X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Finfiniband%2Fhw%2Fipath%2Fipath_eeprom.c;h=a4019a6b75602c760ef5774ed2216cd33b9d6576;hb=refs%2Fheads%2Fvserver;hp=a2f1ceafcca9f67360d1187b8c58e9e5a813f3a0;hpb=16cf0ec7408f389279d413869e94c1a351392f97;p=linux-2.6.git

diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index a2f1ceafc..a4019a6b7 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
@@ -99,9 +100,9 @@ static int i2c_gpio_set(struct ipath_devdata *dd,
 	gpioval = &dd->ipath_gpio_out;
 	read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
 	if (line == i2c_line_scl)
-		mask = ipath_gpio_scl;
+		mask = dd->ipath_gpio_scl;
 	else
-		mask = ipath_gpio_sda;
+		mask = dd->ipath_gpio_sda;
 
 	if (new_line_state == i2c_line_high)
 		/* tri-state the output rather than force high */
@@ -118,12 +119,12 @@ static int i2c_gpio_set(struct ipath_devdata *dd,
 		write_val = 0x0UL;
 
 	if (line == i2c_line_scl) {
-		write_val <<= ipath_gpio_scl_num;
-		*gpioval = *gpioval & ~(1UL << ipath_gpio_scl_num);
+		write_val <<= dd->ipath_gpio_scl_num;
+		*gpioval = *gpioval & ~(1UL << dd->ipath_gpio_scl_num);
 		*gpioval |= write_val;
 	} else {
-		write_val <<= ipath_gpio_sda_num;
-		*gpioval = *gpioval & ~(1UL << ipath_gpio_sda_num);
+		write_val <<= dd->ipath_gpio_sda_num;
+		*gpioval = *gpioval & ~(1UL << dd->ipath_gpio_sda_num);
 		*gpioval |= write_val;
 	}
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_out, *gpioval);
@@ -156,9 +157,9 @@ static int i2c_gpio_get(struct ipath_devdata *dd,
 	read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
 	/* config line to be an input */
 	if (line == i2c_line_scl)
-		mask = ipath_gpio_scl;
+		mask = dd->ipath_gpio_scl;
 	else
-		mask = ipath_gpio_sda;
+		mask = dd->ipath_gpio_sda;
 	write_val = read_val & ~mask;
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, write_val);
 	read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
@@ -186,6 +187,7 @@ bail:
 static void i2c_wait_for_writes(struct ipath_devdata *dd)
 {
 	(void)ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+	rmb();
 }
 
 static void scl_out(struct ipath_devdata *dd, u8 bit)
@@ -600,8 +602,31 @@ void ipath_get_eeprom_info(struct ipath_devdata *dd)
 		guid = *(__be64 *) ifp->if_guid;
 	dd->ipath_guid = guid;
 	dd->ipath_nguid = ifp->if_numguid;
-	memcpy(dd->ipath_serial, ifp->if_serial,
-	       sizeof(ifp->if_serial));
+	/*
+	 * Things are slightly complicated by the desire to transparently
+	 * support both the Pathscale 10-digit serial number and the QLogic
+	 * 13-character version.
+	 */
+	if ((ifp->if_fversion > 1) && ifp->if_sprefix[0]
+		&& ((u8 *)ifp->if_sprefix)[0] != 0xFF) {
+		/* This board has a Serial-prefix, which is stored
+		 * elsewhere for backward-compatibility.
+		 */
+		char *snp = dd->ipath_serial;
+		int len;
+		memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
+		snp[sizeof ifp->if_sprefix] = '\0';
+		len = strlen(snp);
+		snp += len;
+		len = (sizeof dd->ipath_serial) - len;
+		if (len > sizeof ifp->if_serial) {
+			len = sizeof ifp->if_serial;
+		}
+		memcpy(snp, ifp->if_serial, len);
+	} else
+		memcpy(dd->ipath_serial, ifp->if_serial,
+		       sizeof ifp->if_serial);
+
 	ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
 		   (unsigned long long) be64_to_cpu(dd->ipath_guid));