X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fchar%2FKconfig;h=20ef466c382122959d233e0c9e84ec2855c94e78;hb=refs%2Fheads%2Fvserver;hp=6561e49d59a4866e683aefd155baae14fe5507cb;hpb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;p=linux-2.6.git diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 6561e49d5..20ef466c3 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -97,7 +97,7 @@ config SERIAL_NONSTANDARD config COMPUTONE tristate "Computone IntelliPort Plus serial support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) ---help--- This driver supports the entire family of Intelliport II/Plus controllers with the exception of the MicroChannel controllers and @@ -201,9 +201,24 @@ config MOXA_SMARTIO The module will be called mxser. If you want to do that, say M here. +config MOXA_SMARTIO_NEW + tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)" + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + help + Say Y here if you have a Moxa SmartIO multiport serial card and/or + want to help develop a new version of this driver. + + This is upgraded (1.9.1) driver from original Moxa drivers with + changes finally resulting in PCI probing. + + Use at your own risk. + + This driver can also be built as a module. The module will be called + mxser_new. If you want to do that, say M here. + config ISI tristate "Multi-Tech multiport card support (EXPERIMENTAL)" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && PCI select FW_LOADER help This is a driver for the Multi-Tech cards which provide several @@ -297,7 +312,7 @@ config SPECIALIX_RTSCTS config SX tristate "Specialix SX (and SI) card support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help This is a driver for the SX and SI multiport serial cards. Please read the file for details. @@ -371,36 +386,6 @@ config AU1000_SERIAL_CONSOLE If you have an Alchemy AU1000 processor (MIPS based) and you want to use a console on a serial port, say Y. Otherwise, say N. -config QTRONIX_KEYBOARD - bool "Enable Qtronix 990P Keyboard Support" - depends on IT8712 - help - Images of Qtronix keyboards are at - . - -config IT8172_CIR - bool - depends on QTRONIX_KEYBOARD - default y - -config IT8172_SCR0 - bool "Enable Smart Card Reader 0 Support " - depends on IT8712 - help - Say Y here to support smart-card reader 0 (SCR0) on the Integrated - Technology Express, Inc. ITE8172 SBC. Vendor page at - ; picture of the - board at . - -config IT8172_SCR1 - bool "Enable Smart Card Reader 1 Support " - depends on IT8712 - help - Say Y here to support smart-card reader 1 (SCR1) on the Integrated - Technology Express, Inc. ITE8172 SBC. Vendor page at - ; picture of the - board at . - config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP @@ -497,6 +482,21 @@ config LEGACY_PTY_COUNT When not in use, each legacy PTY occupies 12 bytes on 32-bit architectures and 24 bytes on 64-bit architectures. +config BRIQ_PANEL + tristate 'Total Impact briQ front panel driver' + depends on PPC_CHRP + ---help--- + The briQ is a small footprint CHRP computer with a frontpanel VFD, a + tristate led and two switches. It is the size of a CDROM drive. + + If you have such one and want anything showing on the VFD then you + must answer Y here. + + To compile this driver as a module, choose M here: the + module will be called briq_panel. + + It's safe to say N here. + config PRINTER tristate "Parallel printer support" depends on PARPORT @@ -598,6 +598,13 @@ config HVC_CONSOLE console. This driver allows each pSeries partition to have a console which is accessed via the HMC. +config HVC_ISERIES + bool "iSeries Hypervisor Virtual Console support" + depends on PPC_ISERIES && !VIOCONS + select HVC_DRIVER + help + iSeries machines support a hypervisor virtual console. + config HVC_RTAS bool "IBM RTAS Console support" depends on PPC_RTAS @@ -719,7 +726,7 @@ config NVRAM config RTC tristate "Enhanced Real Time Clock Support" - depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM + depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -803,14 +810,6 @@ config DS1302 will get access to the real time clock (or hardware clock) built into your computer. -config S3C2410_RTC - bool "S3C2410 RTC Driver" - depends on ARCH_S3C2410 - help - RTC (Realtime Clock) driver for the clock inbuilt into the - Samsung S3C2410. This can provide periodic interrupt rates - from 1Hz to 64Hz for user programs, and wakeup from Alarm. - config COBALT_LCD bool "Support for Cobalt LCD" depends on MIPS_COBALT @@ -870,42 +869,9 @@ config SONYPI config TANBAC_TB0219 tristate "TANBAC TB0219 base board support" - depends TANBAC_TB022X + depends on TANBAC_TB022X select GPIO_VR41XX -menu "Ftape, the floppy tape device driver" - -config FTAPE - tristate "Ftape (QIC-80/Travan) support" - depends on BROKEN_ON_SMP && (ALPHA || X86) - ---help--- - If you have a tape drive that is connected to your floppy - controller, say Y here. - - Some tape drives (like the Seagate "Tape Store 3200" or the Iomega - "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed" - controller of their own. These drives (and their companion - controllers) are also supported if you say Y here. - - If you have a special controller (such as the CMS FC-10, FC-20, - Mountain Mach-II, or any controller that is based on the Intel 82078 - FDC like the high speed controllers by Seagate and Exabyte and - Iomega's "Ditto Dash") you must configure it by selecting the - appropriate entries from the "Floppy tape controllers" sub-menu - below and possibly modify the default values for the IRQ and DMA - channel and the IO base in ftape's configuration menu. - - If you want to use your floppy tape drive on a PCI-bus based system, - please read the file . - - The ftape kernel driver is also available as a runtime loadable - module. To compile this driver as a module, choose M here: the - module will be called ftape. - -source "drivers/char/ftape/Kconfig" - -endmenu - source "drivers/char/agp/Kconfig" source "drivers/char/drm/Kconfig" @@ -986,6 +952,7 @@ config GPIO_VR41XX config RAW_DRIVER tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)" + depends on BLOCK help The raw driver permits block devices to be bound to /dev/raw/rawN. Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. @@ -1011,7 +978,7 @@ config HPET help If you say Y here, you will have a miscdevice named "/dev/hpet/". Each open selects one of the timers supported by the HPET. The timers are - non-periodioc and/or periodic. + non-periodic and/or periodic. config HPET_RTC_IRQ bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC @@ -1055,7 +1022,7 @@ source "drivers/char/tpm/Kconfig" config TELCLOCK tristate "Telecom clock driver for MPBL0010 ATCA SBC" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && X86 default n help The telecom clock device is specific to the MPBL0010 ATCA computer and