X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fs2io.h;h=9a1737522f0f1f59a22bc7d98784667a85422ef0;hb=6a77f38946aaee1cd85eeec6cf4229b204c15071;hp=e9a16645065643b2f9a027edd1d52f74168aafc6;hpb=9bf4aaab3e101692164d49b7ca357651eb691cb6;p=linux-2.6.git

diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index e9a166450..9a1737522 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -16,6 +16,7 @@
 #define TBD 0
 #define BIT(loc)		(0x8000000000000000ULL >> (loc))
 #define vBIT(val, loc, sz)	(((u64)val) << (64-loc-sz))
+#define INV(d)  ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff)
 
 #ifndef BOOL
 #define BOOL    int
@@ -52,8 +53,6 @@ typedef enum xena_max_outstanding_splits {
 /*
  * Debug related variables.
  */
-#define DEBUG_ON TRUE
-
 /* different debug levels. */
 #define	ERR_DBG		0
 #define	INIT_DBG	1
@@ -62,7 +61,7 @@ typedef enum xena_max_outstanding_splits {
 #define	INTR_DBG	4
 
 /* Global variable that defines the present debug level of the driver. */
-int debug_level = ERR_DBG;	/* Default level. */
+static int debug_level = ERR_DBG;	/* Default level. */
 
 /* DEBUG message print. */
 #define DBG_PRINT(dbg_level, args...)  if(!(debug_level<dbg_level)) printk(args)
@@ -312,7 +311,7 @@ typedef struct stat_block {
 /* Maintains Per FIFO related information. */
 typedef struct tx_fifo_config {
 #define	MAX_AVAILABLE_TXDS	8192
-	u32 FifoLen;		/* specifies len of FIFO upto 8192, ie no of TxDLs */
+	u32 fifo_len;		/* specifies len of FIFO upto 8192, ie no of TxDLs */
 /* Priority definition */
 #define TX_FIFO_PRI_0               0	/*Highest */
 #define TX_FIFO_PRI_1               1
@@ -322,9 +321,9 @@ typedef struct tx_fifo_config {
 #define TX_FIFO_PRI_5               5
 #define TX_FIFO_PRI_6               6
 #define TX_FIFO_PRI_7               7	/*lowest */
-	u8 FifoPriority;	/* specifies pointer level for FIFO */
+	u8 fifo_priority;	/* specifies pointer level for FIFO */
 	/* user should not set twos fifos with same pri */
-	u8 fNoSnoop;
+	u8 f_no_snoop;
 #define NO_SNOOP_TXD                0x01
 #define NO_SNOOP_TXD_BUFFER          0x02
 } tx_fifo_config_t;
@@ -332,7 +331,7 @@ typedef struct tx_fifo_config {
 
 /* Maintains per Ring related information */
 typedef struct rx_ring_config {
-	u32 NumRxd;		/*No of RxDs per Rx Ring */
+	u32 num_rxd;		/*No of RxDs per Rx Ring */
 #define RX_RING_PRI_0               0	/* highest */
 #define RX_RING_PRI_1               1
 #define RX_RING_PRI_2               2
@@ -342,70 +341,37 @@ typedef struct rx_ring_config {
 #define RX_RING_PRI_6               6
 #define RX_RING_PRI_7               7	/* lowest */
 
