X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmessage%2Ffusion%2FKconfig;h=e67cf15e9c3961af697067c4007e78ffd359da4b;hb=987b0145d94eecf292d8b301228356f44611ab7c;hp=c78ecc4b2c8214022cd85608f5b03497f1f4df51;hpb=daddc0d38b3571bed170afa273a49a0eba090c1e;p=linux-2.6.git

diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index c78ecc4b2..e67cf15e9 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -2,67 +2,72 @@
 menu "Fusion MPT device support"
 
 config FUSION
-	tristate "Fusion MPT (base + ScsiHost) drivers"
-	depends on PCI
+	bool
+	default n
+
+config FUSION_SPI
+	tristate "Fusion MPT ScsiHost drivers for SPI"
+	depends on PCI && SCSI
+	select FUSION
+	---help---
+	  SCSI HOST support for a parallel SCSI host adapters.
+
+	  List of supported controllers:
+
+	  LSI53C1020
+	  LSI53C1020A
+	  LSI53C1030
+	  LSI53C1035
+
+config FUSION_FC
+	tristate "Fusion MPT ScsiHost drivers for FC"
+	depends on PCI && SCSI
+	select FUSION
+	select SCSI_FC_ATTRS
+	---help---
+	  SCSI HOST support for a Fiber Channel host adapters.
+
+	  List of supported controllers:
+
+	  LSIFC909
+	  LSIFC919
+	  LSIFC919X
+	  LSIFC929
+	  LSIFC929X
+	  LSIFC929XL
+
+config FUSION_SAS
+	tristate "Fusion MPT ScsiHost drivers for SAS"
+	depends on PCI && SCSI
+ 	select FUSION
+	select SCSI_SAS_ATTRS
 	---help---
-	  LSI Logic Fusion(TM) Message Passing Technology (MPT) device support
-	  provides high performance SCSI host initiator, and LAN [1] interface
-	  services to a host system.  The Fusion architecture is capable of
-	  duplexing these protocols on high-speed Fibre Channel
-	  (up to 2 GHz x 2 ports = 4 GHz) and parallel SCSI (up to Ultra-320)
-	  physical medium.
+	  SCSI HOST support for a SAS host adapters.
 
-	  [1] LAN is not supported on parallel SCSI medium.
+	  List of supported controllers:
+
+	  LSISAS1064
+	  LSISAS1066
+	  LSISAS1068
+	  LSISAS1064E
+	  LSISAS1066E
+	  LSISAS1068E
 
 config FUSION_MAX_SGE
-	int "Maximum number of scatter gather entries"
+	int "Maximum number of scatter gather entries (16 - 128)"
 	depends on FUSION
-	default "40"
+	default "128"
+	range 16 128
 	help
 	  This option allows you to specify the maximum number of scatter-
-	  gather entries per I/O. The driver defaults to 40, a reasonable number
-	  for most systems. However, the user may increase this up to 128.
-	  Increasing this parameter will require significantly more memory 
-	  on a per controller instance. Increasing the parameter is not
-	  necessary (or recommended) unless the user will be running 
-	  large I/O's via the raw interface.
-
-config FUSION_ISENSE
-	tristate "Enhanced SCSI error reporting"
-	depends on MODULES && FUSION && m
-	---help---
-	  The isense module (roughly stands for Interpret SENSE data) is
-	  completely optional.  It simply provides extra English readable
-	  strings in SCSI Error Report(s) that might be generated from the
-	  Fusion MPT SCSI Host driver, for example when a target device
-	  returns a SCSI check condition on a I/O.  Without this module
-	  loaded you might see:
-
-	  SCSI Error Report =-=-= (ioc0,scsi5:0)
-	  SCSI_Status=02h (CHECK_CONDITION)
-	  Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00
-	  SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
-	  SenseKey=2h (NOT READY); FRU=02h
-	  ASC/ASCQ=29h/00h
-
-	  Where otherwise, if this module had been loaded, you would see:
-
-	  SCSI Error Report =-=-= (ioc0,scsi5:0)
-	  SCSI_Status=02h (CHECK_CONDITION)
-	  Original_CDB[]: 2A 00 00 00 00 41 00 00 02 00 - "WRITE(10)"
-	  SenseData[12h]: 70 00 02 00 00 00 00 0A 00 00 00 00 04 02 02 00 00 00
-	  SenseKey=2h (NOT READY); FRU=02h
-	  ASC/ASCQ=29h/00h "LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED"
-
-	  Say M for "Enhanced SCSI error reporting" to compile this optional module,
-	  creating a driver named: isense.
-
-	  NOTE: Support for building this feature into the kernel is not
-	  available, due to kernel size considerations.
+	  gather entries per I/O. The driver default is 128, which matches
+	  SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16.
+	  Decreasing this parameter will reduce memory requirements
+	  on a per controller instance.
 
 config FUSION_CTL
 	tristate "Fusion MPT misc device (ioctl) driver"
-	depends on MODULES && FUSION && m
+	depends on FUSION_SPI || FUSION_FC
 	---help---
 	  The Fusion MPT misc device driver provides specialized control
 	  of MPT adapters via system ioctl calls.  Use of ioctl calls to
@@ -81,7 +86,7 @@ config FUSION_CTL
 
 config FUSION_LAN
 	tristate "Fusion MPT LAN driver"
-	depends on FUSION && NET_FC
+	depends on FUSION_FC && NET_FC
 	---help---
 	  This module supports LAN IP traffic over Fibre Channel port(s)
 	  on Fusion MPT compatible hardware (LSIFC9xx chips).