X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fsis900.c;h=ed02d0cb592450c61afb663ace8205edd7b0d8da;hb=352771d8dfacc828fdee58d5def490d5fb480c83;hp=aa045b62c335413e64febeb5815f89c58eb91464;hpb=836b7aab793962aeac45cedd049970ca058258d5;p=linux-2.6.git diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index aa045b62c..ed02d0cb5 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -64,9 +64,9 @@ #include #include #include +#include #include /* Processor type for cache alignment. */ -#include #include #include /* User space memory access functions */ @@ -116,6 +116,7 @@ static struct mii_chip_info { #define HOME 0x0001 #define LAN 0x0002 #define MIX 0x0003 +#define UNKNOWN 0x0 } mii_chip_table[] = { { "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN }, { "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN }, @@ -123,9 +124,10 @@ static struct mii_chip_info { { "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME}, { "ICS LAN PHY", 0x0015, 0xF440, LAN }, { "NS 83851 PHY", 0x2000, 0x5C20, MIX }, + { "NS 83847 PHY", 0x2000, 0x5C30, MIX }, { "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN }, { "VIA 6103 PHY", 0x0101, 0x8f20, LAN }, - {0,}, + {NULL,}, }; struct mii_phy { @@ -138,9 +140,9 @@ struct mii_phy { }; typedef struct _BufferDesc { - u32 link; - u32 cmdsts; - u32 bufptr; + u32 link; + u32 cmdsts; + u32 bufptr; } BufferDesc; struct sis900_private { @@ -154,7 +156,7 @@ struct sis900_private { unsigned int cur_phy; struct timer_list timer; /* Link status detection timer. */ - u8 autong_complete; /* 1: auto-negotiate complete */ + u8 autong_complete; /* 1: auto-negotiate complete */ unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */ unsigned int cur_tx, dirty_tx; @@ -168,9 +170,8 @@ struct sis900_private { dma_addr_t tx_ring_dma; dma_addr_t rx_ring_dma; - unsigned int tx_full; /* The Tx queue is full. */ + unsigned int tx_full; /* The Tx queue is full. */ u8 host_bridge_rev; - u32 pci_state[16]; }; MODULE_AUTHOR("Jim Huang , Ollie Lho "); @@ -254,19 +255,19 @@ static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_de * MAC address is read into @net_dev->dev_addr. */ -static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev) +static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, + struct net_device *net_dev) { struct pci_dev *isa_bridge = NULL; u8 reg; int i; - isa_bridge = pci_find_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge); + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge); + if (!isa_bridge) + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge); if (!isa_bridge) { - isa_bridge = pci_find_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge); - if (!isa_bridge) { - printk("%s: Can not find ISA bridge\n", net_dev->name); - return 0; - } + printk("%s: Can not find ISA bridge\n", net_dev->name); + return 0; } pci_read_config_byte(isa_bridge, 0x48, ®); pci_write_config_byte(isa_bridge, 0x48, reg | 0x40); @@ -276,6 +277,7 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, struct net_d ((u8 *)(net_dev->dev_addr))[i] = inb(0x71); } pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40); + pci_dev_put(isa_bridge); return 1; } @@ -291,7 +293,8 @@ static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev, struct net_d * @net_dev->dev_addr. */ -static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev) +static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, + struct net_device *net_dev) { long ioaddr = net_dev->base_addr; u32 rfcrSave; @@ -333,7 +336,8 @@ static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev, struct net_de * MAC address is read into @net_dev->dev_addr. */ -static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev) +static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, + struct net_device *net_dev) { long ioaddr = net_dev->base_addr; long ee_addr = ioaddr + mear; @@ -370,7 +374,8 @@ static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev, struct net_de * ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc. */ -static int __devinit sis900_probe (struct pci_dev *pci_dev, const struct pci_device_id *pci_id) +static int __devinit sis900_probe(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) { struct sis900_private *sis_priv; struct net_device *net_dev; @@ -483,9 +488,11 @@ static int __devinit sis900_probe (struct pci_dev *pci_dev, const struct pci_dev } /* save our host bridge revision */ - dev = pci_find_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL); - if (dev) + dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL); + if (dev) { pci_read_config_byte(dev, PCI_CLASS_REVISION, &sis_priv->host_bridge_rev); + pci_dev_put(dev); + } /* print some information about our NIC */ printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ", net_dev->name, @@ -521,7 +528,7 @@ static int __devinit sis900_probe (struct pci_dev *pci_dev, const struct pci_dev * return error if it failed to found. */ -static int __init sis900_mii_probe (struct net_device * net_dev) +static int __init sis900_mii_probe(struct net_device * net_dev) { struct sis900_private * sis_priv = net_dev->priv; u16 poll_bit = MII_STAT_LINK, status = 0; @@ -571,20 +578,23 @@ static int __init sis900_mii_probe (struct net_device * net_dev) mii_phy->phy_types = mii_chip_table[i].phy_types; if (mii_chip_table[i].phy_types == MIX) mii_phy->phy_types = - (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME; + (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME; printk(KERN_INFO "%s: %s transceiver found at address %d.\n", - net_dev->name, mii_chip_table[i].name, phy_addr); + net_dev->name, mii_chip_table[i].name, + phy_addr); break; } - if( !mii_chip_table[i].phy_id1 ) + if( !mii_chip_table[i].phy_id1 ) { printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n", - net_dev->name, phy_addr); + net_dev->name, phy_addr); + mii_phy->phy_types = UNKNOWN; + } } if (sis_priv->mii == NULL) { printk(KERN_INFO "%s: No MII transceivers found!\n", - net_dev->name); + net_dev->name); return 0; } @@ -608,7 +618,8 @@ static int __init sis900_mii_probe (struct net_device * net_dev) poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit); if (time_after_eq(jiffies, timeout)) { - printk(KERN_WARNING "%s: reset phy and link down now\n", net_dev->name); + printk(KERN_WARNING "%s: reset phy and link down now\n", + net_dev->name); return -ETIME; } } @@ -644,34 +655,41 @@ static int __init sis900_mii_probe (struct net_device * net_dev) static u16 sis900_default_phy(struct net_device * net_dev) { struct sis900_private * sis_priv = net_dev->priv; - struct mii_phy *phy = NULL, *phy_home = NULL, *default_phy = NULL; + struct mii_phy *phy = NULL, *phy_home = NULL, + *default_phy = NULL, *phy_lan = NULL; u16 status; - for( phy=sis_priv->first_mii; phy; phy=phy->next ){ + for (phy=sis_priv->first_mii; phy; phy=phy->next) { status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); status = mdio_read(net_dev, phy->phy_addr, MII_STATUS); - /* Link ON & Not select deafalut PHY */ - if ( (status & MII_STAT_LINK) && !(default_phy) ) + /* Link ON & Not select default PHY & not ghost PHY */ + if ((status & MII_STAT_LINK) && !default_phy && + (phy->phy_types != UNKNOWN)) default_phy = phy; - else{ + else { status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL); mdio_write(net_dev, phy->phy_addr, MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_ISOLATE); - if( phy->phy_types == HOME ) + if (phy->phy_types == HOME) phy_home = phy; + else if(phy->phy_types == LAN) + phy_lan = phy; } } - if( (!default_phy) && phy_home ) + if (!default_phy && phy_home) default_phy = phy_home; - else if(!default_phy) + else if (!default_phy && phy_lan) + default_phy = phy_lan; + else if (!default_phy) default_phy = sis_priv->first_mii; - if( sis_priv->mii != default_phy ){ + if (sis_priv->mii != default_phy) { sis_priv->mii = default_phy; sis_priv->cur_phy = default_phy->phy_addr; - printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", net_dev->name,sis_priv->cur_phy); + printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", + net_dev->name,sis_priv->cur_phy); } status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); @@ -694,7 +712,7 @@ static u16 sis900_default_phy(struct net_device * net_dev) * mii status register. It's