-	u8 RingPriority;	/*Specifies service priority of ring */
+	u8 ring_priority;	/*Specifies service priority of ring */
 	/* OSM should not set any two rings with same priority */
-	u8 RingOrg;		/*Organization of ring */
-#define RING_ORG_BUFF1           0x01
-#define RX_RING_ORG_BUFF3           0x03
-#define RX_RING_ORG_BUFF5           0x05
-
-/* In case of 3 buffer recv. mode, size of three buffers is expected as.. */
-#define BUFF_SZ_1                   22	/* ethernet header */
-#define BUFF_SZ_2                   (64+64)	/* max. IP+TCP header size */
-#define BUFF_SZ_3                   (1500-20-20)	/* TCP payload */
-#define BUFF_SZ_3_JUMBO             (9600-20-20)	/* Jumbo TCP payload */
-
-	u32 RxdThresh;		/*No of used Rxds NIC can store before transfer to host */
-#define DEFAULT_RXD_THRESHOLD       0x1	/* TODO */
-	u8 fNoSnoop;
+	u8 ring_org;		/*Organization of ring */
+#define RING_ORG_BUFF1		0x01
+#define RX_RING_ORG_BUFF3	0x03
+#define RX_RING_ORG_BUFF5	0x05
+
+	u8 f_no_snoop;
 #define NO_SNOOP_RXD                0x01
 #define NO_SNOOP_RXD_BUFFER         0x02
-	u32 RxD_BackOff_Interval;
-#define RXD_BACKOFF_INTERVAL_DEF        0x0
-#define RXD_BACKOFF_INTERVAL_MIN        0x0
-#define RXD_BACKOFF_INTERVAL_MAX        0x0
 } rx_ring_config_t;
 
 /* This structure provides contains values of the tunable parameters 
  * of the H/W 
  */
 struct config_param {
-
 /* Tx Side */
-	u32 TxFIFONum;		/*Number of Tx FIFOs */
+	u32 tx_fifo_num;	/*Number of Tx FIFOs */
 #define MAX_TX_FIFOS 8
 
-	tx_fifo_config_t TxCfg[MAX_TX_FIFOS];	/*Per-Tx FIFO config */
-	u32 MaxTxDs;		/*Max no. of Tx buffer descriptor per TxDL */
-	BOOL TxVLANEnable;	/*TRUE: Insert VLAN ID, FALSE: Don't insert */
-#define TX_REQ_TIMEOUT_DEFAULT          0x0
-#define TX_REQ_TIMEOUT_MIN              0x0
-#define TX_REQ_TIMEOUT_MAX              0x0
-	u32 TxReqTimeOut;
-	BOOL TxFlow;		/*Tx flow control enable */
-	BOOL RxFlow;
-	BOOL OverrideTxServiceState;	/* TRUE: Overide, FALSE: Do not override 
-					   Use the new priority information
-					   of service state. It is not recommended
-					   to change but OSM can opt to do so */
-#define MAX_SERVICE_STATES  36
-	u8 TxServiceState[MAX_SERVICE_STATES];
-	/* Array element represent 'priority' 
-	 * and array index represents
-	 *  'Service state' e.g. 
-	 *  TxServiceState[3]=7; it means 
-	 *  Service state 3 is associated 
-	 *  with priority 7 of a Tx FIFO */
-	u64 TxIntrType;		/* Specifies if Tx Intr is UTILZ or PER_LIST type. */
+	tx_fifo_config_t tx_cfg[MAX_TX_FIFOS];	/*Per-Tx FIFO config */
+	u32 max_txds;		/*Max no. of Tx buffer descriptor per TxDL */
+	u64 tx_intr_type;
+	/* Specifies if Tx Intr is UTILZ or PER_LIST type. */
 
 /* Rx Side */
-	u32 RxRingNum;		/*Number of receive rings */
+	u32 rx_ring_num;	/*Number of receive rings */
 #define MAX_RX_RINGS 8
 #define MAX_RX_BLOCKS_PER_RING  150
 
-	rx_ring_config_t RxCfg[MAX_RX_RINGS];	/*Per-Rx Ring config */
-	BOOL RxVLANEnable;	/*TRUE: Strip off VLAN tag from the frame,
-				   FALSE: Don't strip off VLAN tag */
+	rx_ring_config_t rx_cfg[MAX_RX_RINGS];	/*Per-Rx Ring config */
 
