X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmacintosh%2FKconfig;fp=drivers%2Fmacintosh%2FKconfig;h=12ad462737ba59ba55f3b76a6f2e04167524df1b;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=8a7117a08cf09a44b712eff882ab175150ecd537;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 8a7117a08..12ad46273 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -4,7 +4,7 @@ menu "Macintosh device drivers"
 
 config ADB
 	bool "Apple Desktop Bus (ADB) support"
-	depends on MAC || PPC_PMAC
+	depends on MAC || (PPC_PMAC && PPC32)
 	help
 	  Apple Desktop Bus (ADB) support is for support of devices which
 	  are connected to an ADB port.  ADB devices tend to have 4 pins.
@@ -86,39 +86,24 @@ config PMAC_SMU
 	  on the "SMU" system control chip which replaces the old PMU.
 	  If you don't know, say Y.
 
-config PMAC_PBOOK
-	bool "Power management support for PowerBooks"
-	depends on ADB_PMU
-	---help---
-	  This provides support for putting a PowerBook to sleep; it also
-	  enables media bay support.  Power management works on the
-	  PB2400/3400/3500, Wallstreet, Lombard, and Bronze PowerBook G3 and
-	  the Titanium Powerbook G4, as well as the iBooks.  You should get
-	  the power management daemon, pmud, to make it work and you must have
-	  the /dev/pmu device (see the pmud README).
-
-	  Get pmud from <ftp://ftp.samba.org/pub/ppclinux/pmud/>.
-
-	  If you have a PowerBook, you should say Y here.
-
-	  You may also want to compile the dma sound driver as a module and
-	  have it autoloaded. The act of removing the module shuts down the
-	  sound hardware for more power savings.
-
-config PM
-	bool
-	depends on PPC_PMAC && ADB_PMU && PMAC_PBOOK
-	default y
-
 config PMAC_APM_EMU
 	tristate "APM emulation"
-	depends on PMAC_PBOOK
+	depends on PPC_PMAC && PPC32 && PM
+
+config PMAC_MEDIABAY
+	bool "Support PowerBook hotswap media bay"
+	depends on PPC_PMAC && PPC32
+	help
+	  This option adds support for older PowerBook's hotswap media bay
+	  that can contains batteries, floppy drives, or IDE devices. PCI
+	  devices are not fully supported in the bay as I never had one to
+	  try with
 
 # made a separate option since backlight may end up beeing used
 # on non-powerbook machines (but only on PMU based ones AFAIK)
 config PMAC_BACKLIGHT
 	bool "Backlight control for LCD screens"
-	depends on ADB_PMU
+	depends on ADB_PMU && (BROKEN || !PPC64)
 	help
 	  Say Y here to build in code to manage the LCD backlight on a
 	  Macintosh PowerBook.  With this code, the backlight will be turned
@@ -126,13 +111,6 @@ config PMAC_BACKLIGHT
 	  events; also, the PowerBook button device will be enabled so you can
 	  change the screen brightness.
 
-config MAC_SERIAL
-	tristate "Support for PowerMac serial ports (OBSOLETE DRIVER)"
-	depends on PPC_PMAC && BROKEN
-	help
-	  This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
-	  "Character devices --> Serial drivers --> PowerMac z85c30" option.
-
 config ADB_MACIO
 	bool "Include MacIO (CHRP) ADB driver"
 	depends on ADB && PPC_CHRP && !PPC_PMAC64
@@ -171,14 +149,14 @@ config MAC_EMUMOUSEBTN
 
 config THERM_WINDTUNNEL
 	tristate "Support for thermal management on Windtunnel G4s"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 	help
 	  This driver provides some thermostat and fan control for the desktop
 	  G4 "Windtunnel"
 
 config THERM_ADT746X
 	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 	help
 	  This driver provides some thermostat and fan control for the
           iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
@@ -186,11 +164,38 @@ config THERM_ADT746X
 
 config THERM_PM72
 	tristate "Support for thermal management on PowerMac G5"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC64
 	help
 	  This driver provides thermostat and fan control for the desktop
 	  G5 machines. 
 
+config WINDFARM
+	tristate "New PowerMac thermal control infrastructure"
+
+config WINDFARM_PM81
+	tristate "Support for thermal management on iMac G5"
+	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+	select I2C_POWERMAC
+	help
+	  This driver provides thermal control for the iMacG5
+
+config WINDFARM_PM91
+	tristate "Support for thermal management on PowerMac9,1"
+	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
+	select I2C_POWERMAC
+	help
+	  This driver provides thermal control for the PowerMac9,1
+          which is the recent (SMU based) single CPU desktop G5
+
+config WINDFARM_PM112
+	tristate "Support for thermal management on PowerMac11,2"
+	depends on WINDFARM && I2C && PMAC_SMU
+	select I2C_POWERMAC
+	help
+	  This driver provides thermal control for the PowerMac11,2
+	  which are the recent dual and quad G5 machines using the
+	  970MP dual-core processor.
+
 config ANSLCD
 	tristate "Support for ANS LCD display"
 	depends on ADB_CUDA && PPC_PMAC