necessary before auto-negotiate. */ -static void sis900_set_capability( struct net_device *net_dev , struct mii_phy *phy ) +static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy) { u16 cap; u16 status; @@ -844,7 +862,8 @@ static u16 mdio_read(struct net_device *net_dev, int phy_id, int location) * please see SiS7014 or ICS spec */ -static void mdio_write(struct net_device *net_dev, int phy_id, int location, int value) +static void mdio_write(struct net_device *net_dev, int phy_id, int location, + int value) { long mdio_addr = net_dev->base_addr + mear; int mii_cmd = MIIwrite|(phy_id<pci_dev, PCI_CLASS_REVISION, &revision); sis630_set_eq(net_dev, revision); - ret = request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ, net_dev->name, net_dev); + ret = request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ, + net_dev->name, net_dev); if (ret) return ret; @@ -1129,48 +1149,55 @@ static void sis630_set_eq(struct net_device *net_dev, u8 revision) return; if (netif_carrier_ok(net_dev)) { - reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); - mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (0x2200 | reg14h) & 0xBFFF); + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (0x2200 | reg14h) & 0xBFFF); for (i=0; i < maxcount; i++) { - eq_value=(0x00F8 & mdio_read(net_dev, sis_priv->cur_phy, MII_RESV)) >> 3; + eq_value = (0x00F8 & mdio_read(net_dev, + sis_priv->cur_phy, MII_RESV)) >> 3; if (i == 0) max_value=min_value=eq_value; - max_value=(eq_value > max_value) ? eq_value : max_value; - min_value=(eq_value < min_value) ? eq_value : min_value; + max_value = (eq_value > max_value) ? + eq_value : max_value; + min_value = (eq_value < min_value) ? + eq_value : min_value; } /* 630E rule to determine the equalizer value */ if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV || revision == SIS630ET_900_REV) { if (max_value < 5) - eq_value=max_value; + eq_value = max_value; else if (max_value >= 5 && max_value < 15) - eq_value=(max_value == min_value) ? max_value+2 : max_value+1; + eq_value = (max_value == min_value) ? + max_value+2 : max_value+1; else if (max_value >= 15) - eq_value=(max_value == min_value) ? max_value+6 : max_value+5; + eq_value=(max_value == min_value) ? + max_value+6 : max_value+5; } /* 630B0&B1 rule to determine the equalizer value */ if (revision == SIS630A_900_REV && (sis_priv->host_bridge_rev == SIS630B0 || sis_priv->host_bridge_rev == SIS630B1)) { if (max_value == 0) - eq_value=3; + eq_value = 3; else - eq_value=(max_value+min_value+1)/2; + eq_value = (max_value + min_value + 1)/2; } /* write equalizer value and setting */ - reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); - reg14h=(reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8); - reg14h=(reg14h | 0x6000) & 0xFDFF; + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + reg14h = (reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8); + reg14h = (reg14h | 0x6000) & 0xFDFF; mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h); - } - else { - reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); + } else { + reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV); if (revision == SIS630A_900_REV && (sis_priv->host_bridge_rev == SIS630B0 || sis_priv->host_bridge_rev == SIS630B1)) - mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2200) & 0xBFFF); + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (reg14h | 0x2200) & 0xBFFF); else - mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2000) & 0xBFFF); + mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, + (reg14h | 0x2000) & 0xBFFF); } return; } @@ -1198,7 +1225,8 @@ static void sis900_timer(unsigned long data) sis900_read_mode(net_dev, &speed, &duplex); if (duplex){ sis900_set_mode(net_dev->base_addr, speed, duplex); - pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision); + pci_read_config_byte(sis_priv->pci_dev, + PCI_CLASS_REVISION, &revision); sis630_set_eq(net_dev, revision); netif_start_queue(net_dev); } @@ -1222,9 +1250,8 @@ static void sis900_timer(unsigned long data) sis900_check_mode(net_dev, mii_phy); netif_carrier_on(net_dev); } - } + } else { /* Link ON -> OFF */ - else { if (!