X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=debian%2Fopenvswitch-switch.README.Debian;h=a316003c62611b7f7b934a874baeb38a9c0e45db;hb=ac60863f78e412004c5b69f5a64a49bc6f0bc46d;hp=8617e77103eadb55a5083de6400efde53109b29e;hpb=1e3f34c7693bcabae8e443ac1b246680ef9b60e2;p=sliver-openvswitch.git diff --git a/debian/openvswitch-switch.README.Debian b/debian/openvswitch-switch.README.Debian index 8617e7710..a316003c6 100644 --- a/debian/openvswitch-switch.README.Debian +++ b/debian/openvswitch-switch.README.Debian @@ -27,9 +27,9 @@ allow-br0 eth0 The following OVS specific "command" options are supported: - - ovs_type: This can either be OVSBridge, OVSPort, OVSIntPort or OVSBond - depending on whether you configure a bridge, port, an internal port or - a bond. This is a required option. + - ovs_type: This can either be OVSBridge, OVSPort, OVSIntPort, OVSBond or + OVSTunnel depending on whether you configure a bridge, port, an internal + port, a bond or a tunnel. This is a required option. - ovs_ports: This option specifies all the ports that belong to a bridge. @@ -39,6 +39,12 @@ The following OVS specific "command" options are supported: - ovs_bonds: This option specifies the list of physical interfaces to be bonded together. + - ovs_tunnel_type: For "OVSTunnel" interfaces, the type of the tunnel. + For example, "gre", "vxlan", etc. + + - ovs_tunnel_options: For "OVSTunnel" interfaces, this field should be + used to specify the tunnel options like remote_ip, key, etc. + - ovs_options: This option lets you add extra arguments to a ovs-vsctl command. See examples. @@ -121,7 +127,23 @@ iface bond0 inet manual ovs_bonds eth2 eth3 ovs_options bond_mode=balance-tcp lacp=active -ex 6: Create and destroy bridges. +ex 6: Tunnel. + +allow-ovs br1 +iface br1 inet static + address 192.168.1.1 + netmask 255.255.255.0 + ovs_type OVSBridge + ovs_ports gre1 + +allow-br1 gre1 +iface gre1 inet manual + ovs_bridge br1 + ovs_type OVSTunnel + ovs_tunnel_type gre + ovs_tunnel_options options:remote_ip=182.168.1.2 options:key=1 + +ex 7: Create and destroy bridges. ifup --allow=ovs $list_of_bridges ifdown --allow=ovs $list_of_bridges