X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fisdn%2Fgigaset%2Fbas-gigaset.c;fp=drivers%2Fisdn%2Fgigaset%2Fbas-gigaset.c;h=3845defd49010b840f781740ddbc7d5290e15f5d;hb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;hp=eb41aba3ddef4bdd72be0b2cbfc5f6aaf6ff8d1a;hpb=4e76c8a9fa413ccc09d3f7f664183dcce3555d57;p=linux-2.6.git diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index eb41aba3d..3845defd4 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -41,7 +41,6 @@ MODULE_PARM_DESC(cidmode, "Call-ID mode"); #define GIGASET_MINORS 1 #define GIGASET_MINOR 16 #define GIGASET_MODULENAME "bas_gigaset" -#define GIGASET_DEVFSNAME "gig/bas/" #define GIGASET_DEVNAME "ttyGB" /* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */ @@ -65,23 +64,22 @@ static struct usb_device_id gigaset_table [] = { MODULE_DEVICE_TABLE(usb, gigaset_table); -/*======================= local function prototypes =============================*/ +/*======================= local function prototypes ==========================*/ -/* This function is called if a new device is connected to the USB port. It - * checks whether this new device belongs to this driver. - */ +/* function called if a new device belonging to this driver is connected */ static int gigaset_probe(struct usb_interface *interface, const struct usb_device_id *id); /* Function will be called if the device is unplugged */ static void gigaset_disconnect(struct usb_interface *interface); -static void read_ctrl_callback(struct urb *, struct pt_regs *); +static int atread_submit(struct cardstate *, int); static void stopurbs(struct bas_bc_state *); +static int req_submit(struct bc_state *, int, int, int); static int atwrite_submit(struct cardstate *, unsigned char *, int); static int start_cbsend(struct cardstate *); -/*==============================================================================*/ +/*============================================================================*/ struct bas_cardstate { struct usb_device *udev; /* USB device pointer */ @@ -91,6 +89,7 @@ struct bas_cardstate { struct urb *urb_ctrl; /* control pipe default URB */ struct usb_ctrlrequest dr_ctrl; struct timer_list timer_ctrl; /* control request timeout */ + int retry_ctrl; struct timer_list timer_atrdy; /* AT command ready timeout */ struct urb *urb_cmd_out; /* for sending AT commands */ @@ -307,6 +306,7 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) * hang up any existing connection because of an unrecoverable error * This function may be called from any context and takes care of scheduling * the necessary actions for execution outside of interrupt context. + * cs->lock must not be held. * argument: * B channel control structure */ @@ -325,14 +325,17 @@ static inline void error_hangup(struct bc_state *bcs) /* error_reset * reset Gigaset device because of an unrecoverable error - * This function may be called from any context, and should take care of + * This function may be called from any context, and takes care of * scheduling the necessary actions for execution outside of interrupt context. - * Right now, it just generates a kernel message calling for help. + * cs->lock must not be held. * argument: * controller state structure */ static inline void error_reset(struct cardstate *cs) { + /* close AT command channel to recover (ignore errors) */ + req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT); + //FIXME try to recover without bothering the user dev_err(cs->dev, "unrecoverable error - please disconnect Gigaset base to reset\n"); @@ -403,14 +406,30 @@ static void cmd_in_timeout(unsigned long data) { struct cardstate *cs = (struct cardstate *) data; struct bas_cardstate *ucs = cs->hw.bas; + int rc; if (!ucs->rcvbuf_size) { gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__); return; } - dev_err(cs->dev, "timeout reading AT response\n"); - error_reset(cs); //FIXME retry? + if (ucs->retry_cmd_in++ < BAS_RETRY) { + dev_notice(cs->dev, "control read: timeout, retry %d\n", + ucs->retry_cmd_in); + rc = atread_submit(cs, BAS_TIMEOUT); + if (rc >= 0 || rc == -ENODEV) + /* resubmitted or disconnected */ + /* - bypass regular exit block */ + return; + } else { + dev_err(cs->dev, + "control read: timeout, giving up after %d tries\n", + ucs->retry_cmd_in); + } + kfree(ucs->rcvbuf); + ucs->rcvbuf = NULL; + ucs->rcvbuf_size = 0; + error_reset(cs); } /* set/clear bits in base connection state, return previous state @@ -428,6 +447,96 @@ inline