X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fi2c%2Fbusses%2Fi2c-sis5595.c;h=b57ab74d23ecaa42c14ff8d0a22a225766ba7c12;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=9469ebf16d44f72e5796267e8c1371d21fb1b0fe;hpb=c7b5ebbddf7bcd3651947760f423e3783bbe6573;p=linux-2.6.git

diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 9469ebf16..b57ab74d2 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -55,7 +55,6 @@
  * Add adapter resets
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
@@ -124,11 +123,12 @@ static int blacklist[] = {
 
 /* If force_addr is set to anything different from 0, we forcibly enable
    the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
 module_param(force_addr, ushort, 0);
 MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
 
-static unsigned short sis5595_base = 0;
+static struct pci_driver sis5595_driver;
+static unsigned short sis5595_base;
 
 static u8 sis5595_read(u8 reg)
 {
@@ -173,7 +173,8 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
 
 	/* NB: We grab just the two SMBus registers here, but this may still
 	 * interfere with ACPI :-(  */
-	if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) {
+	if (!request_region(sis5595_base + SMB_INDEX, 2,
+			    sis5595_driver.name)) {
 		dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
 			sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
 		return -ENODEV;
@@ -181,9 +182,11 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
 
 	if (force_addr) {
 		dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base);
-		if (!pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base))
+		if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base)
+		    != PCIBIOS_SUCCESSFUL)
 			goto error;
-		if (!pci_read_config_word(SIS5595_dev, ACPI_BASE, &a))
+		if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a)
+		    != PCIBIOS_SUCCESSFUL)
 			goto error;
 		if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) {
 			/* doesn't work for some chips! */
@@ -192,13 +195,16 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev)
 		}
 	}
 
-	if (!pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val))
+	if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+	    != PCIBIOS_SUCCESSFUL)
 		goto error;
 	if ((val & 0x80) == 0) {
 		dev_info(&SIS5595_dev->dev, "enabling ACPI\n");
-		if (!pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80))
+		if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80)
+		    != PCIBIOS_SUCCESSFUL)
 			goto error;
-		if (!pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val))
+		if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val)
+		    != PCIBIOS_SUCCESSFUL)
 			goto error;
 		if ((val & 0x80) == 0) {
 			/* doesn't work for some chips? */
@@ -224,7 +230,7 @@ static int sis5595_transaction(struct i2c_adapter *adap)
 	/* Make sure the SMBus host is ready to start transmitting */
 	temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8);
 	if (temp != 0x00) {
-		dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting... \n", temp);
+		dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting...\n", temp);
 		sis5595_write(SMB_STS_LO, temp & 0xff);
 		sis5595_write(SMB_STS_HI, temp >> 8);
 		if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) {
@@ -353,8 +359,6 @@ static u32 sis5595_func(struct i2c_adapter *adapter)
 }
 
 static struct i2c_algorithm smbus_algorithm = {
-	.name		= "Non-I2C SMBus adapter",
-	.id		= I2C_ALGO_SMBUS,
 	.smbus_xfer	= sis5595_access,
 	.functionality	= sis5595_func,
 };
@@ -362,7 +366,6 @@ static struct i2c_algorithm smbus_algorithm = {
 static struct i2c_adapter sis5595_adapter = {
 	.owner		= THIS_MODULE,
 	.class          = I2C_CLASS_HWMON,
-	.name		= "unset",
 	.algo		= &smbus_algorithm,
 };
 
@@ -371,6 +374,8 @@ static struct pci_device_id sis5595_ids[] __devinitdata = {
 	{ 0, }
 };
 
+MODULE_DEVICE_TABLE (pci, sis5595_ids);
+
 static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	if (sis5595_setup(dev)) {
@@ -401,7 +406,7 @@ static struct pci_driver sis5595_driver = {
 
 static int __init i2c_sis5595_init(void)
 {
-	return pci_module_init(&sis5595_driver);
+	return pci_register_driver(&sis5595_driver);
 }
 
 static void __exit i2c_sis5595_exit(void)