 #define HEADER_ETHERNET_II_802_3_SIZE 14
 #define HEADER_802_2_SIZE              3
@@ -419,23 +385,6 @@ struct config_param {
 #define MAX_PYLD_JUMBO              9600
 #define MAX_MTU_JUMBO               (MAX_PYLD_JUMBO+18)
 #define MAX_MTU_JUMBO_VLAN          (MAX_PYLD_JUMBO+22)
-	u32 MTU;		/*Maximum Payload */
-	BOOL JumboEnable;	/*Enable Jumbo frames recv/send */
-	BOOL OverrideRxServiceState;	/* TRUE: Overide, FALSE: Do not override 
-					   Use the new priority information
-					   of service state. It is not recommended
-					   to change but OSM can opt to do so */
-#define MAX_SERVICE_STATES  36
-	u8 RxServiceState[MAX_SERVICE_STATES];
-	/* Array element represent 'priority' 
-	 * and array index represents 
-	 * 'Service state'e.g. 
-	 * RxServiceState[3]=7; it means 
-	 * Service state 3 is associated 
-	 * with priority 7 of a Rx FIFO */
-	BOOL StatAutoRefresh;	/* When true, StatRefreshTime have valid value */
-	u32 StatRefreshTime;	/*Time for refreshing statistics */
-#define     STAT_TRSF_PER_1_SECOND      0x208D5
 };
 
 /* Structure representing MAC Addrs */
@@ -491,6 +440,12 @@ typedef struct _TxD {
 	u64 Host_Control;	/* reserved for host */
 } TxD_t;
 
+/* Structure to hold the phy and virt addr of every TxDL. */
+typedef struct list_info_hold {
+	dma_addr_t list_phy_addr;
+	void *list_virt_addr;
+} list_info_hold_t;
+
 /* Rx descriptor structure */
 typedef struct _RxD_t {
 	u64 Host_Control;	/* reserved for host */
@@ -507,36 +462,80 @@ typedef struct _RxD_t {
 #define RXD_GET_L4_CKSUM(val)   ((u16)(val) & 0xFFFF)
 
 	u64 Control_2;
+#ifndef CONFIG_2BUFF_MODE
 #define MASK_BUFFER0_SIZE       vBIT(0xFFFF,0,16)
 #define SET_BUFFER0_SIZE(val)   vBIT(val,0,16)
+#else
+#define MASK_BUFFER0_SIZE       vBIT(0xFF,0,16)
+#define MASK_BUFFER1_SIZE       vBIT(0xFFFF,16,16)
+#define MASK_BUFFER2_SIZE       vBIT(0xFFFF,32,16)
+#define SET_BUFFER0_SIZE(val)   vBIT(val,8,8)
+#define SET_BUFFER1_SIZE(val)   vBIT(val,16,16)
+#define SET_BUFFER2_SIZE(val)   vBIT(val,32,16)
+#endif
+
 #define MASK_VLAN_TAG           vBIT(0xFFFF,48,16)
 #define SET_VLAN_TAG(val)       vBIT(val,48,16)
 #define SET_NUM_TAG(val)       vBIT(val,16,32)
 
+#ifndef CONFIG_2BUFF_MODE
 #define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0xFFFF,0,16)))
-/*    
-#define TXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) >> (63-31))  
-#define TXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) >> (63-47))  
-*/
+#else
+#define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \
+							>> 48)
+#define RXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) \
+							>> 32)
+#define RXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) \
+							>> 16)
+#define BUF0_LEN	40
+#define BUF1_LEN	1
+#endif
+
 	u64 Buffer0_ptr;
+#ifdef CONFIG_2BUFF_MODE
+	u64 Buffer1_ptr;
+	u64 Buffer2_ptr;
+#endif
 } RxD_t;
 
-
 /* Structure that represents the Rx descriptor block which contains 
  * 128 Rx descriptors.
  */
+#ifndef CONFIG_2BUFF_MODE
 typedef struct _RxD_block {
 #define MAX_RXDS_PER_BLOCK             127
 	RxD_t rxd[MAX_RXDS_PER_BLOCK];
 
