X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fieee1394%2Fpcilynx.c;h=e2edc41e1b6fc41873c74fab4655a58e69a01ccf;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=bdb3a85cafa68507a82616e88b55952f3ff0a057;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index bdb3a85ca..e2edc41e1 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -76,7 +76,7 @@
 
 
 /* Module Parameters */
-static int skip_eeprom = 0;
+static int skip_eeprom;
 module_param(skip_eeprom, int, 0444);
 MODULE_PARM_DESC(skip_eeprom, "Use generic bus info block instead of serial eeprom (default = 0).");
 
@@ -1422,7 +1422,7 @@ static int __devinit add_card(struct pci_dev *dev,
 		i = get_phy_reg(lynx, 4);
 		i |= PHY_04_LCTRL;
 		if (hpsb_disable_irm)
-			i &= !PHY_04_CONTENDER;
+			i &= ~PHY_04_CONTENDER;
 		else
 			i |= PHY_04_CONTENDER;
 		if (i != -1) set_phy_reg(lynx, 4, i);
@@ -1435,7 +1435,7 @@ static int __devinit add_card(struct pci_dev *dev,
         	struct i2c_algo_bit_data i2c_adapter_data;
 
         	error = -ENOMEM;
-		i2c_ad = kmalloc(sizeof(struct i2c_adapter), SLAB_KERNEL);
+		i2c_ad = kmalloc(sizeof(*i2c_ad), SLAB_KERNEL);
         	if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
 
 		memcpy(i2c_ad, &bit_ops, sizeof(struct i2c_adapter));
@@ -1464,26 +1464,6 @@ static int __devinit add_card(struct pci_dev *dev,
                                                   { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
                                                 };
 
-
-#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
-                        union i2c_smbus_data data;
-
-                        if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE,NULL))
-                                PRINT(KERN_ERR, lynx->id,"eeprom read start has failed");
-                        else
-                        {
-                                u16 addr;
-                                for (addr=0x00; addr < 0x100; addr++) {
-                                        if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE,& data)) {
-                                                PRINT(KERN_ERR, lynx->id, "unable to read i2c %x", addr);
-                                                break;
-                                        }
-                                        else
-                                                PRINT(KERN_DEBUG, lynx->id,"got serial eeprom data at %x: %x",addr, data.byte);
-                                }
-                        }
-#endif
-
                         /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we
                            do it more efficiently in one transaction rather then using several reads */
                         if (i2c_transfer(i2c_ad, msg, 2) < 0) {