X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmedia%2Fdvb%2Fttpci%2Fbudget-av.c;h=8a7cd7d505cf533997dc76f2613f5e98a1d0c0d8;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=6e0f5d307c52de21c56ce2fa499272a85a6ed801;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 6e0f5d307..8a7cd7d50 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -37,6 +37,7 @@ #include "stv0299.h" #include "tda10021.h" #include "tda1004x.h" +#include "dvb-pll.h" #include #include #include @@ -59,11 +60,11 @@ struct budget_av { struct dvb_ca_en50221 ca; }; -/* GPIO CI Connections: - * 0 - Vcc/Reset (Reset is controlled by capacitor) - * 1 - Attribute Memory - * 2 - Card Enable (Active Low) - * 3 - Card Detect +/* GPIO Connections: + * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*! + * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory + * 2 - CI Card Enable (Active Low) + * 3 - CI Card Detect */ /**************************************************************************** @@ -127,7 +128,7 @@ static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int ad saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); udelay(1); - result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0); + result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1); if (result == -ETIMEDOUT) budget_av->slot_status = 0; @@ -145,7 +146,7 @@ static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int a saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI); udelay(1); - result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0); + result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1); if (result == -ETIMEDOUT) budget_av->slot_status = 0; @@ -213,11 +214,13 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d) msleep(100); + /* reinitialise the frontend */ + dvb_frontend_reinitialise(budget_av->budget.dvb_frontend); + if (timeout <= 0) { printk(KERN_ERR "budget-av: cam reset failed (timeout).\n"); saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ return -ETIMEDOUT; } @@ -257,26 +260,43 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open { struct budget_av *budget_av = (struct budget_av *) ca->data; struct saa7146_dev *saa = budget_av->budget.dev; + int cam_present = 0; if (slot != 0) return -EINVAL; - if (!budget_av->slot_status) { + if (!budget_av->slot_status) + { + // first of all test the card detect line saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); udelay(1); if (saa7146_read(saa, PSR) & MASK_06) { + cam_present = 1; + } + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); + + // that is unreliable however, so try and read from IO memory + if (!cam_present) + { + saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); + if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) != -ETIMEDOUT) + { + cam_present = 1; + } + } + + // did we find something? + if (cam_present) { printk(KERN_INFO "budget-av: cam inserted\n"); budget_av->slot_status = 1; } - saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); } else if (!open) { saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT) { printk(KERN_INFO "budget-av: cam ejected\n"); saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ budget_av->slot_status = 0; } } @@ -453,9 +473,9 @@ static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 sra } static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe, + struct i2c_adapter *i2c, struct dvb_frontend_parameters *params) { - struct budget_av *budget_av = (struct budget_av *) fe->dvb->priv; u32 div; u8 buf[4]; struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; @@ -481,8 +501,142 @@ static int philips_su1278_ty_ci_pll_set(struct dvb_frontend *fe, else if (params->frequency < 2150000) buf[3] |= 0xC0; - if (i2c_transfer(&budget_av->budget.i2c_adap, &msg, 1) != 1) + if (i2c_transfer(i2c, &msg, 1) != 1) + return -EIO; + return 0; +} + +#define MIN2(a,b) ((a) < (b) ? (a) : (b)) +#define MIN3(a,b,c) MIN2(MIN2(a,b),c) + +static int philips_su1278sh2_tua6100_pll_set(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dvb_frontend_parameters *params) +{ + u8 reg0 [2] = { 0x00, 0x00 }; + u8 reg1 [4] = { 0x01, 0x00, 0x00, 0x00 }; + u8 reg2 [3] = { 0x02, 0x00, 0x00 }; + int _fband; + int first_ZF; + int R, A, N, P, M; + struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = NULL,.len = 0 }; + int freq = params->frequency; + + first_ZF = (freq) / 1000; + + if (abs(MIN2(abs(first_ZF-1190),abs(first_ZF-1790))) < + abs(MIN3(abs(first_ZF-1202),abs(first_ZF-1542),abs(first_ZF-1890)))) + _fband = 2; + else + _fband = 3; + + if (_fband == 2) { + if (((first_ZF >= 950) && (first_ZF < 1350)) || + ((first_ZF >= 1430) && (first_ZF < 1950))) + reg0[1] = 0x07; + else if (((first_ZF >= 1350) && (first_ZF < 1430)) || + ((first_ZF >= 1950) && (first_ZF < 2150))) + reg0[1] = 0x0B; + } + + if(_fband == 3) { + if (((first_ZF >= 950) && (first_ZF < 1350)) || + ((first_ZF >= 1455) && (first_ZF < 1950))) + reg0[1] = 0x07; + else if (((first_ZF >= 1350) && (first_ZF < 1420)) || + ((first_ZF >= 1950) && (first_ZF < 2150))) + reg0[1] = 0x0B; + else if ((first_ZF >= 1420) && (first_ZF < 1455)) + reg0[1] = 0x0F; + } + + if (first_ZF > 1525) + reg1[1] |= 0x80; + else + reg1[1] &= 0x7F; + + if (_fband == 2) { + if (first_ZF > 1430) { /* 1430MHZ */ + reg1[1] &= 0xCF; /* N2 */ + reg2[1] &= 0xCF; /* R2 */ + reg2[1] |= 0x10; + } else { + reg1[1] &= 0xCF; /* N2 */ + reg1[1] |= 0x20; + reg2[1] &= 0xCF; /* R2 */ + reg2[1] |= 0x10; + } + } + + if (_fband == 3) { + if ((first_ZF >= 1455) && + (first_ZF < 1630)) { + reg1[1] &= 0xCF; /* N2 */ + reg1[1] |= 0x20; + reg2[1] &= 0xCF; /* R2 */ + } else { + if (first_ZF < 1455) { + reg1[1] &= 0xCF; /* N2 */ + reg1[1] |= 0x20; + reg2[1] &= 0xCF; /* R2 */ + reg2[1] |= 0x10; + } else { + if (first_ZF >= 1630) { + reg1[1] &= 0xCF; /* N2 */ + reg2[1] &= 0xCF; /* R2 */ + reg2[1] |= 0x10; + } + } + } + } + + /* set ports, enable P0 for symbol rates > 4Ms/s */ + if (params->u.qpsk.symbol_rate >= 4000000) + reg1[1] |= 0x0c; + else + reg1[1] |= 0x04; + + reg2[1] |= 0x0c; + + R = 64; + A = 64; + P = 64; //32 + + M = (freq * R) / 4; /* in Mhz */ + N = (M - A * 1000) / (P * 1000); + + reg1[1] |= (N >> 9) & 0x03; + reg1[2] = (N >> 1) & 0xff; + reg1[3] = (N << 7) & 0x80; + + reg2[1] |= (R >> 8) & 0x03; + reg2[2] = R & 0xFF; /* R */ + + reg1[3] |= A & 0x7f; /* A */ + + if (P == 64) + reg1[1] |= 0x40; /* Prescaler 64/65 */ + + reg0[1] |= 0x03; + + /* already enabled - do not reenable i2c repeater or TX fails */ + msg.buf = reg0; + msg.len = sizeof(reg0); + if (i2c_transfer(i2c, &msg, 1) != 1) return -EIO; + + stv0299_enable_plli2c(fe); + msg.buf = reg1; + msg.len = sizeof(reg1); + if (i2c_transfer(i2c, &msg, 1) != 1) + return -EIO; + + stv0299_enable_plli2c(fe); + msg.buf = reg2; + msg.len = sizeof(reg2); + if (i2c_transfer(i2c, &msg, 1) != 1) + return -EIO; + return 0; } @@ -501,7 +655,7 @@ static u8 typhoon_cinergy1200s_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -533,7 +687,6 @@ static struct stv0299_config typhoon_config = { .inittab = typhoon_cinergy1200s_inittab, .mclk = 88000000UL, .invert = 0, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP0, @@ -548,7 +701,6 @@ static struct stv0299_config cinergy_1200s_config = { .inittab = typhoon_cinergy1200s_inittab, .mclk = 88000000UL, .invert = 0, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_0, .volt13_op0_op1 = STV0299_VOLT13_OP0, @@ -557,6 +709,18 @@ static struct stv0299_config cinergy_1200s_config = { .pll_set = philips_su1278_ty_ci_pll_set, }; +static struct stv0299_config cinergy_1200s_1894_0010_config = { + .demod_address = 0x68, + .inittab = typhoon_cinergy1200s_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, + .pll_set = philips_su1278sh2_tua6100_pll_set, +}; static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { @@ -570,9 +734,9 @@ static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_p buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; - buf[2] = 0x8e; - buf[3] = (params->frequency < 174500000 ? 0xa1 : - params->frequency < 454000000 ? 0x92 : 0x34); + buf[2] = 0x86; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) return -EIO; @@ -695,13 +859,126 @@ static struct tda1004x_config philips_tu1216_config = { .demod_address = 0x8, .invert = 1, .invert_oclk = 1, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, .pll_init = philips_tu1216_pll_init, .pll_set = philips_tu1216_pll_set, + .pll_sleep = NULL, .request_firmware = philips_tu1216_request_firmware, }; +static u8 philips_sd1878_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, + 0x05, 0x35, + 0x06, 0x40, + 0x07, 0x00, + 0x08, 0x43, + 0x09, 0x02, + 0x0C, 0x51, + 0x0D, 0x82, + 0x0E, 0x23, + 0x10, 0x3f, + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, + 0x16, 0x19, + 0x17, 0x8c, + 0x18, 0x59, + 0x19, 0xf8, + 0x1a, 0xfe, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x09, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x93, + 0xff, 0xff +}; + +static int philips_sd1878_tda8261_pll_set(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dvb_frontend_parameters *params) +{ + u8 buf[4]; + int rc; + struct i2c_msg tuner_msg = {.addr=0x60,.flags=0,.buf=buf,.len=sizeof(buf)}; + + if((params->frequency < 