X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fne2k-pci.c;h=34bdba9eec79c3374f1632cc50062d0540ae0997;hb=7172c64a7cee4dfa95864f49c914f7ea8cf497c8;hp=31859c6bcf6dd599daebafa8153fb6ce45d10d04;hpb=5273a3df6485dc2ad6aa7ddd441b9a21970f003b;p=linux-2.6.git

diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index 31859c6bc..34bdba9ee 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -77,9 +77,9 @@ MODULE_AUTHOR("Donald Becker / Paul Gortmaker");
 MODULE_DESCRIPTION("PCI NE2000 clone driver");
 MODULE_LICENSE("GPL");
 
-MODULE_PARM(debug, "i");
-MODULE_PARM(options, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i");
+module_param(debug, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
 MODULE_PARM_DESC(debug, "debug level (1-2)");
 MODULE_PARM_DESC(options, "Bit 5: full duplex");
 MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)");
@@ -132,7 +132,7 @@ static struct {
 	{"Holtek HT80232", ONLY_16BIT_IO | HOLTEK_FDX},
 	{"Holtek HT80229", ONLY_32BIT_IO | HOLTEK_FDX | STOP_PG_0x60 },
 	{"Winbond W89C940(misprogrammed)", 0},
-	{0,}
+	{NULL,}
 };
 
 
@@ -231,12 +231,12 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
 	irq = pdev->irq;
 
 	if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) {
-		printk (KERN_ERR PFX "no I/O resource at PCI BAR #0\n");
+		dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n");
 		return -ENODEV;
 	}
 
 	if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) {
-		printk (KERN_ERR PFX "I/O resource 0x%x @ 0x%lx busy\n",
+		dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n",
 			NE_IO_EXTENT, ioaddr);
 		return -EBUSY;
 	}
@@ -263,7 +263,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
 	/* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */
 	dev = alloc_ei_netdev();
 	if (!dev) {
-		printk (KERN_ERR PFX "cannot allocate ethernet device\n");
+		dev_err(&pdev->dev, "cannot allocate ethernet device\n");
 		goto err_out_free_res;
 	}
 	SET_MODULE_OWNER(dev);
@@ -281,7 +281,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
 		while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
 			/* Limit wait: '2' avoids jiffy roll-over. */
 			if (jiffies - reset_start_time > 2) {
-				printk(KERN_ERR PFX "Card failure (no reset ack).\n");
+				dev_err(&pdev->dev,
+					"Card failure (no reset ack).\n");
 				goto err_out_free_netdev;
 			}
 
@@ -372,6 +373,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
 		printk("%2.2X%s", SA_prom[i], i == 5 ? ".\n": ":");
 		dev->dev_addr[i] = SA_prom[i];
 	}
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
 	return 0;
 
@@ -419,7 +421,7 @@ static int ne2k_pci_set_fdx(struct net_device *dev)
 
 static int ne2k_pci_open(struct net_device *dev)
 {
-	int ret = request_irq(dev->irq, ei_interrupt, SA_SHIRQ, dev->name, dev);
+	int ret = request_irq(dev->irq, ei_interrupt, IRQF_SHARED, dev->name, dev);
 	if (ret)
 		return ret;
 
@@ -637,15 +639,14 @@ static struct ethtool_ops ne2k_pci_ethtool_ops = {
 	.get_drvinfo		= ne2k_pci_get_drvinfo,
 	.get_tx_csum		= ethtool_op_get_tx_csum,
 	.get_sg			= ethtool_op_get_sg,
+	.get_perm_addr		= ethtool_op_get_perm_addr,
 };
 
 static void __devexit ne2k_pci_remove_one (struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 
-	if (!dev)
-		BUG();
-
+	BUG_ON(!dev);
 	unregister_netdev(dev);
 	release_region(dev->base_addr, NE_IO_EXTENT);
 	free_netdev(dev);
@@ -653,12 +654,45 @@ static void __devexit ne2k_pci_remove_one (struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
+#ifdef CONFIG_PM
+static int ne2k_pci_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+
+	netif_device_detach(dev);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int ne2k_pci_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+
+	pci_set_power_state(pdev, 0);
+	pci_restore_state(pdev);
+	pci_enable_device(pdev);
+	NS8390_init(dev, 1);
+	netif_device_attach(dev);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
 
 static struct pci_driver ne2k_driver = {
 	.name		= DRV_NAME,
 	.probe		= ne2k_pci_init_one,
 	.remove		= __devexit_p(ne2k_pci_remove_one),
 	.id_table	= ne2k_pci_tbl,
+#ifdef CONFIG_PM
+	.suspend	= ne2k_pci_suspend,
+	.resume		= ne2k_pci_resume,
+#endif /* CONFIG_PM */
+
 };