X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmedia%2Fvideo%2Fzoran_device.c;h=b0752767ee4f5195df9144a42712837d4eedfd47;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=4e15afdec4c9d4b60eb8ddc5616899dab2554a91;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c
index 4e15afdec..b0752767e 100644
--- a/drivers/media/video/zoran_device.c
+++ b/drivers/media/video/zoran_device.c
@@ -4,7 +4,7 @@
  * Media Labs LML33/LML33R10.
  *
  * This part handles device access (PCI/I2C/codec/...)
- * 
+ *
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
  *
  * Currently maintained by:
@@ -27,7 +27,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -430,7 +429,7 @@ zr36057_set_vfe (struct zoran              *zr,
 	reg |= (HorDcm << ZR36057_VFESPFR_HorDcm);
 	reg |= (VerDcm << ZR36057_VFESPFR_VerDcm);
 	reg |= (DispMode << ZR36057_VFESPFR_DispMode);
-	if (format->palette != VIDEO_PALETTE_YUV422)
+	if (format->palette != VIDEO_PALETTE_YUV422 && format->palette != VIDEO_PALETTE_YUYV)
 		reg |= ZR36057_VFESPFR_LittleEndian;
 	/* RJ: I don't know, why the following has to be the opposite
 	 * of the corresponding ZR36060 setting, but only this way
@@ -442,6 +441,7 @@ zr36057_set_vfe (struct zoran              *zr,
 	reg |= ZR36057_VFESPFR_TopField;
 	switch (format->palette) {
 
+	case VIDEO_PALETTE_YUYV:
 	case VIDEO_PALETTE_YUV422:
 		reg |= ZR36057_VFESPFR_YUV422;
 		break;
@@ -492,7 +492,7 @@ zr36057_set_vfe (struct zoran              *zr,
 	/* (Ronald) don't write this if overlay_mask = NULL */
 	if (zr->overlay_mask) {
 		/* Write overlay clipping mask data, but don't enable overlay clipping */
-		/* RJ: since this makes only sense on the screen, we use 
+		/* RJ: since this makes only sense on the screen, we use
 		 * zr->overlay_settings.width instead of video_width */
 
 		mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
@@ -536,7 +536,7 @@ zr36057_overlay (struct zoran *zr,
 		 * All error messages are internal driver checking only! */
 
 		/* video display top and bottom registers */
-		reg = (u32) zr->buffer.base +
+		reg = (long) zr->buffer.base +
 		    zr->overlay_settings.x *
 		    ((zr->overlay_settings.format->depth + 7) / 8) +
 		    zr->overlay_settings.y *
@@ -819,12 +819,12 @@ zr36057_set_jpg (struct zoran          *zr,
 	if (zr->card.vfe_pol.hsync_pol)
 		btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
 	else
-		btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);		
+		btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
 	reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
 	      (tvn->Wt << ZR36057_HSP_LineTot);
 	btwrite(reg, ZR36057_HSP);
 	reg = ((zr->jpg_settings.img_x +
-	        tvn->HStart + 4) << ZR36057_FHAP_NAX) |
+		tvn->HStart + 4) << ZR36057_FHAP_NAX) |
 	      (zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
 	btwrite(reg, ZR36057_FHAP);
 
@@ -1272,15 +1272,15 @@ error_handler (struct zoran *zr,
 	if (zr->JPEG_error != 1) {
 		/*
 		 * First entry: error just happened during normal operation
-		 * 
+		 *
 		 * In BUZ_MODE_MOTION_COMPRESS:
-		 * 
+		 *
 		 * Possible glitch in TV signal. In this case we should
 		 * stop the codec and wait for good quality signal before
 		 * restarting it to avoid further problems
-		 * 
+		 *
 		 * In BUZ_MODE_MOTION_DECOMPRESS:
-		 * 
+		 *
 		 * Bad JPEG frame: we have to mark it as processed (codec crashed
 		 * and was not able to do it itself), and to remove it from queue.
 		 */
@@ -1409,15 +1409,14 @@ error_handler (struct zoran *zr,
 
 irqreturn_t
 zoran_irq (int             irq,
-	   void           *dev_id,
-	   struct pt_regs *regs)
+	   void           *dev_id)
 {
 	u32 stat, astat;
 	int count;
 	struct zoran *zr;
 	unsigned long flags;
 
-	zr = (struct zoran *) dev_id;
+	zr = dev_id;
 	count = 0;
 
 	if (zr->testing) {