(status & MII_STAT_LINK)){ netif_carrier_off(net_dev); printk(KERN_INFO "%s: Media Link Off\n", net_dev->name); @@ -1234,7 +1261,8 @@ static void sis900_timer(unsigned long data) ((mii_phy->phy_id1 & 0xFFF0) == 0x8000)) sis900_reset_phy(net_dev, sis_priv->cur_phy); - pci_read_config_byte(sis_priv->pci_dev, PCI_CLASS_REVISION, &revision); + pci_read_config_byte(sis_priv->pci_dev, + PCI_CLASS_REVISION, &revision); sis630_set_eq(net_dev, revision); goto LookForLink; @@ -1257,18 +1285,18 @@ static void sis900_timer(unsigned long data) * and autong_complete should be set to 1. */ -static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy) +static void sis900_check_mode(struct net_device *net_dev, struct mii_phy *mii_phy) { struct sis900_private *sis_priv = net_dev->priv; long ioaddr = net_dev->base_addr; int speed, duplex; - if( mii_phy->phy_types == LAN ){ - outl( ~EXD & inl( ioaddr + cfg ), ioaddr + cfg); + if (mii_phy->phy_types == LAN) { + outl(~EXD & inl(ioaddr + cfg), ioaddr + cfg); sis900_set_capability(net_dev , mii_phy); sis900_auto_negotiate(net_dev, sis_priv->cur_phy); - }else{ - outl(EXD | inl( ioaddr + cfg ), ioaddr + cfg); + } else { + outl(EXD | inl(ioaddr + cfg), ioaddr + cfg); speed = HW_SPEED_HOME; duplex = FDX_CAPABLE_HALF_SELECTED; sis900_set_mode(ioaddr, speed, duplex); @@ -1293,20 +1321,20 @@ static void sis900_set_mode (long ioaddr, int speed, int duplex) { u32 tx_flags = 0, rx_flags = 0; - if( inl(ioaddr + cfg) & EDB_MASTER_EN ){ - tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift); + if (inl(ioaddr + cfg) & EDB_MASTER_EN) { + tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | + (TX_FILL_THRESH << TxFILLT_shift); rx_flags = DMA_BURST_64 << RxMXDMA_shift; - } - else{ - tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift); + } else { + tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | + (TX_FILL_THRESH << TxFILLT_shift); rx_flags = DMA_BURST_512 << RxMXDMA_shift; } - if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS ) { + if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) { rx_flags |= (RxDRNT_10 << RxDRNT_shift); tx_flags |= (TxDRNT_10 << TxDRNT_shift); - } - else { + } else { rx_flags |= (RxDRNT_100 << RxDRNT_shift); tx_flags |= (TxDRNT_100 << TxDRNT_shift); } @@ -1396,19 +1424,19 @@ static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex sis_priv->autong_complete = 1; /* Workaround for Realtek RTL8201 PHY issue */ - if((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)){ - if(mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX) + if ((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)) { + if (mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX) *duplex = FDX_CAPABLE_FULL_SELECTED; - if(mdio_read(net_dev, phy_addr, 0x0019) & 0x01) + if (mdio_read(net_dev, phy_addr, 0x0019) & 0x01) *speed = HW_SPEED_100_MBPS; } printk(KERN_INFO "%s: Media Link On %s %s-duplex \n", - net_dev->name, - *speed == HW_SPEED_100_MBPS ? - "100mbps" : "10mbps", - *duplex == FDX_CAPABLE_FULL_SELECTED ? - "full" : "half"); + net_dev->name, + *speed == HW_SPEED_100_MBPS ? + "100mbps" : "10mbps", + *duplex == FDX_CAPABLE_FULL_SELECTED ? + "full" : "half"); } /** @@ -1445,7 +1473,7 @@ static void sis900_tx_timeout(struct net_device *net_dev) sis_priv->tx_ring[i].bufptr, skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_irq(skb); - sis_priv->tx_skbuff[i] = 0; + sis_priv->tx_skbuff[i] = NULL; sis_priv->tx_ring[i].cmdsts = 0; sis_priv->tx_ring[i].bufptr = 0; sis_priv->stats.tx_dropped++; @@ -1670,13 +1698,13 @@ static int sis900_rx(struct net_device *net_dev) sis_priv->stats.rx_bytes += rx_size; sis_priv->stats.rx_packets++; - /* refill the Rx buffer, what if there is not enought memory for - new socket buffer ?? */ + /* refill the Rx buffer, what if there is not enought + * memory for new socket buffer ?? */ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { - /* not enough memory for skbuff, this makes a "hole" - on the buffer ring, it is not clear how the - hardware will react to this kind of degenerated - buffer */ + /* not enough memory for skbuff, this makes a + * "hole" on the buffer ring, it is not clear + * how the hardware will react to this kind + * of degenerated buffer */ printk(KERN_INFO "%s: Memory squeeze," "deferring packet.