X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fide%2Fsetup-pci.c;h=695e23904d3030e61c4f2ba24d88740415847a07;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=7ebf992e8c2f40f2050060ea2e3f8cd53d188436;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 7ebf992e8..695e23904 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -18,7 +18,6 @@
  *  configuration of all PCI IDE interfaces present in a system.  
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
@@ -102,7 +101,7 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char
 				return hwif;	/* pick an unused entry */
 		}
 	}
-	for (h = 0; h < 2; ++h) {
+	for (h = 0; h < 2 && h < MAX_HWIFS; ++h) {
 		hwif = ide_hwifs + h;
 		if (hwif->chipset == ide_unknown)
 			return hwif;	/* pick an unused entry */
@@ -580,7 +579,6 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
 	int port;
 	int at_least_one_hwif_enabled = 0;
 	ide_hwif_t *hwif, *mate = NULL;
-	static int secondpdc = 0;
 	u8 tmp;
 
 	index->all = 0xf0f0;
@@ -592,21 +590,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
 	for (port = 0; port <= 1; ++port) {
 		ide_pci_enablebit_t *e = &(d->enablebits[port]);
 	
-		/* 
-		 * If this is a Promise FakeRaid controller,
-		 * the 2nd controller will be marked as 
-		 * disabled while it is actually there and enabled
-		 * by the bios for raid purposes. 
-		 * Skip the normal "is it enabled" test for those.
-		 */
-		if ((d->flags & IDEPCI_FLAG_FORCE_PDC) &&
-		    (secondpdc++==1) && (port==1))
-			goto controller_ok;
-			
 		if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
 		    (tmp & e->mask) != e->val))
 			continue;	/* port not enabled */
-controller_ok:
 
 		if (d->channels	<= port)
 			break;
@@ -707,13 +693,8 @@ static int do_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d,
 				goto out;
 		}
 		if (noisy)
-#ifdef __sparc__
-			printk(KERN_INFO "%s: 100%% native mode on irq %s\n",
-			       d->name, __irq_itoa(pciirq));
-#else
 			printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
 				d->name, pciirq);
-#endif
 	}
 
 	/* FIXME: silent failure can happen */
@@ -813,24 +794,6 @@ int __ide_pci_register_driver(struct pci_driver *driver, struct module *module)
 
 EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
 
-/**
- *	ide_unregister_pci_driver	-	unregister an IDE driver
- *	@driver: driver to remove
- *
- *	Unregister a currently installed IDE driver. Returns are the same
- *	as for pci_unregister_driver
- */
- 
-void ide_pci_unregister_driver(struct pci_driver *driver)
-{
-	if(!pre_init)
-		pci_unregister_driver(driver);
-	else
-		list_del(&driver->node);
-}
-
-EXPORT_SYMBOL_GPL(ide_pci_unregister_driver);
-
 /**
  *	ide_scan_pcidev		-	find an IDE driver for a device
  *	@dev: PCI device to check
@@ -881,11 +844,11 @@ void __init ide_scan_pcibus (int scan_direction)
 
 	pre_init = 0;
 	if (!scan_direction) {
-		while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 			ide_scan_pcidev(dev);
 		}
 	} else {
-		while ((dev = pci_find_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 			ide_scan_pcidev(dev);
 		}
 	}