X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fisdn%2Fhisax%2Fsedlbauer.c;h=030d1625c5c6d78c88cc2db80974c86ffd6c5ed9;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=8c044a6a7fe3b1e6567a5926f99d71932dee4494;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 8c044a6a7..030d1625c 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -39,7 +39,6 @@
 */
 
 #include <linux/init.h>
-#include <linux/config.h>
 #include "hisax.h"
 #include "isac.h"
 #include "ipac.h"
@@ -261,7 +260,7 @@ WriteISAR(struct IsdnCardState *cs, int mode, u_char offset, u_char value)
 #include "hscx_irq.c"
 
 static irqreturn_t
-sedlbauer_interrupt(int intno, void *dev_id, struct pt_regs *regs)
+sedlbauer_interrupt(int intno, void *dev_id)
 {
 	struct IsdnCardState *cs = dev_id;
 	u_char val;
@@ -307,7 +306,7 @@ sedlbauer_interrupt(int intno, void *dev_id, struct pt_regs *regs)
 }
 
 static irqreturn_t
-sedlbauer_interrupt_ipac(int intno, void *dev_id, struct pt_regs *regs)
+sedlbauer_interrupt_ipac(int intno, void *dev_id)
 {
 	struct IsdnCardState *cs = dev_id;
 	u_char ista, val, icnt = 5;
@@ -354,7 +353,7 @@ Start_IPAC:
 }
 
 static irqreturn_t
-sedlbauer_interrupt_isar(int intno, void *dev_id, struct pt_regs *regs)
+sedlbauer_interrupt_isar(int intno, void *dev_id)
 {
 	struct IsdnCardState *cs = dev_id;
 	u_char val;
@@ -633,7 +632,7 @@ setup_sedlbauer(struct IsdnCard *card)
 			printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
 			return(0);
 		}
-		cs->irq_flags |= SA_SHIRQ;
+		cs->irq_flags |= IRQF_SHARED;
 		cs->hw.sedl.bus = SEDL_BUS_PCI;
 		sub_vendor_id = dev_sedl->subsystem_vendor;
 		sub_id = dev_sedl->subsystem_device;
@@ -678,7 +677,11 @@ setup_sedlbauer(struct IsdnCard *card)
 		return (0);
 #endif /* CONFIG_PCI */
 	}	
+
+#ifdef __ISAPNP__
 ready:	
+#endif
+
 	/* In case of the sedlbauer pcmcia card, this region is in use,
 	 * reserved for us by the card manager. So we do not check it
 	 * here, it would fail.
@@ -810,7 +813,7 @@ ready:
 				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
 				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
 				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
-				cs->irq_flags |= SA_SHIRQ;
+				cs->irq_flags |= IRQF_SHARED;
 			} else {
 				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
 				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;