X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmedia%2Fdvb%2Fttpci%2Fbudget.c;h=031105c1d48eead247f1efc782de35269d09dbd4;hb=6a77f38946aaee1cd85eeec6cf4229b204c15071;hp=fbf1d5a6df722151a5715a6e1f8cc3eec9bf4127;hpb=87fc8d1bb10cd459024a742c6a10961fefcef18f;p=linux-2.6.git

diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index fbf1d5a6d..031105c1d 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -35,12 +35,16 @@
  */
 
 #include "budget.h"
-#include "dvb_functions.h"
+#include "stv0299.h"
+#include "ves1x93.h"
+#include "ves1820.h"
+#include "l64781.h"
+#include "tda8083.h"
 
 static void Set22K (struct budget *budget, int state)
 {
 	struct saa7146_dev *dev=budget->dev;
-	DEB_EE(("budget: %p\n",budget));
+	dprintk(2, "budget: %p\n", budget);
 	saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
 }
 
@@ -52,7 +56,7 @@ static void Set22K (struct budget *budget, int state)
 static void DiseqcSendBit (struct budget *budget, int data)
 {
 	struct saa7146_dev *dev=budget->dev;
-	DEB_EE(("budget: %p\n",budget));
+	dprintk(2, "budget: %p\n", budget);
 
 	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
 	udelay(data ? 500 : 1000);
@@ -65,7 +69,7 @@ static void DiseqcSendByte (struct budget *budget, int data)
 {
 	int i, par=1, d;
 
-	DEB_EE(("budget: %p\n",budget));
+	dprintk(2, "budget: %p\n", budget);
 
 	for (i=7; i>=0; i--) {
 		d = (data>>i)&1;
@@ -82,7 +86,7 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long
 	struct saa7146_dev *dev=budget->dev;
 	int i;
 
-	DEB_EE(("budget: %p\n",budget));
+	dprintk(2, "budget: %p\n", budget);
 
 	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
 	mdelay(16);
@@ -100,95 +104,374 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long
 			udelay(12500);
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
 		}
-		dvb_delay(20);
+		msleep(20);
 	}
 
 	return 0;
 }
 
+/*
+ *   Routines for the Fujitsu Siemens Activy budget card
+ *   22 kHz tone and DiSEqC are handled by the frontend.
+ *   Voltage must be set here.
+ */
+static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
+{
+	struct saa7146_dev *dev=budget->dev;
+
+       dprintk(2, "budget: %p\n", budget);
+
+	switch (voltage) {
+		case SEC_VOLTAGE_13:
+			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
+			break;
+		case SEC_VOLTAGE_18:
+			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	return 0;
+}
 
-int budget_diseqc_ioctl (struct dvb_frontend *fe, unsigned int cmd, void *arg)
+static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
-       struct budget *budget = fe->before_after_data;
+	struct budget* budget = (struct budget*) fe->dvb->priv;
 
-       DEB_EE(("budget: %p\n",budget));
+	return SetVoltage_Activy (budget, voltage);
+}
 
-       switch (cmd) {
-       case FE_SET_TONE:
-               switch ((fe_sec_tone_mode_t) arg) {
+static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	switch (tone) {
                case SEC_TONE_ON:
                        Set22K (budget, 1);
                        break;
                case SEC_TONE_OFF:
                        Set22K (budget, 0);
                        break;
+
                default:
                        return -EINVAL;
-               };
-               break;
+	}
 
-       case FE_DISEQC_SEND_MASTER_CMD:
+	return 0;
+}
+
+static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
        {
-               struct dvb_diseqc_master_cmd *cmd = arg;
+	struct budget* budget = (struct budget*) fe->dvb->priv;
 
                SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
-               break;
+
+	return 0;
        }
 
-       case FE_DISEQC_SEND_BURST:
-               SendDiSEqCMsg (budget, 0, NULL, (unsigned long)arg);
-               break;
+static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
 
-       default:
-               return -EOPNOTSUPP;
-       };
+	SendDiSEqCMsg (budget, 0, NULL, minicmd);
 
        return 0;
 }
 
+static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u8 pwr = 0;
+	u8 buf[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	u32 div = (params->frequency + 479500) / 125;
+
+	if (params->frequency > 2000000) pwr = 3;
+	else if (params->frequency > 1800000) pwr = 2;
+	else if (params->frequency > 1600000) pwr = 1;
+	else if (params->frequency > 1200000) pwr = 0;
+	else if (params->frequency >= 1100000) pwr = 1;
+	else pwr = 2;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = ((div & 0x18000) >> 10) | 0x95;
+	buf[3] = (pwr << 6) | 0x30;
+
+        // NOTE: since we're using a prescaler of 2, we set the
+	// divisor frequency to 62.5kHz and divide by 125 above
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
 