static int update_basstate(struct bas_cardstate *ucs, return state; } +/* read_ctrl_callback + * USB completion handler for control pipe input + * called by the USB subsystem in interrupt context + * parameter: + * urb USB request block + * urb->context = inbuf structure for controller state + */ +static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs) +{ + struct inbuf_t *inbuf = urb->context; + struct cardstate *cs = inbuf->cs; + struct bas_cardstate *ucs = cs->hw.bas; + int have_data = 0; + unsigned numbytes; + int rc; + + update_basstate(ucs, 0, BS_ATRDPEND); + + if (!ucs->rcvbuf_size) { + dev_warn(cs->dev, "%s: no receive in progress\n", __func__); + return; + } + + del_timer(&ucs->timer_cmd_in); + + switch (urb->status) { + case 0: /* normal completion */ + numbytes = urb->actual_length; + if (unlikely(numbytes != ucs->rcvbuf_size)) { + dev_warn(cs->dev, + "control read: received %d chars, expected %d\n", + numbytes, ucs->rcvbuf_size); + if (numbytes > ucs->rcvbuf_size) + numbytes = ucs->rcvbuf_size; + } + + /* copy received bytes to inbuf */ + have_data = gigaset_fill_inbuf(inbuf, ucs->rcvbuf, numbytes); + + if (unlikely(numbytes < ucs->rcvbuf_size)) { + /* incomplete - resubmit for remaining bytes */ + ucs->rcvbuf_size -= numbytes; + ucs->retry_cmd_in = 0; + rc = atread_submit(cs, BAS_TIMEOUT); + if (rc >= 0 || rc == -ENODEV) + /* resubmitted or disconnected */ + /* - bypass regular exit block */ + return; + error_reset(cs); + } + break; + + case -ENOENT: /* cancelled */ + case -ECONNRESET: /* cancelled (async) */ + case -EINPROGRESS: /* pending */ + case -ENODEV: /* device removed */ + case -ESHUTDOWN: /* device shut down */ + /* no action necessary */ + gig_dbg(DEBUG_USBREQ, "%s: %s", + __func__, get_usb_statmsg(urb->status)); + break; + + default: /* severe trouble */ + dev_warn(cs->dev, "control read: %s\n", + get_usb_statmsg(urb->status)); + if (ucs->retry_cmd_in++ < BAS_RETRY) { + dev_notice(cs->dev, "control read: retry %d\n", + ucs->retry_cmd_in); + rc = atread_submit(cs, BAS_TIMEOUT); + if (rc >= 0 || rc == -ENODEV) + /* resubmitted or disconnected */ + /* - bypass regular exit block */ + return; + } else { + dev_err(cs->dev, + "control read: giving up after %d tries\n", + ucs->retry_cmd_in); + } + error_reset(cs); + } + + kfree(ucs->rcvbuf); + ucs->rcvbuf = NULL; + ucs->rcvbuf_size = 0; + if (have_data) { + gig_dbg(DEBUG_INTR, "%s-->BH", __func__); + gigaset_schedule_event(cs); + } +} + /* atread_submit * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout * parameters: @@ -466,7 +575,7 @@ static int atread_submit(struct cardstate *cs, int timeout) if ((ret = usb_submit_urb(ucs->urb_cmd_in, SLAB_ATOMIC)) != 0) { update_basstate(ucs, 0, BS_ATRDPEND); dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n", - get_usb_statmsg(ret)); + get_usb_rcmsg(ret)); return ret; } @@ -611,9 +720,12 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs) kfree(ucs->rcvbuf); ucs->rcvbuf = NULL; ucs->rcvbuf_size = 0; - if (rc != -ENODEV) + if (rc != -ENODEV) { //FIXME corrective action? + spin_unlock_irqrestore(&cs->lock, flags); error_reset(cs); + break; + } } spin_unlock_irqrestore(&cs->lock, flags); break; @@ -643,97 +755,6 @@ resubmit: } } -/* read_ctrl_callback - * USB completion handler for control pipe input - * called by the USB subsystem in interrupt context - * parameter: - * urb USB request block - * urb->context = inbuf structure for controller state - */ -static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs) -{ - struct inbuf_t *inbuf = urb->context; - struct cardstate *cs = inbuf->cs; - struct bas_cardstate *ucs = cs->hw.bas; - int have_data = 0; - unsigned numbytes; - int rc; - - update_basstate(ucs, 0, BS_ATRDPEND); - - if (!ucs->rcvbuf_size) { - dev_warn(cs->dev, "%s: no receive in progress\n", __func__); - return; - } - - del_timer(&ucs->timer_cmd_in); - - switch (urb->status) { - case 0: /* normal completion */ - numbytes = urb->actual_length; - if (unlikely(numbytes == 0)) { - dev_warn(cs->dev, - "control read: empty block received\n"); - goto retry; - } - if (unlikely(numbytes != ucs->rcvbuf_size)) { - dev_warn(cs->dev, - "control read: received %d chars, expected %d\n", - numbytes, ucs->rcvbuf_size); - if (numbytes > ucs->rcvbuf_size) - numbytes = ucs->rcvbuf_size; - } - - /* copy received bytes to inbuf */ - have_data = gigaset_fill_inbuf(inbuf, ucs->rcvbuf, numbytes); - - if (unlikely(numbytes < ucs->rcvbuf_size)) { - /* incomplete - resubmit for remaining bytes */ - ucs->rcvbuf_size -= numbytes; - ucs->retry_cmd_in = 0; - goto retry; - } - break; - - case -ENOENT: /* cancelled */ - case -ECONNRESET: /* cancelled (async) */ - case -EINPROGRESS: /* pending */ - case -ENODEV: /* device removed */ - case -ESHUTDOWN: /* device shut down */ - /* no action necessary */ - gig_dbg(DEBUG_USBREQ, "%s: %s", - __func__, get_usb_statmsg(urb->status)); - break; - - default: /* severe trouble */ - dev_warn(cs->dev, "control read: %s\n", - get_usb_statmsg(urb->status)); - retry: - if (ucs->retry_cmd_in++ < BAS_RETRY) { - dev_notice(cs->dev, "control read: retry %d\n", - ucs->retry_cmd_in); - rc = atread_submit(cs, BAS_TIMEOUT); - if (rc >= 0 || rc == -ENODEV) - /* resubmitted or disconnected */ - /* - bypass regular exit block */ - return; - } else { - dev_err(cs->dev, - "control read: giving up after %d tries\n", - ucs->retry_cmd_in); - } - error_reset(cs); - } - - kfree(ucs->rcvbuf); - ucs->rcvbuf = NULL; - ucs->rcvbuf_size = 0; - if (have_data) { - gig_dbg(DEBUG_INTR, "%s-->BH", __func__); - gigaset_schedule_event(cs); - } -} - /* read_iso_callback * USB completion handler for B channel isochronous input * called by the USB subsystem in interrupt context @@ -1378,6 +1399,7 @@ static void req_timeout(unsigned long data) case HD_CLOSE_B1CHANNEL: dev_err(bcs->cs->dev, "timeout closing channel %d\n", bcs->channel + 1); + error_reset(bcs->cs); break; default: @@ -1396,22 +1418,61 @@ static void req_timeout(unsigned long data) static void write_ctrl_callback(struct urb *urb, struct pt_regs *regs) { struct bas_cardstate *ucs = urb->context; + int rc; unsigned long flags; - spin_lock_irqsave(&ucs->lock, flags); - if (urb->status && ucs->pending) { - dev_err(&ucs->interface->dev, - "control request 0x%02x failed: %s\n", - ucs->pending, get_usb_statmsg(urb->status)); - del_timer(&ucs->timer_ctrl); - ucs->pending = 0; - } - /* individual handling of specific request types */ - switch (ucs->pending) { - case HD_DEVICE_INIT_ACK: /* no reply expected */ - ucs->pending = 0; + /* check status */ + switch (urb->status) { + case 0: /* normal completion */ + spin_lock_irqsave(&ucs->lock, flags); + switch (ucs->pending) { + case HD_DEVICE_INIT_ACK: /* no reply expected */ + del_timer(&ucs->timer_ctrl); + ucs->pending = 0; + break; + } + spin_unlock_irqrestore(&ucs->lock, flags); + return; + + case -ENOENT: /* cancelled */ + case -ECONNRESET: /* cancelled (async) */ + case -EINPROGRESS: /* pending */ + case -ENODEV: /* device removed */ + case -ESHUTDOWN: /* device shut down */ + /* ignore silently */ + gig_dbg(DEBUG_USBREQ, "%s: %s", + __func__, get_usb_statmsg(urb->status)); break; + + default: /* any failure */ + if (++ucs->retry_ctrl > BAS_RETRY) { + dev_err(&ucs->interface->dev, + "control request 0x%02x failed: %s\n", + ucs->dr_ctrl.bRequest, + get_usb_statmsg(urb->status)); + break; /* give up */ + } + dev_notice(&ucs->interface->dev, + "control request 0x%02x: %s, retry %d\n", + ucs->dr_ctrl.bRequest, get_usb_statmsg(urb->status), + ucs->retry_ctrl); + /* urb->dev is clobbered by USB subsystem */ + urb->dev = ucs->udev; + rc = usb_submit_urb(urb, SLAB_ATOMIC); + if (unlikely(rc)) { + dev_err(&ucs->interface->dev, + "could not resubmit request 0x%02x: %s\n", + ucs->dr_ctrl.bRequest, get_usb_rcmsg(rc)); + break; + } + /* resubmitted */ + return; } + + /* failed, clear pending request */ + spin_lock_irqsave(&ucs->lock, flags); + del_timer(&ucs->timer_ctrl); + ucs->pending = 0; spin_unlock_irqrestore(&ucs->lock, flags); } @@ -1455,9 +1516,11 @@ static int req_submit(struct bc_state *bcs, int req, int val, int timeout) usb_sndctrlpipe(ucs->udev, 0), (unsigned char*) &ucs->dr_ctrl, NULL, 0, write_ctrl_callback, ucs); - if ((ret = usb_submit_urb(ucs->urb_ctrl, SLAB_ATOMIC)) != 0) { + ucs->retry_ctrl = 0; + ret = usb_submit_urb(ucs->urb_ctrl, SLAB_ATOMIC); + if (unlikely(ret)) { dev_err(bcs->cs->dev, "could not submit request 0x%02x: %s\n", - req, get_usb_statmsg(ret)); + req, get_usb_rcmsg(ret)); spin_unlock_irqrestore(&ucs->lock, flags); return ret; } @@ -2285,8 +2348,7 @@ static int __init bas_gigaset_init(void) /* allocate memory for our driver state and intialize it */ if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS, GIGASET_MODULENAME, GIGASET_DEVNAME, - GIGASET_DEVFSNAME, &gigops, - THIS_MODULE)) == NULL) + &gigops, THIS_MODULE)) == NULL) goto error; /* allocate memory for our device state and intialize it */