X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2F3c505.c;h=702bfb2a5e99d047f82e6d2b80e46c48396108e2;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=111601ca4ca3da97d054cf3a70dfad08da476735;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index 111601ca4..702bfb2a5 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -315,11 +315,11 @@ static inline void check_3c505_dma(struct net_device *dev)
 		spin_lock_irqsave(&adapter->lock, flags);
 		adapter->dmaing = 0;
 		adapter->busy = 0;
-		
+
 		f=claim_dma_lock();
 		disable_dma(dev->dma);
 		release_dma_lock(f);
-		
+
 		if (adapter->rx_active)
 			adapter->rx_active--;
 		outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
@@ -649,7 +649,7 @@ static void receive_packet(struct net_device *dev, int len)
  *
  ******************************************************/
 
-static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
+static irqreturn_t elp_interrupt(int irq, void *dev_id)
 {
 	int len;
 	int dlen;
@@ -660,7 +660,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
 
 	dev = dev_id;
 	adapter = (elp_device *) dev->priv;
-	
+
 	spin_lock(&adapter->lock);
 
 	do {
@@ -712,7 +712,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
 		timeout = jiffies + 3*HZ/100;
 		while ((inb_status(dev->base_addr) & ACRF) != 0 && time_before(jiffies, timeout)) {
 			if (receive_pcb(dev, &adapter->irx_pcb)) {
-				switch (adapter->irx_pcb.command) 
+				switch (adapter->irx_pcb.command)
 				{
 				case 0:
 					break;
@@ -889,7 +889,7 @@ static int elp_open(struct net_device *dev)
 	adapter->send_pcb_semaphore = 0;
 	adapter->rx_backlog.in = 0;
 	adapter->rx_backlog.out = 0;
-	
+
 	spin_lock_init(&adapter->lock);
 
 	/*
@@ -1003,7 +1003,7 @@ static int send_packet(struct net_device *dev, struct sk_buff *skb)
 	}
 
 	adapter->stats.tx_bytes += nlen;
-	
+
 	/*
 	 * send the adapter a transmit packet command. Ignore segment and offset
 	 * and make sure the length is even
@@ -1044,7 +1044,7 @@ static int send_packet(struct net_device *dev, struct sk_buff *skb)
 	outb_control(adapter->hcr_val | DMAE | TCEN, dev);
 	enable_dma(dev->dma);
 	release_dma_lock(flags);
-	
+
 	if (elp_debug >= 3)
 		printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
 
@@ -1054,7 +1054,7 @@ static int send_packet(struct net_device *dev, struct sk_buff *skb)
 /*
  *	The upper layer thinks we timed out
  */
- 
+
 static void elp_timeout(struct net_device *dev)
 {
 	elp_device *adapter = dev->priv;
@@ -1080,7 +1080,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	unsigned long flags;
 	elp_device *adapter = dev->priv;
-	
+
 	spin_lock_irqsave(&adapter->lock, flags);
 	check_3c505_dma(dev);
 
@@ -1088,7 +1088,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
 
 	netif_stop_queue(dev);
-	
+
 	/*
 	 * send the packet at skb->data for skb->len
 	 */
@@ -1169,7 +1169,7 @@ static void netdev_set_msglevel(struct net_device *dev, u32 level)
 	debug = level;
 }
 
-static struct ethtool_ops netdev_ethtool_ops = {
+static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_drvinfo		= netdev_get_drvinfo,
 	.get_msglevel		= netdev_get_msglevel,
 	.set_msglevel		= netdev_set_msglevel,
@@ -1235,7 +1235,7 @@ static void elp_set_mc_list(struct net_device *dev)
 		printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
 
 	spin_lock_irqsave(&adapter->lock, flags);
-	
+
 	if (!(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
 		/* send a "load multicast list" command to the board, max 10 addrs/cmd */
 		/* if num_addrs==0 the list will be cleared */
@@ -1633,7 +1633,7 @@ MODULE_PARM_DESC(io, "EtherLink Plus I/O base address(es)");
 MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)");
 MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)");
 
-int init_module(void)
+int __init init_module(void)
 {
 	int this_dev, found = 0;
 
@@ -1670,7 +1670,7 @@ int init_module(void)
 	return 0;
 }
 
-void cleanup_module(void)
+void __exit cleanup_module(void)
 {
 	int this_dev;