\n", net_dev->name); @@ -1700,8 +1728,8 @@ static int sis900_rx(struct net_device *net_dev) rx_status = sis_priv->rx_ring[entry].cmdsts; } // while - /* refill the Rx buffer, what if the rate of refilling is slower than - consuming ?? */ + /* refill the Rx buffer, what if the rate of refilling is slower + * than consuming ?? */ for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) { struct sk_buff *skb; @@ -1709,10 +1737,10 @@ static int sis900_rx(struct net_device *net_dev) if (sis_priv->rx_skbuff[entry] == NULL) { if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) { - /* not enough memory for skbuff, this makes a "hole" - on the buffer ring, it is not clear how the - hardware will react to this kind of degenerated - buffer */ + /* not enough memory for skbuff, this makes a + * "hole" on the buffer ring, it is not clear + * how the hardware will react to this kind + * of degenerated buffer */ printk(KERN_INFO "%s: Memory squeeze," "deferring packet.\n", net_dev->name); @@ -1757,8 +1785,8 @@ static void sis900_finish_xmit (struct net_device *net_dev) if (tx_status & OWN) { /* The packet is not transmitted yet (owned by hardware) ! - Note: the interrupt is generated only when Tx Machine - is idle, so this is an almost impossible case */ + * Note: the interrupt is generated only when Tx Machine + * is idle, so this is an almost impossible case */ break; } @@ -1796,8 +1824,8 @@ static void sis900_finish_xmit (struct net_device *net_dev) if (sis_priv->tx_full && netif_queue_stopped(net_dev) && sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) { - /* The ring is no longer full, clear tx_full and schedule more transmission - by netif_wake_queue(net_dev) */ + /* The ring is no longer full, clear tx_full and schedule + * more transmission by netif_wake_queue(net_dev) */ sis_priv->tx_full = 0; netif_wake_queue (net_dev); } @@ -1811,8 +1839,7 @@ static void sis900_finish_xmit (struct net_device *net_dev) * free Tx and RX socket buffer */ -static int -sis900_close(struct net_device *net_dev) +static int sis900_close(struct net_device *net_dev) { long ioaddr = net_dev->base_addr; struct sis900_private *sis_priv = net_dev->priv; @@ -1840,7 +1867,7 @@ sis900_close(struct net_device *net_dev) sis_priv->rx_ring[i].bufptr, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); - sis_priv->rx_skbuff[i] = 0; + sis_priv->rx_skbuff[i] = NULL; } } for (i = 0; i < NUM_TX_DESC; i++) { @@ -1850,7 +1877,7 @@ sis900_close(struct net_device *net_dev) sis_priv->tx_ring[i].bufptr, skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); - sis_priv->tx_skbuff[i] = 0; + sis_priv->tx_skbuff[i] = NULL; } } @@ -1948,27 +1975,28 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map) if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { /* we switch on the ifmap->port field. I couldn't find anything - like a definition or standard for the values of that field. - I think the meaning of those values is device specific. But - since I would like to change the media type via the ifconfig - command I use the definition from linux/netdevice.h - (which seems to be different from the ifport(pcmcia) definition) - */ + * like a definition or standard for the values of that field. + * I think the meaning of those values is device specific. But + * since I would like to change the media type via the ifconfig + * command I use the definition from linux/netdevice.h + * (which seems to be different from the ifport(pcmcia) definition) */ switch(map->port){ case IF_PORT_UNKNOWN: /* use auto here */ dev->if_port = map->port; - /* we are going to change the media type, so the Link will - be temporary down and we need to reflect that here. When - the Link comes up again, it will be sensed by the sis_timer - procedure, which also does all the rest for us */ + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ netif_carrier_off(dev); /* read current state */ status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); /* enable