950000) || (params->frequency > 2150000)) + return -EINVAL; + + rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf, + params->frequency, 0); + if(rc < 0) return rc; + + if(i2c_transfer(i2c, &tuner_msg, 1) != 1) + return -EIO; + + return 0; +} + +static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + u8 m1; + + aclk = 0xb5; + if (srate < 2000000) + bclk = 0x86; + else if (srate < 5000000) + bclk = 0x89; + else if (srate < 15000000) + bclk = 0x8f; + else if (srate < 45000000) + bclk = 0x95; + + m1 = 0x14; + if (srate < 4000000) + m1 = 0x10; + + stv0299_writereg(fe, 0x0e, 0x23); + stv0299_writereg(fe, 0x0f, 0x94); + stv0299_writereg(fe, 0x10, 0x39); + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x15, 0xc9); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, (ratio) & 0xf0); + stv0299_writereg(fe, 0x0f, 0x80 | m1); + return 0; +} +static struct stv0299_config philips_sd1878_config = { + .demod_address = 0x68, + .inittab = philips_sd1878_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = philips_sd1878_ci_set_symbol_rate, + .pll_set = philips_sd1878_tda8261_pll_set, +}; static u8 read_pwm(struct budget_av *budget_av) { @@ -722,7 +999,11 @@ static u8 read_pwm(struct budget_av *budget_av) #define SUBID_DVBS_KNC1_PLUS 0x0011 #define SUBID_DVBS_TYPHOON 0x4f56 #define SUBID_DVBS_CINERGY1200 0x1154 +#define SUBID_DVBS_CYNERGY1200N 0x1155 +#define SUBID_DVBS_TV_STAR 0x0014 +#define SUBID_DVBS_TV_STAR_CI 0x0016 +#define SUBID_DVBS_EASYWATCH 0x001e #define SUBID_DVBC_KNC1 0x0020 #define SUBID_DVBC_KNC1_PLUS 0x0021 #define SUBID_DVBC_CINERGY1200 0x1156 @@ -741,6 +1022,7 @@ static void frontend_init(struct budget_av *budget_av) case SUBID_DVBC_KNC1_PLUS: case SUBID_DVBT_KNC1_PLUS: // Enable / PowerON Frontend + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); break; } @@ -748,6 +1030,23 @@ static void frontend_init(struct budget_av *budget_av) switch (saa->pci->subsystem_device) { case SUBID_DVBS_KNC1: + if (saa->pci->subsystem_vendor == 0x1894) { + fe = stv0299_attach(&cinergy_1200s_1894_0010_config, + &budget_av->budget.i2c_adap); + } else { + fe = stv0299_attach(&typhoon_config, + &budget_av->budget.i2c_adap); + } + break; + + case SUBID_DVBS_TV_STAR: + case SUBID_DVBS_TV_STAR_CI: + case SUBID_DVBS_CYNERGY1200N: + case SUBID_DVBS_EASYWATCH: + fe = stv0299_attach(&philips_sd1878_config, + &budget_av->budget.i2c_adap); + break; + case SUBID_DVBS_KNC1_PLUS: case SUBID_DVBS_TYPHOON: fe = stv0299_attach(&typhoon_config, @@ -853,11 +1152,9 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio dprintk(2, "dev: %p\n", dev); - if (!(budget_av = kmalloc(sizeof(struct budget_av), GFP_KERNEL))) + if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL))) return -ENOMEM; - memset(budget_av, 0, sizeof(struct budget_av)); - budget_av->has_saa7113 = 0; budget_av->budget.ci_present = 0; @@ -893,8 +1190,6 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio SAA7146_HPS_SYNC_PORT_A); saa7113_setinput(budget_av, 0); - } else { - ciintf_init(budget_av); } /* fixme: find some sane values here... */ @@ -914,6 +1209,10 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio budget_av->budget.dvb_adapter.priv = budget_av; frontend_init(budget_av); + if (!budget_av->has_saa7113) { + ciintf_init(budget_av); + } + return 0; } @@ -992,22 +1291,30 @@ static struct saa7146_extension budget_extension; MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR); +MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR); MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); +MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C); MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T); static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56), MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), + MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010), MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014), + MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016), + MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e), MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031), MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154), + MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155), MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156), MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157), { @@ -1018,7 +1325,9 @@ static struct pci_device_id pci_tbl[] = { MODULE_DEVICE_TABLE(pci, pci_tbl); static struct saa7146_extension budget_extension = { - .name = "budget dvb /w video in\0", + .name = "budget_av", + .flags = SAA7146_I2C_SHORT_DELAY, + .pci_tbl = pci_tbl, .module = THIS_MODULE,