X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmtd%2Fmaps%2Fl440gx.c;h=851bf957605205c66ed3a7fe0d0777e83b44e4f6;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=b08668212ab7401a0640e15f9fab420431d93499;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index b08668212..851bf9576 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,5 +1,5 @@
 /*
- * $Id: l440gx.c,v 1.17 2004/11/28 09:40:39 dwmw2 Exp $
+ * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
  *
  * BIOS Flash chip on Intel 440GX board.
  *
@@ -49,7 +49,7 @@ static struct map_info l440gx_map = {
 	.bankwidth = BUSWIDTH,
 	.phys = WINDOW_ADDR,
 #if 0
-	/* FIXME verify that this is the 
+	/* FIXME verify that this is the
 	 * appripriate code for vpp enable/disable
 	 */
 	.set_vpp = l440gx_set_vpp
@@ -62,10 +62,10 @@ static int __init init_l440gx(void)
 	struct resource *pm_iobase;
 	__u16 word;
 
-	dev = pci_find_device(PCI_VENDOR_ID_INTEL, 
+	dev = pci_find_device(PCI_VENDOR_ID_INTEL,
 		PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
 
-	pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL, 
+	pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL,
 		PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
 
 	if (!dev || !pm_dev) {
@@ -82,10 +82,10 @@ static int __init init_l440gx(void)
 	simple_map_init(&l440gx_map);
 	printk(KERN_NOTICE "window_addr = 0x%08lx\n", (unsigned long)l440gx_map.virt);
 
-	/* Setup the pm iobase resource 
+	/* Setup the pm iobase resource
 	 * This code should move into some kind of generic bridge
 	 * driver but for the moment I'm content with getting the
-	 * allocation correct. 
+	 * allocation correct.
 	 */
 	pm_iobase = &pm_dev->resource[PIIXE_IOBASE_RESOURCE];
 	if (!(pm_iobase->flags & IORESOURCE_IO)) {
@@ -110,7 +110,7 @@ static int __init init_l440gx(void)
 	/* Set the iobase */
 	iobase = pm_iobase->start;
 	pci_write_config_dword(pm_dev, 0x40, iobase | 1);
-	
+
 
 	/* Set XBCS# */
 	pci_read_config_word(dev, 0x4e, &word);
@@ -122,7 +122,7 @@ static int __init init_l440gx(void)
 
 	/* Enable the gate on the WE line */
 	outb(inb(TRIBUF_PORT) & ~1, TRIBUF_PORT);
-	
+
        	printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
 
 	mymtd = do_map_probe("jedec_probe", &l440gx_map);
@@ -145,7 +145,7 @@ static void __exit cleanup_l440gx(void)
 {
 	del_mtd_device(mymtd);
 	map_destroy(mymtd);
-	
+
 	iounmap(l440gx_map.virt);
 }