X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmedia%2Fdvb%2Ffrontends%2Fmt312.h;h=1f58f0c9d110e5f5b04ddc1628ce831b4fa07e08;hb=6a77f38946aaee1cd85eeec6cf4229b204c15071;hp=222c6ecbd0cc649cdf9aaac40cd3fee55604e913;hpb=87fc8d1bb10cd459024a742c6a10961fefcef18f;p=linux-2.6.git

diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
index 222c6ecbd..1f58f0c9d 100644
--- a/drivers/media/dvb/frontends/mt312.h
+++ b/drivers/media/dvb/frontends/mt312.h
@@ -1,5 +1,5 @@
 /* 
-    Driver for Zarlink MT312 QPSK Frontend
+    Driver for Zarlink MT312 Satellite Channel Decoder
 
     Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
 
@@ -18,145 +18,30 @@
     along with this program; if not, write to the Free Software
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 
+    References:
+    http://products.zarlink.com/product_profiles/MT312.htm
+    http://products.zarlink.com/product_profiles/SL1935.htm
 */
 
-#ifndef _DVB_FRONTENDS_MT312
-#define _DVB_FRONTENDS_MT312
+#ifndef MT312_H
+#define MT312_H
 
-enum mt312_reg_addr {
-	QPSK_INT_H = 0,
-	QPSK_INT_M = 1,
-	QPSK_INT_L = 2,
-	FEC_INT = 3,
-	QPSK_STAT_H = 4,
-	QPSK_STAT_L = 5,
-	FEC_STATUS = 6,
-	LNB_FREQ_H = 7,
-	LNB_FREQ_L = 8,
-	M_SNR_H = 9,
-	M_SNR_L = 10,
-	VIT_ERRCNT_H = 11,
-	VIT_ERRCNT_M = 12,
-	VIT_ERRCNT_L = 13,
-	RS_BERCNT_H = 14,
-	RS_BERCNT_M = 15,
-	RS_BERCNT_L = 16,
-	RS_UBC_H = 17,
-	RS_UBC_L = 18,
-	SIG_LEVEL = 19,
-	GPP_CTRL = 20,
-	RESET = 21,
-	DISEQC_MODE = 22,
-	SYM_RATE_H = 23,
-	SYM_RATE_L = 24,
-	VIT_MODE = 25,
-	QPSK_CTRL = 26,
-	GO = 27,
-	IE_QPSK_H = 28,
-	IE_QPSK_M = 29,
-	IE_QPSK_L = 30,
-	IE_FEC = 31,
-	QPSK_STAT_EN = 32,
-	FEC_STAT_EN = 33,
-	SYS_CLK = 34,
-	DISEQC_RATIO = 35,
-	DISEQC_INSTR = 36,
-	FR_LIM = 37,
-	FR_OFF = 38,
-	AGC_CTRL = 39,
-	AGC_INIT = 40,
-	AGC_REF = 41,
-	AGC_MAX = 42,
-	AGC_MIN = 43,
-	AGC_LK_TH = 44,
-	TS_AGC_LK_TH = 45,
-	AGC_PWR_SET = 46,
-	QPSK_MISC = 47,
-	SNR_THS_LOW = 48,
-	SNR_THS_HIGH = 49,
-	TS_SW_RATE = 50,
-	TS_SW_LIM_L = 51,
-	TS_SW_LIM_H = 52,
-	CS_SW_RATE_1 = 53,
-	CS_SW_RATE_2 = 54,
-	CS_SW_RATE_3 = 55,
-	CS_SW_RATE_4 = 56,
-	CS_SW_LIM = 57,
-	TS_LPK = 58,
-	TS_LPK_M = 59,
-	TS_LPK_L = 60,
-	CS_KPROP_H = 61,
-	CS_KPROP_L = 62,
-	CS_KINT_H = 63,
-	CS_KINT_L = 64,
-	QPSK_SCALE = 65,
-	TLD_OUTCLK_TH = 66,
-	TLD_INCLK_TH = 67,
-	FLD_TH = 68,
-	PLD_OUTLK3 = 69,
-	PLD_OUTLK2 = 70,
-	PLD_OUTLK1 = 71,
-	PLD_OUTLK0 = 72,
-	PLD_INLK3 = 73,
-	PLD_INLK2 = 74,
-	PLD_INLK1 = 75,
-	PLD_INLK0 = 76,
-	PLD_ACC_TIME = 77,
-	SWEEP_PAR = 78,
-	STARTUP_TIME = 79,
-	LOSSLOCK_TH = 80,
-	FEC_LOCK_TM = 81,
-	LOSSLOCK_TM = 82,
-	VIT_ERRPER_H = 83,
-	VIT_ERRPER_M = 84,
-	VIT_ERRPER_L = 85,
-	VIT_SETUP = 86,
-	VIT_REF0 = 87,
-	VIT_REF1 = 88,
-	VIT_REF2 = 89,
-	VIT_REF3 = 90,
-	VIT_REF4 = 91,
-	VIT_REF5 = 92,
-	VIT_REF6 = 93,
-	VIT_MAXERR = 94,
-	BA_SETUPT = 95,
-	OP_CTRL = 96,
-	FEC_SETUP = 97,
-	PROG_SYNC = 98,
-	AFC_SEAR_TH = 99,
-	CSACC_DIF_TH = 100,
-	QPSK_LK_CT = 101,
-	QPSK_ST_CT = 102,
-	MON_CTRL = 103,
-	QPSK_RESET = 104,
-	QPSK_TST_CT = 105,
-	QPSK_TST_ST = 106,
-	TEST_R = 107,
-	AGC_H = 108,
-	AGC_M = 109,
-	AGC_L = 110,
-	FREQ_ERR1_H = 111,
-	FREQ_ERR1_M = 112,
-	FREQ_ERR1_L = 113,
-	FREQ_ERR2_H = 114,
-	FREQ_ERR2_L = 115,
-	SYM_RAT_OP_H = 116,
-	SYM_RAT_OP_L = 117,
-	DESEQC2_INT = 118,
-	DISEQC2_STAT = 119,
-	DISEQC2_FIFO = 120,
-	DISEQC2_CTRL1 = 121,
-	DISEQC2_CTRL2 = 122,
-	MONITOR_H = 123,
-	MONITOR_L = 124,
-	TEST_MODE = 125,
-	ID = 126,
-	CONFIG = 127
-};
+#include <linux/dvb/frontend.h>
+
+struct mt312_config
+{
+	/* the demodulator's i2c address */
+	u8 demod_address;
 
-enum mt312_model_id {
-	ID_VP310 = 1,
-	ID_MT312 = 3
+	/* PLL maintenance */
+	int (*pll_init)(struct dvb_frontend* fe);
+	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
 };
 
-#endif				/* DVB_FRONTENDS_MT312 */
+extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
+					 struct i2c_adapter* i2c);
+
+extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
+					 struct i2c_adapter* i2c);
+
+#endif // MT312_H