-/*
- *   Routines for the Fujitsu Siemens Activy budget card
- *   22 kHz tone and DiSEqC are handled by the frontend.
- *   Voltage must be set here.
- */
-static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
+static struct ves1x93_config alps_bsrv2_config =
 {
-	struct saa7146_dev *dev=budget->dev;
+	.demod_address = 0x08,
+	.xin = 90100000UL,
+	.invert_pwm = 0,
+	.pll_set = alps_bsrv2_pll_set,
+};
 
-	DEB_EE(("budget: %p\n",budget));
+static u8 alps_bsru6_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x00,
+	0x03, 0x00,
+        0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,   /* DAC not used, set to high impendance mode */
+	0x07, 0x00,   /* DAC LSB */
+	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,   /* FIFO */
+	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,   // AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb5,   // Lock detect: -64  Carrier freq detect:on
+	0x15, 0xc9,   // lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,  // 1/2 threshold
+	0x2a, 0x14,  // 2/3 threshold
+	0x2b, 0x0f,  // 3/4 threshold
+	0x2c, 0x09,  // 5/6 threshold
+	0x2d, 0x05,  // 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,  // test all FECs
+	0x32, 0x19,  // viterbi and synchro search
+	0x33, 0xfc,  // rs control
+	0x34, 0x93,  // error control
+	0x0f, 0x52,
+	0xff, 0xff
+};
 
-	switch (voltage) {
-		case SEC_VOLTAGE_13:
-			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
-			break;
-		case SEC_VOLTAGE_18:
-			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
-			break;
-		default:
-			return -EINVAL;
+static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+	stv0299_writereg (fe, 0x13, aclk);
+	stv0299_writereg (fe, 0x14, bclk);
+	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
+
+	return 0;
 	}
 
+static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u8 data[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
+
+	div = (params->frequency + (125 - 1)) / 125; // round correctly
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	data[3] = 0xC4;
+
+	if (params->frequency > 1530000) data[3] = 0xc0;
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
 	return 0;
 }
 
+static struct stv0299_config alps_bsru6_config = {
+
+	.demod_address = 0x68,
+	.inittab = alps_bsru6_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.enhanced_tuning = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0229_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsru6_set_symbol_rate,
+	.pll_set = alps_bsru6_pll_set,
+};
 
-static int budget_ioctl_activy (struct dvb_frontend *fe, unsigned int cmd, void *arg)
+static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
 {
-	struct budget *budget = fe->before_after_data;
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u32 div;
+	u8 data[4];
+	struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
 
-	DEB_EE(("budget: %p\n",budget));
+	div = (params->frequency + 35937500 + 31250) / 62500;
 
-	switch (cmd) {
-		case FE_SET_VOLTAGE:
-			return SetVoltage_Activy (budget, (fe_sec_voltage_t) arg);
-		default:
-			return -EOPNOTSUPP;
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x85 | ((div >> 10) & 0x60);
+	data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81);
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct ves1820_config alps_tdbe2_config = {
+	.demod_address = 0x09,
+	.xin = 57840000UL,
+	.invert = 1,
+	.selagc = VES1820_SELAGC_SIGNAMPERR,
+	.pll_set = alps_tdbe2_pll_set,
+};
+
+static int grundig_29504_401_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u32 div;
+	u8 cfg, cpump, band_select;
+	u8 data[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	div = (36125000 + params->frequency) / 166666;
+
+	cfg = 0x88;
+
+	if (params->frequency < 175000000) cpump = 2;
+	else if (params->frequency < 390000000) cpump = 1;
+	else if (params->frequency < 470000000) cpump = 2;
+	else if (params->frequency < 750000000) cpump = 1;
+	else cpump = 3;
+
+	if (params->frequency < 175000000) band_select = 0x0e;
+	else if (params->frequency < 470000000) band_select = 0x05;
+	else band_select = 0x03;
+
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = ((div >> 10) & 0x60) | cfg;
+	data[3] = (cpump << 6) | band_select;
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
 	}
 
+static struct l64781_config grundig_29504_401_config = {
+	.demod_address = 0x55,
+	.pll_set = grundig_29504_401_pll_set,
+};
+
+static int grundig_29504_451_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u32 div;
+	u8 data[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	div = params->frequency / 125;
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x8e;
+	data[3] = 0x00;
+
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
 	return 0;
 }
 