auto negotiation and reset the negotioation - (I don't really know what the auto negatiotiation reset - really means, but it sounds for me right to do one here)*/ + * (I don't really know what the auto negatiotiation + * reset really means, but it sounds for me right to + * do one here) */ mdio_write(dev, mii_phy->phy_addr, MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO); @@ -1977,10 +2005,11 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map) case IF_PORT_10BASET: /* 10BaseT */ dev->if_port = map->port; - /* we are going to change the media type, so the Link will - be temporary down and we need to reflect that here. When - the Link comes up again, it will be sensed by the sis_timer - procedure, which also does all the rest for us */ + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ netif_carrier_off(dev); /* set Speed to 10Mbps */ @@ -1989,24 +2018,27 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map) /* disable auto negotiation and force 10MBit mode*/ mdio_write(dev, mii_phy->phy_addr, - MII_CONTROL, status & ~(MII_CNTL_SPEED | MII_CNTL_AUTO)); + MII_CONTROL, status & ~(MII_CNTL_SPEED | + MII_CNTL_AUTO)); break; case IF_PORT_100BASET: /* 100BaseT */ case IF_PORT_100BASETX: /* 100BaseTx */ dev->if_port = map->port; - /* we are going to change the media type, so the Link will - be temporary down and we need to reflect that here. When - the Link comes up again, it will be sensed by the sis_timer - procedure, which also does all the rest for us */ + /* we are going to change the media type, so the Link + * will be temporary down and we need to reflect that + * here. When the Link comes up again, it will be + * sensed by the sis_timer procedure, which also does + * all the rest for us */ netif_carrier_off(dev); /* set Speed to 100Mbps */ /* disable auto negotiation and enable 100MBit Mode */ status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL); mdio_write(dev, mii_phy->phy_addr, - MII_CONTROL, (status & ~MII_CNTL_SPEED) | MII_CNTL_SPEED); + MII_CONTROL, (status & ~MII_CNTL_SPEED) | + MII_CNTL_SPEED); break; @@ -2086,12 +2118,14 @@ static void set_rx_mode(struct net_device *net_dev) for (i = 0; i < table_entries; i++) mc_filter[i] = 0xffff; } else { - /* Accept Broadcast packet, destination address matchs our MAC address, - use Receive Filter to reject unwanted MCAST packet */ + /* Accept Broadcast packet, destination address matchs our + * MAC address, use Receive Filter to reject unwanted MCAST + * packets */ struct dev_mc_list *mclist; rx_mode = RFAAB; - for (i = 0, mclist = net_dev->mc_list; mclist && i < net_dev->mc_count; - i++, mclist = mclist->next) { + for (i = 0, mclist = net_dev->mc_list; + mclist && i < net_dev->mc_count; + i++, mclist = mclist->next) { unsigned int bit_nr = sis900_mcast_bitnr(mclist->dmi_addr, revision); mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf)); @@ -2107,7 +2141,8 @@ static void set_rx_mode(struct net_device *net_dev) outl(RFEN | rx_mode, ioaddr + rfcr); - /* sis900 is capatable of looping back packet at MAC level for debugging purpose */ + /* sis900 is capable of looping back packets at MAC level for + * debugging purpose */ if (net_dev->flags & IFF_LOOPBACK) { u32 cr_saved; /* We must disable Tx/Rx before setting loopback mode */ @@ -2192,7 +2227,6 @@ static void __devexit sis900_remove(struct pci_dev *pci_dev) static int sis900_suspend(struct pci_dev *pci_dev, u32 state) { struct net_device *net_dev = pci_get_drvdata(pci_dev); - struct sis900_private *sis_priv = net_dev->priv; long ioaddr = net_dev->base_addr; if(!netif_running(net_dev)) @@ -2205,7 +2239,7 @@ static int sis900_suspend(struct pci_dev *pci_dev, u32 state) outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr); pci_set_power_state(pci_dev, 3); - pci_save_state(pci_dev, sis_priv->pci_state); + pci_save_state(pci_dev); return 0; } @@ -2218,7 +2252,7 @@ static int sis900_resume(struct pci_dev *pci_dev) if(!netif_running(net_dev)) return 0; - pci_restore_state(pci_dev, sis_priv->pci_state); + pci_restore_state(pci_dev); pci_set_power_state(pci_dev, 0); sis900_init_rxfilter(net_dev);