 	u64 reserved_0;
 #define END_OF_BLOCK    0xFEFFFFFFFFFFFFFFULL
-	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last Rxd in this blk */
-	u64 reserved_2_pNext_RxD_block;	/*@ Logical ptr to next */
-	u64 pNext_RxD_Blk_physical;	/* Buff0_ptr.
-					   In a 32 bit arch the upper 32 bits 
-					   should be 0 */
+	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last 
+				 * Rxd in this blk */
+	u64 reserved_2_pNext_RxD_block;	/* Logical ptr to next */
+	u64 pNext_RxD_Blk_physical;	/* Buff0_ptr.In a 32 bit arch
+					 * the upper 32 bits should 
+					 * be 0 */
 } RxD_block_t;
+#else
+typedef struct _RxD_block {
+#define MAX_RXDS_PER_BLOCK             85
+	RxD_t rxd[MAX_RXDS_PER_BLOCK];
+
+#define END_OF_BLOCK    0xFEFFFFFFFFFFFFFFULL
+	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last Rxd 
+				 * in this blk */
+	u64 pNext_RxD_Blk_physical;	/* Phy ponter to next blk. */
+} RxD_block_t;
+#define SIZE_OF_BLOCK	4096
+
+/* Structure to hold virtual addresses of Buf0 and Buf1 in 
+ * 2buf mode. */
+typedef struct bufAdd {
+	void *ba_0_org;
+	void *ba_1_org;
+	void *ba_0;
+	void *ba_1;
+} buffAdd_t;
+#endif
 
 /* Structure which stores all the MAC control parameters */
 
@@ -568,10 +567,6 @@ typedef tx_curr_get_info_t tx_curr_put_info_t;
  */
 typedef struct mac_info {
 /* rx side stuff */
-	u32 rxd_ring_mem_sz;
-	RxD_t *RxRing[MAX_RX_RINGS];	/* Logical Rx ring pointers */
-	dma_addr_t RxRing_Phy[MAX_RX_RINGS];
-
 	/* Put pointer info which indictes which RxD has to be replenished 
 	 * with a new buffer.
 	 */
@@ -583,41 +578,21 @@ typedef struct mac_info {
 	rx_curr_get_info_t rx_curr_get_info[MAX_RX_RINGS];
 
 	u16 rmac_pause_time;
-
-	/* this will be used in receive function, this decides which ring would
-	   be processed first. eg: ring with priority value 0 (highest) should
-	   be processed first. 
-	   first 3 LSB bits represent ring number which should be processed 
-	   first, similarly next 3 bits represent next ring to be processed.
-	   eg: value of _rx_ring_pri_map = 0x0000 003A means 
-	   ring #2 would be processed first and #7 would be processed next
-	 */
-	u32 _rx_ring_pri_map;
+	u16 mc_pause_threshold_q0q3;
+	u16 mc_pause_threshold_q4q7;
 
 /* tx side stuff */
-	void *txd_list_mem;	/* orignal pointer to allocated mem */
-	dma_addr_t txd_list_mem_phy;
-	u32 txd_list_mem_sz;
-
 	/* logical pointer of start of each Tx FIFO */
-	TxFIFO_element_t *tx_FIFO_start[MAX_TX_FIFOS];
-
-	/* logical pointer of start of TxDL which corresponds to each Tx FIFO */
-	TxD_t *txdl_start[MAX_TX_FIFOS];
-
-	/* Same as txdl_start but phy addr */
-	dma_addr_t txdl_start_phy[MAX_TX_FIFOS];
+	TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS];
 
 /* Current offset within tx_FIFO_start, where driver would write new Tx frame*/
 	tx_curr_put_info_t tx_curr_put_info[MAX_TX_FIFOS];
 	tx_curr_get_info_t tx_curr_get_info[MAX_TX_FIFOS];
 
-	u16 txdl_len;		/* length of a TxDL, same for all */
-
 	void *stats_mem;	/* orignal pointer to allocated mem */
 	dma_addr_t stats_mem_phy;	/* Physical address of the stat block */
 	u32 stats_mem_sz;
-	StatInfo_t *StatsInfo;	/* Logical address of the stat block */
+	StatInfo_t *stats_info;	/* Logical address of the stat block */
 } mac_info_t;
 
 /* structure representing the user defined MAC addresses */
@@ -632,17 +607,24 @@ typedef struct rx_block_info {
 	dma_addr_t block_dma_addr;
 } rx_block_info_t;
 
