X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fni5010.c;h=a68bf474f6ed8f05b4c24721b1a64fca026f8aa6;hb=9464c7cf61b9433057924c36e6e02f303a00e768;hp=d4be207d321a476aa2556f0df10e9391c91898f7;hpb=41689045f6a3cbe0550e1d34e9cc20d2e8c432ba;p=linux-2.6.git diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c index d4be207d3..a68bf474f 100644 --- a/drivers/net/ni5010.c +++ b/drivers/net/ni5010.c @@ -1,12 +1,17 @@ /* ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard. * - * Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr. + * Copyright 1996,1997 Jan-Pascal van Best and Andreas Mohr. * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * * The authors may be reached as: - * janpascal@vanbest.org andi@lisas.de + * jvbest@wi.leidenuniv.nl a.mohr@mailto.de + * or by snail mail as + * Jan-Pascal van Best Andreas Mohr + * Klikspaanweg 58-4 Stauferstr. 6 + * 2324 LZ Leiden D-71272 Renningen + * The Netherlands Germany * * Sources: * Donald Becker's "skeleton.c" @@ -22,9 +27,8 @@ * 970503 v0.93: Fixed auto-irq failure on warm reboot (JB) * 970623 v1.00: First kernel version (AM) * 970814 v1.01: Added detection of onboard receive buffer size (AM) - * 060611 v1.02: slight cleanup: email addresses, driver modernization. * Bugs: - * - not SMP-safe (no locking of I/O accesses) + * - None known... * - Note that you have to patch ifconfig for the new /proc/net/dev * format. It gives incorrect stats otherwise. * @@ -35,7 +39,7 @@ * Complete merge with Andreas' driver * Implement ring buffers (Is this useful? You can't squeeze * too many packet in a 2k buffer!) - * Implement DMA (Again, is this useful? Some docs say DMA is + * Implement DMA (Again, is this useful? Some docs says DMA is * slower than programmed I/O) * * Compile with: @@ -43,7 +47,7 @@ * -DMODULE -c ni5010.c * * Insert with e.g.: - * insmod ni5010.ko io=0x300 irq=5 + * insmod ni5010.o io=0x300 irq=5 */ #include @@ -65,15 +69,15 @@ #include "ni5010.h" -static const char boardname[] = "NI5010"; -static char version[] __initdata = - "ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n"; +static const char *boardname = "NI5010"; +static char *version = + "ni5010.c: v1.00 06/23/97 Jan-Pascal van Best and Andreas Mohr\n"; /* bufsize_rcv == 0 means autoprobing */ static unsigned int bufsize_rcv; -#define JUMPERED_INTERRUPTS /* IRQ line jumpered on board */ -#undef JUMPERED_DMA /* No DMA used */ +#define jumpered_interrupts /* IRQ line jumpered on board */ +#undef jumpered_dma /* No DMA used */ #undef FULL_IODETECT /* Only detect in portlist */ #ifndef FULL_IODETECT @@ -277,7 +281,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name)); -#ifdef JUMPERED_INTERRUPTS +#ifdef jumpered_interrupts if (dev->irq == 0xff) ; else if (dev->irq < 2) { @@ -301,7 +305,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) } else if (dev->irq == 2) { dev->irq = 9; } -#endif /* JUMPERED_INTERRUPTS */ +#endif /* jumpered_irq */ PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name)); /* DMA is not supported (yet?), so no use detecting it */ @@ -330,7 +334,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) outw(0, IE_GP); /* Point GP at start of packet */ outb(0, IE_RBUF); /* set buffer byte 0 to 0 again */ } - printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); + printk("// bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); memset(dev->priv, 0, sizeof(struct ni5010_local)); dev->open = ni5010_open; @@ -350,9 +354,11 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) outb(0xff, EDLC_XCLR); /* Kill all pending xmt interrupts */ printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq); - if (dev->dma) - printk(" & DMA %d", dev->dma); + if (dev->dma) printk(" & DMA %d", dev->dma); printk(".\n"); + + printk(KERN_INFO "Join the NI5010 driver development team!\n"); + printk(KERN_INFO "Mail to a.mohr@mailto.de or jvbest@wi.leidenuniv.nl\n"); return 0; out: release_region(dev->base_addr, NI5010_IO_EXTENT); @@ -365,7 +371,7 @@ out: * * This routine should set everything up anew at each open, even * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. + * there is non-reboot way to recover if something goes wrong. */ static int ni5010_open(struct net_device *dev) @@ -384,13 +390,13 @@ static int ni5010_open(struct net_device *dev) * Always allocate the DMA channel after the IRQ, * and clean up on failure. */ -#ifdef JUMPERED_DMA +#ifdef jumpered_dma if (request_dma(dev->dma, cardname)) { printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma); free_irq(dev->irq, NULL); return -EAGAIN; } -#endif /* JUMPERED_DMA */ +#endif /* jumpered_dma */ PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name)); /* Reset the hardware here. Don't forget to set the station address. */ @@ -627,7 +633,7 @@ static int ni5010_close(struct net_device *dev) int ioaddr = dev->base_addr; PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name)); -#ifdef JUMPERED_INTERRUPTS +#ifdef jumpered_interrupts free_irq(dev->irq, NULL); #endif /* Put card in held-RESET state */ @@ -765,7 +771,7 @@ module_param(irq, int, 0); MODULE_PARM_DESC(io, "ni5010 I/O base address"); MODULE_PARM_DESC(irq, "ni5010 IRQ number"); -static int __init ni5010_init_module(void) +int init_module(void) { PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname)); /* @@ -786,15 +792,13 @@ static int __init ni5010_init_module(void) return 0; } -static void __exit ni5010_cleanup_module(void) +void cleanup_module(void) { PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname)); unregister_netdev(dev_ni5010); release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT); free_netdev(dev_ni5010); } -module_init(ni5010_init_module); -module_exit(ni5010_cleanup_module); #endif /* MODULE */ MODULE_LICENSE("GPL");