X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fchar%2Fserial167.c;h=21a710cb4bbaed1df2ebfc6a6044bcf5abeb67c4;hb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;hp=c2deac968bdd7c607864a99b72651911d4746e78;hpb=6a77f38946aaee1cd85eeec6cf4229b204c15071;p=linux-2.6.git

diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index c2deac968..21a710cb4 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -44,7 +44,6 @@
  * - replace bottom half handler with task queue handler
  */
 
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -117,7 +116,7 @@ struct cyclades_port cy_port[] = {
         {-1 },      /* ttyS2 */
         {-1 },      /* ttyS3 */
 };
-#define NR_PORTS        (sizeof(cy_port)/sizeof(struct cyclades_port))
+#define NR_PORTS        ARRAY_SIZE(cy_port)
 
 /*
  * tmp_buf is used as a temporary buffer by serial_write.  We need to
@@ -129,7 +128,6 @@ struct cyclades_port cy_port[] = {
  * memory if large numbers of serial ports are open.
  */
 static unsigned char *tmp_buf = 0;
-DECLARE_MUTEX(tmp_buf_sem);
 
 /*
  * This is used to look up the divisor speeds and the timeouts
@@ -422,45 +420,35 @@ cd2401_rxerr_interrupt(int irq, void *dev_id, struct pt_regs *fp)
 	    base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
 	    return IRQ_HANDLED;
 	}
-	if (tty->flip.count < TTY_FLIPBUF_SIZE){
-	    tty->flip.count++;
+	if (tty_buffer_request_room(tty, 1) != 0){
 	    if (err & info->read_status_mask){
 		if(err & CyBREAK){
-		    *tty->flip.flag_buf_ptr++ = TTY_BREAK;
-		    *tty->flip.char_buf_ptr++ = data;
+		    tty_insert_flip_char(tty, data, TTY_BREAK);
 		    if (info->flags & ASYNC_SAK){
 			do_SAK(tty);
 		    }
 		}else if(err & CyFRAME){
-		    *tty->flip.flag_buf_ptr++ = TTY_FRAME;
-		    *tty->flip.char_buf_ptr++ = data;
+		    tty_insert_flip_char(tty, data, TTY_FRAME);
 		}else if(err & CyPARITY){
-		    *tty->flip.flag_buf_ptr++ = TTY_PARITY;
-		    *tty->flip.char_buf_ptr++ = data;
+		    tty_insert_flip_char(tty, data, TTY_PARITY);
 		}else if(err & CyOVERRUN){
-		    *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
-		    *tty->flip.char_buf_ptr++ = 0;
+		    tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 		    /*
 		       If the flip buffer itself is
 		       overflowing, we still loose
 		       the next incoming character.
 		     */
-		    if(tty->flip.count < TTY_FLIPBUF_SIZE){
-			tty->flip.count++;
-			*tty->flip.flag_buf_ptr++ = TTY_NORMAL;
-			*tty->flip.char_buf_ptr++ = data;
-		    }
+		    tty_insert_flip_char(tty, data, TTY_NORMAL);
+		}
 		/* These two conditions may imply */
 		/* a normal read should be done. */
 		/* else if(data & CyTIMEOUT) */
 		/* else if(data & CySPECHAR) */
 		}else{
-		    *tty->flip.flag_buf_ptr++ = 0;
-		    *tty->flip.char_buf_ptr++ = 0;
+		    tty_insert_flip_char(tty, 0, TTY_NORMAL);
 		}
 	    }else{
-		*tty->flip.flag_buf_ptr++ = 0;
-		*tty->flip.char_buf_ptr++ = 0;
+		    tty_insert_flip_char(tty, data, TTY_NORMAL);
 	    }
 	}else{
 	    /* there was a software buffer overrun
@@ -692,12 +680,7 @@ cd2401_rx_interrupt(int irq, void *dev_id, struct pt_regs *fp)
 #endif
 	while(char_count--){
 	    data = base_addr[CyRDR];
-	    if (tty->flip.count >= TTY_FLIPBUF_SIZE){
-		continue;
-	    }
-	    tty->flip.count++;
-	    *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
-	    *tty->flip.char_buf_ptr++ = data;
+	    tty_insert_flip_char(tty, data, TTY_NORMAL);
 #ifdef CYCLOM_16Y_HACK
 	    udelay(10L);
 #endif
@@ -2251,7 +2234,6 @@ scrn[1] = '\0';
     /* Initialize the tty_driver structure */
     
     cy_serial_driver->owner = THIS_MODULE;
-    cy_serial_driver->devfs_name = "tts/";
     cy_serial_driver->name = "ttyS";
     cy_serial_driver->major = TTY_MAJOR;
     cy_serial_driver->minor_start = 64;