X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fide%2Fppc%2Fpmac.c;h=91c5344a945d5375e14103743990d19ca86c6792;hb=refs%2Fheads%2Fvserver;hp=5013b1285e2242e24f8a8cf0215104c226bdffaf;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 5013b1285..91c5344a9 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/ide-pmac.c + * linux/drivers/ide/ppc/pmac.c * * Support for IDE interfaces on PowerMacs. * These IDE interfaces are memory-mapped and have a DBDMA channel @@ -22,7 +22,6 @@ * big table * */ -#include #include #include #include @@ -420,107 +419,6 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ -/* - * Below is the code for blinking the laptop LED along with hard - * disk activity. - */ - -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - -/* Set to 50ms minimum led-on time (also used to limit frequency - * of requests sent to the PMU - */ -#define PMU_HD_BLINK_TIME (HZ/50) - -static struct adb_request pmu_blink_on, pmu_blink_off; -static spinlock_t pmu_blink_lock; -static unsigned long pmu_blink_stoptime; -static int pmu_blink_ledstate; -static struct timer_list pmu_blink_timer; -static int pmu_ide_blink_enabled; - - -static void -pmu_hd_blink_timeout(unsigned long data) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_blink_lock, flags); - - /* We may have been triggered again in a racy way, check - * that we really want to switch it off - */ - if (time_after(pmu_blink_stoptime, jiffies)) - goto done; - - /* Previous req. not complete, try 100ms more */ - if (pmu_blink_off.complete == 0) - mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME); - else if (pmu_blink_ledstate) { - pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0); - pmu_blink_ledstate = 0; - } -done: - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static void -pmu_hd_kick_blink(void *data, int rw) -{ - unsigned long flags; - - pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME; - wmb(); - mod_timer(&pmu_blink_timer, pmu_blink_stoptime); - /* Fast path when LED is already ON */ - if (pmu_blink_ledstate == 1) - return; - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_on.complete && !pmu_blink_ledstate) { - pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1); - pmu_blink_ledstate = 1; - } - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static int -pmu_hd_blink_init(void) -{ - struct device_node *dt; - const char *model; - - /* Currently, I only enable this feature on KeyLargo based laptops, - * older laptops may support it (at least heathrow/paddington) but - * I don't feel like loading those venerable old machines with so - * much additional interrupt & PMU activity... - */ - if (pmu_get_model() != PMU_KEYLARGO_BASED) - return 0; - - dt = of_find_node_by_path("/"); - if (dt == NULL) - return 0; - model = (const char *)get_property(dt, "model", NULL); - if (model == NULL) - return 0; - if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 && - strncmp(model, "iBook", strlen("iBook")) != 0) { - of_node_put(dt); - return 0; - } - of_node_put(dt); - - pmu_blink_on.complete = 1; - pmu_blink_off.complete = 1; - spin_lock_init(&pmu_blink_lock); - init_timer(&pmu_blink_timer); - pmu_blink_timer.function = pmu_hd_blink_timeout; - - return 1; -} - -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - /* * N.B. this can't be an initfunc, because the media-bay task can * call ide_[un]register at any time. @@ -553,6 +451,8 @@ pmac_ide_init_hwif_ports(hw_regs_t *hw, if (irq != NULL) *irq = pmac_ide[ix].irq; + + hw->dev = &pmac_ide[ix].mdev->ofdev.dev; } #define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x))) @@ -1190,23 +1090,6 @@ pmac_ide_do_suspend(ide_hwif_t *hwif) pmif->timings[0] = 0; pmif->timings[1] = 0; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - /* Note: This code will be called for every hwif, thus we'll - * try several time to stop the LED blinker timer, but that - * should be harmless - */ - if (pmu_ide_blink_enabled) { - unsigned long flags; - - /* Make sure we don't hit the PMU blink */ - spin_lock_irqsave(&pmu_blink_lock, flags); - if (pmu_blink_ledstate) - del_timer(&pmu_blink_timer); - pmu_blink_ledstate = 0; - spin_unlock_irqrestore(&pmu_blink_lock, flags); - } -#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */ - disable_irq(pmif->irq); /* The media bay will handle itself just fine */ @@ -1271,7 +1154,7 @@ static int pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) { struct device_node *np = pmif->node; - int *bidp; + const int *bidp; pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; @@ -1293,14 +1176,14 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) pmif->broken_dma = 1; } - bidp = (int *)get_property(np, "AAPL,bus-id", NULL); + bidp = get_property(np, "AAPL,bus-id", NULL); pmif->aapl_bus_id = bidp ? *bidp : 0; /* Get cable type from device-tree */ if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6 || pmif->kind == controller_sh_ata6) { - char* cable = get_property(np, "cable-type", NULL); + const char* cable = get_property(np, "cable-type", NULL); if (cable && !strncmp(cable, "80-", 3)) pmif->cable_80 = 1; } @@ -1374,13 +1257,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->selectproc = pmac_ide_selectproc; hwif->speedproc = pmac_ide_tune_chipset; -#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK - pmu_ide_blink_enabled = pmu_hd_blink_init(); - - if (pmu_ide_blink_enabled) - hwif->led_act = pmu_hd_kick_blink; -#endif - printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hwif->irq); @@ -1450,7 +1326,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (macio_irq_count(mdev) == 0) { printk(KERN_WARNING "ide%d: no intrs for device %s, using 13\n", i, mdev->ofdev.node->full_name); - irq = 13; + irq = irq_create_mapping(NULL, 13); } else irq = macio_irq(mdev, 0); @@ -1493,15 +1369,16 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) } static int -pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t state) +pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) { ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); int rc = 0; - if (state.event != mdev->ofdev.dev.power.power_state.event && state.event >= PM_EVENT_SUSPEND) { + if (mesg.event != mdev->ofdev.dev.power.power_state.event + && mesg.event == PM_EVENT_SUSPEND) { rc = pmac_ide_do_suspend(hwif); if (rc == 0) - mdev->ofdev.dev.power.power_state = state; + mdev->ofdev.dev.power.power_state = mesg; } return rc; @@ -1597,15 +1474,16 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) } static int -pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t state) +pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev); int rc = 0; - if (state.event != pdev->dev.power.power_state.event && state.event >= 2) { + if (mesg.event != pdev->dev.power.power_state.event + && mesg.event == PM_EVENT_SUSPEND) { rc = pmac_ide_do_suspend(hwif); if (rc == 0) - pdev->dev.power.power_state = state; + pdev->dev.power.power_state = mesg; } return rc; @@ -1677,7 +1555,7 @@ MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match); void __init pmac_ide_probe(void) { - if (_machine != _MACH_Pmac) + if (!machine_is(powermac)) return; #ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST