X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fibm_emac%2Fibm_emac_core.h;h=dabb94afeb98a63a9ef0fd080b4dbf3b8a43e3a3;hb=refs%2Fheads%2Fvserver;hp=026a01cf78e52eda2af005b023e580bb99fb7cae;hpb=6a77f38946aaee1cd85eeec6cf4229b204c15071;p=linux-2.6.git diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h index 026a01cf7..dabb94afe 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.h +++ b/drivers/net/ibm_emac/ibm_emac_core.h @@ -1,144 +1,222 @@ /* - * ibm_emac_core.h + * drivers/net/ibm_emac/ibm_emac_core.h * - * Ethernet driver for the built in ethernet on the IBM 405 PowerPC - * processor. + * Driver for PowerPC 4xx on-chip ethernet controller. * - * Armin Kuster akuster@mvista.com - * Sept, 2001 + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Orignial driver - * Johnnie Peters - * jpeters@mvista.com - * - * Copyright 2000 MontaVista Softare Inc. + * Based on original work by + * Armin Kuster + * Johnnie Peters + * Copyright 2000, 2001 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ - -#ifndef _IBM_EMAC_CORE_H_ -#define _IBM_EMAC_CORE_H_ +#ifndef __IBM_EMAC_CORE_H_ +#define __IBM_EMAC_CORE_H_ #include +#include #include -#include /* For phys_addr_t */ #include "ibm_emac.h" #include "ibm_emac_phy.h" -#include "ibm_emac_rgmii.h" #include "ibm_emac_zmii.h" +#include "ibm_emac_rgmii.h" #include "ibm_emac_mal.h" #include "ibm_emac_tah.h" -#ifndef CONFIG_IBM_EMAC_TXB -#define NUM_TX_BUFF 64 -#define NUM_RX_BUFF 64 -#else -#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB -#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB -#endif +#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB +#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB -/* This does 16 byte alignment, exactly what we need. - * The packet length includes FCS, but we don't want to - * include that when passing upstream as it messes up - * bridging applications. - */ -#ifndef CONFIG_IBM_EMAC_SKBRES -#define SKB_RES 2 -#else -#define SKB_RES CONFIG_IBM_EMAC_SKBRES +/* Simple sanity check */ +#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 +#error Invalid number of buffer descriptors (greater than 256) #endif -/* Note about alignement. alloc_skb() returns a cache line - * aligned buffer. However, dev_alloc_skb() will add 16 more - * bytes and "reserve" them, so our buffer will actually end - * on a half cache line. What we do is to use directly - * alloc_skb, allocate 16 more bytes to match the total amount - * allocated by dev_alloc_skb(), but we don't reserve. +// XXX +#define EMAC_MIN_MTU 46 +#define EMAC_MAX_MTU 9000 + +/* Maximum L2 header length (VLAN tagged, no FCS) */ +#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) + +/* RX BD size for the given MTU */ +static inline int emac_rx_size(int mtu) +{ + if (mtu > ETH_DATA_LEN) + return MAL_MAX_RX_SIZE; + else + return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); +} + +#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) + +#define EMAC_RX_SKB_HEADROOM \ + EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM) + +/* Size of RX skb for the given MTU */ +static inline int emac_rx_skb_size(int mtu) +{ + int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); + return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; +} + +/* RX DMA sync size */ +static inline int emac_rx_sync_size(int mtu) +{ + return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); +} + +/* Driver statistcs is split into two parts to make it more cache friendly: + * - normal statistics (packet count, etc) + * - error statistics + * + * When statistics is requested by ethtool, these parts are concatenated, + * normal one goes first. + * + * Please, keep these structures in sync with emac_stats_keys. */ -#define MAX_NUM_BUF_DESC 255 -#define DESC_BUF_SIZE 4080 /* max 4096-16 */ -#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16) - -/* Transmitter timeout. */ -#define TX_TIMEOUT (2*HZ) - -/* MDIO latency delay */ -#define MDIO_DELAY 250 - -/* Power managment shift registers */ -#define IBM_CPM_EMMII 0 /* Shift value for MII */ -#define IBM_CPM_EMRX 1 /* Shift value for recv */ -#define IBM_CPM_EMTX 2 /* Shift value for MAC */ -#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX)) - -#define ENET_HEADER_SIZE 14 -#define ENET_FCS_SIZE 4 -#define EMAC_MIN_FRAME 64 -#define EMAC_MAX_FRAME 9018 -#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) -#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) - -#ifdef CONFIG_IBM_EMAC_ERRMSG -void emac_serr_dump_0(struct net_device *dev); -void emac_serr_dump_1(struct net_device *dev); -void emac_err_dump(struct net_device *dev, int em0isr); -void emac_phy_dump(struct net_device *); -void emac_desc_dump(struct net_device *); -void emac_mac_dump(struct net_device *); -void emac_mal_dump(struct net_device *); -#else -#define emac_serr_dump_0(dev) do { } while (0) -#define emac_serr_dump_1(dev) do { } while (0) -#define emac_err_dump(dev,x) do { } while (0) -#define emac_phy_dump(dev) do { } while (0) -#define emac_desc_dump(dev) do { } while (0) -#define emac_mac_dump(dev) do { } while (0) -#define emac_mal_dump(dev) do { } while (0) -#endif + +/* Normal TX/RX Statistics */ +struct ibm_emac_stats { + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; + u64 rx_packets_csum; + u64 tx_packets_csum; +}; + +/* Error statistics */ +struct ibm_emac_error_stats { + u64 tx_undo; + + /* Software RX Errors */ + u64 rx_dropped_stack; + u64 rx_dropped_oom; + u64 rx_dropped_error; + u64 rx_dropped_resize; + u64 rx_dropped_mtu; + u64 rx_stopped; + /* BD reported RX errors */ + u64 rx_bd_errors; + u64 rx_bd_overrun; + u64 rx_bd_bad_packet; + u64 rx_bd_runt_packet; + u64 rx_bd_short_event; + u64 rx_bd_alignment_error; + u64 rx_bd_bad_fcs; + u64 rx_bd_packet_too_long; + u64 rx_bd_out_of_range; + u64 rx_bd_in_range; + /* EMAC IRQ reported RX errors */ + u64 rx_parity; + u64 rx_fifo_overrun; + u64 rx_overrun; + u64 rx_bad_packet; + u64 rx_runt_packet; + u64 rx_short_event; + u64 rx_alignment_error; + u64 rx_bad_fcs; + u64 rx_packet_too_long; + u64 rx_out_of_range; + u64 rx_in_range; + + /* Software TX Errors */ + u64 tx_dropped; + /* BD reported TX errors */ + u64 tx_bd_errors; + u64 tx_bd_bad_fcs; + u64 tx_bd_carrier_loss; + u64 tx_bd_excessive_deferral; + u64 tx_bd_excessive_collisions; + u64 tx_bd_late_collision; + u64 tx_bd_multple_collisions; + u64 tx_bd_single_collision; + u64 tx_bd_underrun; + u64 tx_bd_sqe; + /* EMAC IRQ reported TX errors */ + u64 tx_parity; + u64 tx_underrun; + u64 tx_sqe; + u64 tx_errors; +}; + +#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \ + sizeof(struct ibm_emac_error_stats)) \ + / sizeof(u64)) struct ocp_enet_private { - struct sk_buff *tx_skb[NUM_TX_BUFF]; - struct sk_buff *rx_skb[NUM_RX_BUFF]; - struct mal_descriptor *tx_desc; - struct mal_descriptor *rx_desc; - struct mal_descriptor *rx_dirty; - struct net_device_stats stats; - int tx_cnt; - int rx_slot; - int dirty_rx; - int tx_slot; - int ack_slot; - int rx_buffer_size; - - struct mii_phy phy_mii; - int mii_phy_addr; - int want_autoneg; - int timer_ticks; - struct timer_list link_timer; - struct net_device *mdio_dev; - - struct ocp_device *rgmii_dev; - int rgmii_input; - - struct ocp_device *zmii_dev; - int zmii_input; - - struct ibm_ocp_mal *mal; - int mal_tx_chan, mal_rx_chan; - struct mal_commac commac; - - struct ocp_device *tah_dev; - - int opened; - int going_away; - int wol_irq; - emac_t *emacp; - struct ocp_device *ocpdev; - struct net_device *ndev; - spinlock_t lock; + struct net_device *ndev; /* 0 */ + struct emac_regs __iomem *emacp; + + struct mal_descriptor *tx_desc; + int tx_cnt; + int tx_slot; + int ack_slot; + + struct mal_descriptor *rx_desc; + int rx_slot; + struct sk_buff *rx_sg_skb; /* 1 */ + int rx_skb_size; + int rx_sync_size; + + struct ibm_emac_stats stats; + struct ocp_device *tah_dev; + + struct ibm_ocp_mal *mal; + struct mal_commac commac; + + struct sk_buff *tx_skb[NUM_TX_BUFF]; + struct sk_buff *rx_skb[NUM_RX_BUFF]; + + struct ocp_device *zmii_dev; + int zmii_input; + struct ocp_enet_private *mdio_dev; + struct ocp_device *rgmii_dev; + int rgmii_input; + + struct ocp_def *def; + + struct mii_phy phy; + struct timer_list link_timer; + int reset_failed; + + int stop_timeout; /* in us */ + + struct ibm_emac_error_stats estats; + struct net_device_stats nstats; + + struct device* ldev; +}; + +/* Ethtool get_regs complex data. + * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH + * when available. + * + * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, + * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. + * Each register component is preceded with emac_ethtool_regs_subhdr. + * Order of the optional headers follows their relative bit posititions + * in emac_ethtool_regs_hdr.components + */ +#define EMAC_ETHTOOL_REGS_ZMII 0x00000001 +#define EMAC_ETHTOOL_REGS_RGMII 0x00000002 +#define EMAC_ETHTOOL_REGS_TAH 0x00000004 + +struct emac_ethtool_regs_hdr { + u32 components; +}; + +struct emac_ethtool_regs_subhdr { + u32 version; + u32 index; }; -#endif /* _IBM_EMAC_CORE_H_ */ + +#endif /* __IBM_EMAC_CORE_H_ */