X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fi2c%2Fbusses%2Fi2c-piix4.c;fp=drivers%2Fi2c%2Fbusses%2Fi2c-piix4.c;h=30c7a1b38cbd7e5202106b8f060bb55a83f29e5d;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=692f473454813722d9a8cd676eb3d724265e2a72;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 692f47345..30c7a1b38 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
 /*
    Supports:
 	Intel PIIX4, 440MX
-	Serverworks OSB4, CSB5, CSB6
+	Serverworks OSB4, CSB5, CSB6, HT-1000
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -102,13 +102,6 @@ MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the PIIX4 at the given address. "
 		 "EXTREMELY DANGEROUS!");
 
-/* If fix_hstcfg is set to anything different from 0, we reset one of the
-   registers to be a valid value. */
-static int fix_hstcfg;
-module_param (fix_hstcfg, int, 0);
-MODULE_PARM_DESC(fix_hstcfg,
-		"Fix config register. Needed on some boards (Force CPCI735).");
-
 static int piix4_transaction(void);
 
 static unsigned short piix4_smba;
@@ -137,7 +130,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 	/* Don't access SMBus on IBM systems which get corrupted eeproms */
 	if (dmi_check_system(piix4_dmi_table) &&
 			PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
-		dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
+		dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
 			"may corrupt your serial eeprom! Refusing to load "
 			"module!\n");
 		return -EPERM;
@@ -166,22 +159,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 
 	pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
 
-	/* Some BIOS will set up the chipset incorrectly and leave a register
-	   in an undefined state (causing I2C to act very strangely). */
-	if (temp & 0x02) {
-		if (fix_hstcfg) {
-			dev_info(&PIIX4_dev->dev, "Working around buggy BIOS "
-					"(I2C)\n");
-			temp &= 0xfd;
-			pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp);
-		} else {
-			dev_info(&PIIX4_dev->dev, "Unusual config register "
-					"value\n");
-			dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if "
-					"you experience problems\n");
-		}
-	}
- 
 	/* If force_addr is set, we program the new address here. Just to make
 	   sure, we disable the PIIX4 first. */
 	if (force_addr) {
@@ -214,7 +191,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
 		}
 	}
 
-	if ((temp & 0x0E) == 8)
+	if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
 		dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n");
 	else if ((temp & 0x0E) == 0)
 		dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n");
@@ -399,7 +376,7 @@ static u32 piix4_func(struct i2c_adapter *adapter)
 	    I2C_FUNC_SMBUS_BLOCK_DATA;
 }
 
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer	= piix4_access,
 	.functionality	= piix4_func,
 };
@@ -413,12 +390,20 @@ static struct i2c_adapter piix4_adapter = {
 static struct pci_device_id piix4_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3),
 	  .driver_data = 3 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS),
+	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS),
+	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
 	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB),
+	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
 	  .driver_data = 3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),