X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fatm%2Flanai.c;h=e23d3f714dd22d7729f785b102d13276904d9718;hb=c7b5ebbddf7bcd3651947760f423e3783bbe6573;hp=53f6d29c5b0891574fc6ca4c2454b6f0a4600838;hpb=9bf4aaab3e101692164d49b7ca357651eb691cb6;p=linux-2.6.git

diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 53f6d29c5..e23d3f714 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -191,7 +191,7 @@
 #define LANAI_EEPROM_SIZE	(128)
 
 typedef int vci_t;
-typedef unsigned long bus_addr_t;
+typedef void __iomem *bus_addr_t;
 
 /* DMA buffer in host memory for TX, RX, or service list. */
 struct lanai_buffer {
@@ -471,7 +471,7 @@ enum lanai_register {
 static inline bus_addr_t reg_addr(const struct lanai_dev *lanai,
 	enum lanai_register reg)
 {
-	return lanai->base + (bus_addr_t) reg;
+	return lanai->base + reg;
 }
 
 static inline u32 reg_read(const struct lanai_dev *lanai,
@@ -651,7 +651,7 @@ static inline u32 cardvcc_read(const struct lanai_vcc *lvcc,
 {
 	u32 val;
 	APRINTK(lvcc->vbase != 0, "cardvcc_read: unbound vcc!\n");
-	val= readl(lvcc->vbase + (bus_addr_t) offset);
+	val= readl(lvcc->vbase + offset);
 	RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n",
 	    lvcc->vci, (int) offset, val);
 	return val;
@@ -666,7 +666,7 @@ static inline void cardvcc_write(const struct lanai_vcc *lvcc,
 	    (unsigned int) val, lvcc->vci, (unsigned int) offset);
 	RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n",
 	    lvcc->vci, (unsigned int) offset, (unsigned int) val);
-	writel(val, lvcc->vbase + (bus_addr_t) offset);
+	writel(val, lvcc->vbase + offset);
 }
 
 /* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */
@@ -813,7 +813,7 @@ static void lanai_shutdown_tx_vci(struct lanai_dev *lanai,
 			DPRINTK("read, write = %d, %d\n", read, write);
 			break;
 		}
-		schedule_timeout(HZ / 25);
+		msleep(40);
 	}
 	/* 15.2.2 - clear out all tx registers */
 	cardvcc_write(lvcc, 0, vcc_txreadptr);
@@ -2177,7 +2177,7 @@ static int __init lanai_dev_open(struct atm_dev *atmdev)
 	/* 3.2: PCI initialization */
 	if ((result = lanai_pci_start(lanai)) != 0)
 		goto error;
-	raw_base = (bus_addr_t) lanai->pci->resource[0].start;
+	raw_base = lanai->pci->resource[0].start;
 	lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE);
 	if (lanai->base == 0) {
 		printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");