+static struct tda8083_config grundig_29504_451_config = {
+	.demod_address = 0x68,
+	.pll_set = grundig_29504_451_pll_set,
+};
+
+static u8 read_pwm(struct budget* budget)
+{
+	u8 b = 0xff;
+	u8 pwm;
+	struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
+				 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
+
+        if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+		pwm = 0x48;
+
+	return pwm;
+}
+
+static void frontend_init(struct budget *budget)
+{
+	switch(budget->dev->pci->subsystem_device) {
+	case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
+	case 0x1013:
+		// try the ALPS BSRV2 first of all
+		budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+		        budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+			budget->dvb_frontend->ops->set_tone = budget_set_tone;
+			break;
+		}
+
+		// try the ALPS BSRU6 now
+		budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+			budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+			budget->dvb_frontend->ops->set_tone = budget_set_tone;
+			break;
+		}
+		break;
+
+   	case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
+
+		budget->dvb_frontend = ves1820_attach(&alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
+		if (budget->dvb_frontend) break;
+		break;
+
+   	case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
+
+		budget->dvb_frontend = l64781_attach(&grundig_29504_401_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) break;
+		break;
+
+	case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI (tda8083/Grundig 29504-451(tsa5522))
+
+		// grundig 29504-451
+                budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
+			break;
+		}
+		break;
+	}
+
+	if (budget->dvb_frontend == NULL) {
+		printk("budget: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+		       budget->dev->pci->vendor,
+		       budget->dev->pci->device,
+		       budget->dev->pci->subsystem_vendor,
+		       budget->dev->pci->subsystem_device);
+	} else {
+		if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) {
+			printk("budget: Frontend registration failed!\n");
+			if (budget->dvb_frontend->ops->release)
+				budget->dvb_frontend->ops->release(budget->dvb_frontend);
+			budget->dvb_frontend = NULL;
+		}
+	}
+}
 
 static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
 {
@@ -200,22 +483,18 @@ static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_
 		return -ENOMEM;
 	}
 
-	DEB_EE(("dev:%p, info:%p, budget:%p\n",dev,info,budget));
+	dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
 
-	if ((err = ttpci_budget_init (budget, dev, info))) {
+	dev->ext_priv = budget;
+
+	if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
 		printk("==> failed\n");
 		kfree (budget);
 		return err;
 	}
 
-	if (budget->card->type == BUDGET_FS_ACTIVY)
-		dvb_add_frontend_ioctls (budget->dvb_adapter,
-				 budget_ioctl_activy, NULL, budget);
-	else
-	dvb_add_frontend_ioctls (budget->dvb_adapter,
-				 budget_diseqc_ioctl, NULL, budget);
-
-	dev->ext_priv = budget;
+	budget->dvb_adapter->priv = budget;
+	frontend_init(budget);
 
 	return 0;
 }
@@ -226,12 +505,7 @@ static int budget_detach (struct saa7146_dev* dev)
 	struct budget *budget = (struct budget*) dev->ext_priv;
 	int err;
 
-	if (budget->card->type == BUDGET_FS_ACTIVY)
-		dvb_remove_frontend_ioctls (budget->dvb_adapter,
-				    budget_ioctl_activy, NULL);
-	else
-	dvb_remove_frontend_ioctls (budget->dvb_adapter,
-				    budget_diseqc_ioctl, NULL);
+	if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
 
 	err = ttpci_budget_deinit (budget);
 
@@ -250,12 +524,8 @@ MAKE_BUDGET_INFO(ttbc,	"TT-Budget/WinTV-NOVA-C  PCI",	BUDGET_TT);
 MAKE_BUDGET_INFO(ttbt,	"TT-Budget/WinTV-NOVA-T  PCI",	BUDGET_TT);
 MAKE_BUDGET_INFO(satel,	"SATELCO Multimedia PCI",	BUDGET_TT_HW_DISEQC);
 MAKE_BUDGET_INFO(fsacs, "Fujitsu Siemens Activy Budget-S PCI", BUDGET_FS_ACTIVY);
-/* Uncomment for Budget Patch */
-/*MAKE_BUDGET_INFO(fs_1_3,"Siemens/Technotrend/Hauppauge PCI rev1.3+Budget_Patch", BUDGET_PATCH);*/
 
 static struct pci_device_id pci_tbl[] = {
-	/* Uncomment for Budget Patch */
-	/*MAKE_EXTENSION_PCI(fs_1_3,0x13c2, 0x0000),*/
 	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1003),
 	MAKE_EXTENSION_PCI(ttbc,  0x13c2, 0x1004),
 	MAKE_EXTENSION_PCI(ttbt,  0x13c2, 0x1005),
@@ -290,7 +560,6 @@ static int __init budget_init(void)
 
 static void __exit budget_exit(void)
 {
-	DEB_EE((".\n"));
 	saa7146_unregister_extension(&budget_extension); 
 }