernel
-APPEND ramdisk_size=$ramdisk_size initrd=bootcd.img,overlay.img${custom:+,custom.img} root=/dev/ram0 rw ${kernel_args}
+APPEND ramdisk_size=$ramdisk_size initrd=bootcd.img,overlay.img${custom:+,custom.img} root=/dev/ram0 rw ${KERNEL_ARGS}
 DISPLAY pl_version
 PROMPT 0
 TIMEOUT 40
@@ -397,8 +399,12 @@ function build_usb_partition() {
     local cylinders=$(( ($size*1024*2)/($heads*$sectors) ))
     local offset=$(( $sectors*512 ))
 
-    /usr/lib/syslinux/mkdiskimage -M -4 "$usb" $size $heads $sectors
-    
+    if [ -f  /usr/lib/syslinux/mkdiskimage ] ; then
+        /usr/lib/syslinux/mkdiskimage -M -4 "$usb" $size $heads $sectors
+    else
+        mkdiskimage -M -4 "$usb" $size $heads $sectors
+    fi
+
     cat >${BUILDTMP}/mtools.conf<<EOF
 drive z:
 file="${usb}"
@@ -421,7 +427,7 @@ EOF
     cat >$tmp <<EOF
 ${console_serial_line}
 DEFAULT kernel
-APPEND ramdisk_size=$ramdisk_size initrd=bootcd.img,overlay.img${custom:+,custom.img} root=/dev/ram0 rw ${kernel_args}
+APPEND ramdisk_size=$ramdisk_size initrd=bootcd.img,overlay.img${custom:+,custom.img} root=/dev/ram0 rw ${KERNEL_ARGS}
 DISPLAY pl_version
 PROMPT 0
 TIMEOUT 40
@@ -461,7 +467,7 @@ EOF
     cat >$tmp <<EOF
 ${console_serial_line}
 DEFAULT kernel
-APPEND ramdisk_size=$ramdisk_size initrd=bootcd.img,overlay.img${custom:+,custom.img} root=/dev/ram0 rw ${kernel_args}
+APPEND ramdisk_size=$ramdisk_size initrd=bootcd.img,overlay.img${custom:+,custom.img} root=/dev/ram0 rw ${KERNEL_ARGS}
 DISPLAY pl_version
 PROMPT 0
 TIMEOUT 40
@@ -544,9 +550,12 @@ EOF
     popd
 
     # update etc/inittab to start with pl_rsysinit
-    sed -i 's,pl_sysinit,pl_rsysinit,' etc/inittab
+    for file in etc/inittab etc/event.d/rcS etc/init/rcS.conf; do
+	[ -f $file ] && sed -i 's,pl_sysinit,pl_rsysinit,' $file
+    done
 
     # modify inittab to have a serial console
+    # xxx this might well be broken with f12 and above xxx
     if [ -n "$serial" ] ; then
 	echo "T0:23:respawn:/sbin/agetty -L $console_dev $console_baud vt100" >> etc/inittab
         # and let root log in
@@ -620,7 +629,7 @@ function build_iso_cramfs() {
     cat >$tmp/isolinux.cfg <<EOF
 ${console_serial_line}
 DEFAULT kernel
-APPEND ramdisk_size=$cramfs_size initrd=cramfs.img root=/dev/ram0 ro ${kernel_args}
+APPEND ramdisk_size=$cramfs_size initrd=cramfs.img root=/dev/ram0 ro ${KERNEL_ARGS}
 DISPLAY pl_version
 PROMPT 0
 TIMEOUT 40
@@ -658,7 +667,7 @@ function build_usb_cramfs() {
     cat >$tmp <<EOF
 ${console_serial_line}
 DEFAULT kernel
-APPEND ramdisk_size=$cramfs_size initrd=cramfs.img root=/dev/ram0 ro ${kernel_args}
+APPEND ramdisk_size=$cramfs_size initrd=cramfs.img root=/dev/ram0 ro ${KERNEL_ARGS}
 DISPLAY pl_version
 PROMPT 0
 TIMEOUT 40