X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=db-config;h=c1ef89ec9d352f81099c6469e2b0cbbcf465a8bb;hb=dabd6c2be6390b1b437e1c2123e810e877d1259c;hp=4935860bbdca39ba7e254bc7e6eb1bef78901323;hpb=5fc63bd65662723db059f772825d32d7249cf7fa;p=myplc.git diff --git a/db-config b/db-config index 4935860..c1ef89e 100755 --- a/db-config +++ b/db-config @@ -7,7 +7,7 @@ # Mark Huang # Copyright (C) 2006 The Trustees of Princeton University # -# $Id$ +# $Id: db-config,v 1.18 2007/01/30 23:11:14 mlhuang Exp $ # from plc_config import PLCConfiguration @@ -516,29 +516,41 @@ def main(): 'min_role_id': 10}, # Bandwidth limits - {'name': "net_min", - 'description': "Minimum bandwidth (bps)", - 'min_role_id': 10}, - {'name': "net_max", - 'description': "Maximum bandwidth (bps)", - 'min_role_id': 10}, - {'name': "net_avg", - 'description': "Average bandwidth (bps)", - 'min_role_id': 10}, + #{'name': "net_min", + # 'description': "Minimum bandwidth (bps)", + # 'min_role_id': 10}, + #{'name': "net_max", + # 'description': "Maximum bandwidth (bps)", + # 'min_role_id': 10}, + #{'name': "net_avg", + # 'description': "Average bandwidth (bps)", + # 'min_role_id': 10}, {'name': "net_share", 'description': "Number of bandwidth shares", 'min_role_id': 10}, - {'name': "net2_min", - 'description': "Minimum bandwidth over routes exempt from node bandwidth limits (bps)", + #{'name': "net2_min", + # 'description': "Minimum bandwidth over routes exempt from node bandwidth limits (bps)", + # 'min_role_id': 10}, + #{'name': "net2_max", + # 'description': "Maximum bandwidth over routes exempt from node bandwidth limits (bps)", + # 'min_role_id': 10}, + #{'name': "net2_avg", + # 'description': "Average bandwidth over routes exempt from node bandwidth limits (bps)", + # 'min_role_id': 10}, + {'name': "net2_share", + 'description': "Number of bandwidth shares over routes exempt from node bandwidth limits", 'min_role_id': 10}, - {'name': "net2_max", - 'description': "Maximum bandwidth over routes exempt from node bandwidth limits (bps)", + {'name': "KByteMax", + 'description': "Maximum daily network Tx KByte limit.", 'min_role_id': 10}, - {'name': "net2_avg", - 'description': "Average bandwidth over routes exempt from node bandwidth limits (bps)", + {'name': "KByteThresh", + 'description': "Threshold KByte limit before warning and throttling.", 'min_role_id': 10}, - {'name': "net2_share", - 'description': "Number of bandwidth shares over routes exempt from node bandwidth limits", + {'name': "KByteMaxI2", + 'description': "Maximum daily network Tx KByte limit to I2 hosts.", + 'min_role_id': 10}, + {'name': "KByteThreshI2", + 'description': "Threshold KByte limit to I2 hosts before warning and throttling.", 'min_role_id': 10}, # Disk quota @@ -662,6 +674,18 @@ def main(): if (name, value) not in slice_attributes: AddSliceAttribute(slice['name'], name, value) + installfailed = """ +Once the node meets these requirements, please reinitiate the install +by visiting: + +https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d + +Click the Reinstall link, then reboot the node. + +If you have already performed this step and are still receiving this +message, please reply so that we may investigate the problem. +""" + # Load default message templates message_templates = [ {'message_id': 'Verify account', @@ -739,6 +763,140 @@ https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/persons/index.php?id=%(person_i If you did not request that your password be reset, please contact %(PLC_NAME)s Support <%(PLC_MAIL_SUPPORT_ADDRESS)s>. Do not quote or otherwise include any of this text in any correspondence. +""" + }, + + # Boot Manager messages + {'message_id': "installfinished", + 'subject': "%(hostname)s completed installation", + 'template': """ +%(hostname)s just completed installation. + +The node should be usable in a couple of minutes if installation was +successful. +""" + }, + + {'message_id': "insufficientdisk", + 'subject': "%(hostname)s does not have sufficient disk space", + 'template': """ +%(hostname)s failed to boot because it does not have sufficent disk +space, or because its disk controller was not recognized. + +Please replace the current disk or disk controller or install +additional disks to meet the current hardware requirements. +""" + installfailed + }, + + {'message_id': "insufficientmemory", + 'subject': "%(hostname)s does not have sufficient memory", + 'template': """ +%(hostname)s failed to boot because it does not have sufficent +memory. + +Please install additional memory to meet the current hardware +requirements. +""" + installfailed + }, + + {'message_id': "authfail", + 'subject': "%(hostname)s failed to authenticate", + 'template': +""" +%(hostname)s failed to authenticate for the following reason: + +%(fault)s + +The most common reason for authentication failure is that the +authentication key stored in the node configuration file, does not +match the key on record. Regenerate the node configuration file by +visiting: + +https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d + +Click the Configuration File link, and save the downloaded file as +plnode.txt on either a floppy disk or a USB flash drive. Click the +Boot link, then reboot the node. + +If you have already performed this step and are still receiving this +message, please reply so that we may investigate the problem. +""" + }, + + {'message_id': "notinstalled", + 'subject': "%(hostname)s is not installed", + 'template': +""" +%(hostname)s failed to boot because it has either never been +installed, or the installation is corrupt. + +Please check if the hard drive has failed, and replace it if so. After +doing so, visit: + +https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d + +Click the Reinstall link, then reboot the node. + +If you have already performed this step and are still receiving this +message, please reply so that we may investigate the problem. +""" + }, + + {'message_id': "hostnamenotresolve", + 'subject': "%(hostname)s does not resolve", + 'template': +""" +%(hostname)s failed to boot because its hostname does not resolve, or +does resolve but does not match its configured IP address. + +Please check the network settings for the node, especially its +hostname, IP address, and DNS servers, by visiting: + +https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d + +Correct any errors, click the Reinstall link, then reboot the node. + +If you have already performed this step and are still receiving this +message, please reply so that we may investigate the problem. +""" + }, + + # XXX N.B. I don't think these are necessary, since there's no + # way that the Boot Manager would even be able to contact the + # API to send these messages. + + {'message_id': "noconfig", + 'subject': "%(hostname)s does not have a configuration file", + 'template': """ +%(hostname)s failed to boot because it could not find a PlanetLab +configuration file. To create this file, visit: + +https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d + +Click the Configuration File link, and save the downloaded file as +plnode.txt on either a floppy disk or a USB flash drive. Click the +Reinstall link, then reboot the node. + +If you have already performed this step and are still receiving this +message, please reply so that we may investigate the problem. +""" + }, + + {'message_id': "nodetectednetwork", + 'subject': "%(hostname)s has unsupported network hardware", + 'template': +""" + +%(hostname)s failed to boot because it has network hardware that is +unsupported by the current production kernel. If it has booted +successfully in the past, please try re-installing it by visiting: + +https://%(PLC_WWW_HOST)s:%(PLC_WWW_SSL_PORT)d/db/nodes/?id=%(node_id)d + +Click the Reinstall link, then reboot the node. + +If you have already performed this step and are still receiving this +message, please reply so that we may investigate the problem. """ }, ]