X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fmtd%2Fnand%2FKconfig;fp=drivers%2Fmtd%2Fnand%2FKconfig;h=cfe288a6e85358b2a639e779aef1dc0f84928c79;hb=64ba3f394c830ec48a1c31b53dcae312c56f1604;hp=c99302ed3823250a7d31c0de37188a914fd93b15;hpb=be1e6109ac94a859551f8e1774eb9a8469fe055c;p=linux-2.6.git

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c99302ed3..cfe288a6e 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -11,7 +11,7 @@ config MTD_NAND
 	help
 	  This enables support for accessing all type of NAND flash
 	  devices. For further information see
-	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
+	  <http://www.linux-mtd.infradead.org/tech/nand.html>.
 
 config MTD_NAND_VERIFY_WRITE
 	bool "Verify NAND page writes"
@@ -23,14 +23,6 @@ config MTD_NAND_VERIFY_WRITE
 	  device thinks the write was successful, a bit could have been
 	  flipped accidentaly due to device wear or something else.
 
-config MTD_NAND_ECC_SMC
-	bool "NAND ECC Smart Media byte order"
-	depends on MTD_NAND
-	default n
-	help
-	  Software ECC according to the Smart Media Specification.
-	  The original Linux implementation had byte 0 and 1 swapped.
-
 config MTD_NAND_AUTCPU12
 	tristate "SmartMediaCard on autronix autcpu12 board"
 	depends on MTD_NAND && ARCH_AUTCPU12
@@ -57,24 +49,12 @@ config MTD_NAND_SPIA
 	help
 	  If you had to ask, you don't have one. Say 'N'.
 
-config MTD_NAND_AMS_DELTA
-	tristate "NAND Flash device on Amstrad E3"
-	depends on MACH_AMS_DELTA && MTD_NAND
-	help
-	  Support for NAND flash on Amstrad E3 (Delta).
-
 config MTD_NAND_TOTO
 	tristate "NAND Flash device on TOTO board"
-	depends on ARCH_OMAP && MTD_NAND && BROKEN
+	depends on ARCH_OMAP && MTD_NAND
 	help
 	  Support for NAND flash on Texas Instruments Toto platform.
 
-config MTD_NAND_TS7250
-	tristate "NAND Flash device on TS-7250 board"
-	depends on MACH_TS72XX && MTD_NAND
-	help
-	  Support for NAND flash on Technologic Systems TS-7250 platform.
-
 config MTD_NAND_IDS
 	tristate
 
@@ -96,7 +76,7 @@ config MTD_NAND_RTC_FROM4
 
 config MTD_NAND_PPCHAMELEONEVB
 	tristate "NAND Flash device on PPChameleonEVB board"
-	depends on PPCHAMELEONEVB && MTD_NAND && BROKEN
+	depends on PPCHAMELEONEVB && MTD_NAND
 	help
 	  This enables the NAND flash driver on the PPChameleon EVB Board.
 
@@ -107,7 +87,7 @@ config MTD_NAND_S3C2410
 	  This enables the NAND flash controller on the S3C2410 and S3C2440
 	  SoCs
 
-	  No board specific support is done by this driver, each board
+	  No board specfic support is done by this driver, each board
 	  must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_S3C2410_DEBUG
@@ -129,22 +109,6 @@ config MTD_NAND_S3C2410_HWECC
 	  currently not be able to switch to software, as there is no
 	  implementation for ECC method used by the S3C2410
 
-config MTD_NAND_NDFC
-	tristate "NDFC NanD Flash Controller"
-	depends on MTD_NAND && 44x
-	help
-	 NDFC Nand Flash Controllers are integrated in EP44x SoCs
-
-config MTD_NAND_S3C2410_CLKSTOP
-	bool "S3C2410 NAND IDLE clock stop"
-	depends on MTD_NAND_S3C2410
-	default n
-	help
-	  Stop the clock to the NAND controller when there is no chip
-	  selected to save power. This will mean there is a small delay
-	  when the is NAND chip selected or released, but will save
-	  approximately 5mA of power when there is nothing happening.
-
 config MTD_NAND_DISKONCHIP
 	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
 	depends on MTD_NAND && EXPERIMENTAL
@@ -219,24 +183,11 @@ config MTD_NAND_SHARPSL
 	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
 	depends on MTD_NAND && ARCH_PXA
 
-config MTD_NAND_CS553X
-	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
-	depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH)
-	help
-	  The CS553x companion chips for the AMD Geode processor
-	  include NAND flash controllers with built-in hardware ECC
-	  capabilities; enabling this option will allow you to use
-	  these. The driver will check the MSRs to verify that the
-	  controller is enabled for NAND, and currently requires that
-	  the controller be in MMIO mode.
-
-	  If you say "m", the module will be called "cs553x_nand.ko".
-
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
 	depends on MTD_NAND && MTD_PARTITIONS
 	help
-	  The simulator may simulate various NAND flash chips for the
+	  The simulator may simulate verious NAND flash chips for the
 	  MTD nand layer.
 
 endmenu