X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fi2c%2Fbusses%2FKconfig;h=0188a9db83eab054752d4f65b15ff4f09812cc6a;hb=987b0145d94eecf292d8b301228356f44611ab7c;hp=d6d44946a283156e6d3829b6b6fca039ad331992;hpb=f7ed79d23a47594e7834d66a8f14449796d4f3e6;p=linux-2.6.git

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d6d44946a..0188a9db8 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -125,6 +125,7 @@ config I2C_I801
 	    ICH7
 	    ESB2
 	    ICH8
+	    ICH9
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -168,14 +169,12 @@ config I2C_PIIX4
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset are supported (note that Serverworks is part
-	  of Broadcom):
+	  versions of the chipset are supported:
 	    Intel PIIX4
 	    Intel 440MX
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
-	    Serverworks HT-1000
 	    SMSC Victory66
 
 	  This driver can also be built as a module.  If so, the module
@@ -286,10 +285,7 @@ config I2C_PARPORT
 	  This driver is a replacement for (and was inspired by) an older
 	  driver named i2c-philips-par.  The new driver supports more devices,
 	  and makes it easier to add support for new devices.
-
-	  An adapter type parameter is now mandatory.  Please read the file
-	  Documentation/i2c/busses/i2c-parport for details.
-
+	  
 	  Another driver exists, named i2c-parport-light, which doesn't depend
 	  on the parport driver.  This is meant for embedded systems. Don't say
 	  Y here if you intend to say Y or M there.
@@ -394,11 +390,10 @@ config SCx200_I2C_SDA
 	  also be specified with a module parameter.
 
 config SCx200_ACB
-	tristate "Geode ACCESS.bus support"
-	depends on X86_32 && I2C && PCI
+	tristate "NatSemi SCx200 ACCESS.bus"
+	depends on I2C && PCI
 	help
-	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
-	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+	  Enable the use of the ACCESS.bus controllers of a SCx200 processor.
 
 	  If you don't know what to do here, say N.
 
@@ -468,19 +463,19 @@ config I2C_VIA
 	  will be called i2c-via.
 
 config I2C_VIAPRO
-	tristate "VIA 82C596/82C686/823x"
+	tristate "VIA 82C596/82C686/82xx"
 	depends on I2C && PCI
 	help
 	  If you say yes to this option, support will be included for the VIA
-	  82C596/82C686/823x I2C interfaces.  Specifically, the following 
+	  82C596/82C686/82xx I2C interfaces.  Specifically, the following
 	  chipsets are supported:
-	  82C596A/B
-	  82C686A/B
-	  8231
-	  8233
-	  8233A
-	  8235
-	  8237
+	    VT82C596A/B
+	    VT82C686A/B
+	    VT8231
+	    VT8233/A
+	    VT8235
+	    VT8237R/A
+	    VT8251
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-viapro.