+/* Default Tunable parameters of the NIC. */
+#define DEFAULT_FIFO_LEN 4096
+#define SMALL_RXD_CNT	30 * (MAX_RXDS_PER_BLOCK+1)
+#define LARGE_RXD_CNT	100 * (MAX_RXDS_PER_BLOCK+1)
+#define SMALL_BLK_CNT	30
+#define LARGE_BLK_CNT	100
+
 /* Structure representing one instance of the NIC */
 typedef struct s2io_nic {
 #define MAX_MAC_SUPPORTED   16
 #define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
 
-	macaddr_t defMacAddr[MAX_MAC_SUPPORTED];
-	macaddr_t preMacAddr[MAX_MAC_SUPPORTED];
+	macaddr_t def_mac_addr[MAX_MAC_SUPPORTED];
+	macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED];
 
 	struct net_device_stats stats;
-	caddr_t bar0;
-	caddr_t bar1;
+	void __iomem *bar0;
+	void __iomem *bar1;
 	struct config_param config;
 	mac_info_t mac_control;
 	int high_dma_flag;
@@ -651,7 +633,7 @@ typedef struct s2io_nic {
 
 	char name[32];
 	struct tasklet_struct task;
-	atomic_t tasklet_status;
+	volatile unsigned long tasklet_status;
 	struct timer_list timer;
 	struct net_device *dev;
 	struct pci_dev *pdev;
@@ -667,12 +649,13 @@ typedef struct s2io_nic {
 	u8 cache_line;
 	u32 rom_expansion;
 	u16 pcix_cmd;
-	u32 config_space[256 / sizeof(u32)];
 	u32 irq;
 	atomic_t rx_bufs_left[MAX_RX_RINGS];
 
-	spinlock_t isr_lock;
 	spinlock_t tx_lock;
+#ifndef CONFIG_S2IO_NAPI
+	spinlock_t put_lock;
+#endif
 
 #define PROMISC     1
 #define ALL_MULTI   2
@@ -691,23 +674,22 @@ typedef struct s2io_nic {
 	u16 tx_err_count;
 	u16 rx_err_count;
 
-#if DEBUG_ON
-	u64 rxpkt_bytes;
-	u64 txpkt_bytes;
-	int int_cnt;
-	int rxint_cnt;
-	int txint_cnt;
-	u64 rxpkt_cnt;
+#ifndef CONFIG_S2IO_NAPI
+	/* Index to the absolute position of the put pointer of Rx ring. */
+	int put_pos[MAX_RX_RINGS];
 #endif
 
-	/*  Place holders for the virtual and physical addresses of 
+	/*
+	 *  Place holders for the virtual and physical addresses of 
 	 *  all the Rx Blocks
 	 */
-	struct rx_block_info
-	 rx_blocks[MAX_RX_RINGS][MAX_RX_BLOCKS_PER_RING];
+	rx_block_info_t rx_blocks[MAX_RX_RINGS][MAX_RX_BLOCKS_PER_RING];
 	int block_count[MAX_RX_RINGS];
 	int pkt_cnt[MAX_RX_RINGS];
 
+	/* Place holder of all the TX List's Phy and Virt addresses. */
+	list_info_hold_t *list_info[MAX_TX_FIFOS];
+
 	/*  Id timer, used to blink NIC to physically identify NIC. */
 	struct timer_list id_timer;
 
@@ -737,22 +719,26 @@ typedef struct s2io_nic {
 	u16 last_link_state;
 #define	LINK_DOWN	1
 #define	LINK_UP		2
+
+#ifdef CONFIG_2BUFF_MODE
+	/* Buffer Address store. */
+	buffAdd_t **ba[MAX_RX_RINGS];
+#endif
+	int task_flag;
+#define CARD_DOWN 1
+#define CARD_UP 2
+	atomic_t card_state;
+	volatile unsigned long link_state;
 } nic_t;
 
 #define RESET_ERROR 1;
 #define CMD_ERROR   2;
 
-/* Default Tunable parameters of the NIC. */
-#define DEFAULT_FIFO_LEN 4096
-#define SMALL_RXD_CNT	40 * (MAX_RXDS_PER_BLOCK+1)
-#define LARGE_RXD_CNT	100 * (MAX_RXDS_PER_BLOCK+1)
-
 /*  OS related system calls */
 #ifndef readq
-static inline u64 readq(void *addr)
+static inline u64 readq(void __iomem *addr)
 {
-	u64 ret = 0;
-	ret = readl(addr + 4);
+	u64 ret = readl(addr + 4);
 	ret <<= 32;
 	ret |= readl(addr);
 
@@ -761,11 +747,32 @@ static inline u64 readq(void *addr)
 #endif
 
 #ifndef writeq
-static inline void writeq(u64 val, void *addr)
+static inline void writeq(u64 val, void __iomem *addr)
 {
 	writel((u32) (val), addr);
 	writel((u32) (val >> 32), (addr + 4));
 }
+
+/* In 32 bit modes, some registers have to be written in a 
+ * particular order to expect correct hardware operation. The
+ * macro SPECIAL_REG_WRITE is used to perform such ordered 
+ * writes. Defines UF (Upper First) and LF (Lower First) will 
+ * be used to specify the required write order.
+ */
+#define UF	1
+#define LF	2
+static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
+{
+	if (order == LF) {
+		writel((u32) (val), addr);
+		writel((u32) (val >> 32), (addr + 4));
+	} else {
+		writel((u32) (val >> 32), (addr + 4));
+		writel((u32) (val), addr);
+	}
+}
+#else
+#define SPECIAL_REG_WRITE(val, addr, dummy) writeq(val, addr)
 #endif
 
 /*  Interrupt related values of Xena */
@@ -816,30 +823,41 @@ static inline void writeq(u64 val, void *addr)
 
 /*  DMA level Inressupts */
 #define TXDMA_PFC_INT_M     BIT(0)
-    /*  PFC block interrupts */
+#define TXDMA_PCC_INT_M     BIT(2)
+
+/*  PFC block interrupts */
 #define PFC_MISC_ERR_1      BIT(0)	/* Interrupt to indicate FIFO full */
 
+/* PCC block interrupts. */
+#define	PCC_FB_ECC_ERR	   vBIT(0xff, 16, 8)	/* Interrupt to indicate
+						   PCC_FB_ECC Error. */
+
 /*
  * Prototype declaration.
  */
 static int __devinit s2io_init_nic(struct pci_dev *pdev,
 				   const struct pci_device_id *pre);
 static void __devexit s2io_rem_nic(struct pci_dev *pdev);
-static int initSharedMem(struct s2io_nic *sp);
-static void freeSharedMem(struct s2io_nic *sp);
-static int initNic(struct s2io_nic *nic);
+static int init_shared_mem(struct s2io_nic *sp);
+static void free_shared_mem(struct s2io_nic *sp);
+static int init_nic(struct s2io_nic *nic);
 #ifndef CONFIG_S2IO_NAPI
-static void rxIntrHandler(struct s2io_nic *sp);
+static void rx_intr_handler(struct s2io_nic *sp);
 #endif
-static void txIntrHandler(struct s2io_nic *sp);
-static void alarmIntrHandler(struct s2io_nic *sp);
+static void tx_intr_handler(struct s2io_nic *sp);
+static void alarm_intr_handler(struct s2io_nic *sp);
 
 static int s2io_starter(void);
 void s2io_closer(void);
 static void s2io_tx_watchdog(struct net_device *dev);
 static void s2io_tasklet(unsigned long dev_addr);
 static void s2io_set_multicast(struct net_device *dev);
-static int rxOsmHandler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no);
+#ifndef CONFIG_2BUFF_MODE
+static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no);
+#else
+static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
+			  buffAdd_t * ba);
+#endif
 void s2io_link(nic_t * sp, int link);
 void s2io_reset(nic_t * sp);
 #ifdef CONFIG_S2IO_NAPI
@@ -850,5 +868,8 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
 static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
 static int verify_xena_quiescence(u64 val64, int flag);
 static struct ethtool_ops netdev_ethtool_ops;
+static void s2io_set_link(unsigned long data);
+static void s2io_card_down(nic_t * nic);
+static int s2io_card_up(nic_t * nic);
 
 #endif				/* _S2IO_H */